From fb146684fa9e7b960de0c52d55fc3e04d71ee13c Mon Sep 17 00:00:00 2001 From: Selene ToyKeeper Date: Mon, 3 Jul 2023 02:54:09 -0600 Subject: added Noctigon M44 sources (oops, forgot to do this earlier) (files are dated 2023-05-30) --- hwdef-noctigon-m44.h | 207 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 207 insertions(+) create mode 100644 hwdef-noctigon-m44.h (limited to 'hwdef-noctigon-m44.h') diff --git a/hwdef-noctigon-m44.h b/hwdef-noctigon-m44.h new file mode 100644 index 0000000..02b5904 --- /dev/null +++ b/hwdef-noctigon-m44.h @@ -0,0 +1,207 @@ +// hwdef for Noctigon M44 2-channel light +// Copyright (C) 2023 Selene ToyKeeper +// SPDX-License-Identifier: GPL-3.0-or-later +#pragma once + +/* + * Pin / Name / Function + * 1 PA6 ch2 LED PWM (boost) (PWM1B) + * 2 PA5 R: red aux LED (PWM0B) + * 3 PA4 G: green aux LED + * 4 PA3 B: blue aux LED + * 5 PA2 button LED + * 6 PA1 (none) + * 7 PA0 Opamp 2 enable (channel 2 LEDs) + * 8 GND GND + * 9 VCC VCC + * 10 PC5 (none) + * 11 PC4 (none) + * 12 PC3 RESET + * 13 PC2 (none) + * 14 PC1 SCK + * 15 PC0 (none) + * 16 PB3 ch1 LED PWM (linear) (PWM1A) + * 17 PB2 MISO + * 18 PB1 MOSI / battery voltage (ADC6) + * 19 PB0 Opamp 1 enable (channel 1 LEDs) + * 20 PA7 e-switch (PCINT7) + * ADC12 thermal sensor + */ + +#define HWDEF_C_FILE hwdef-noctigon-m44.c + +#define ATTINY 1634 +#include + +// channel modes: +// * 0. channel 1 only +// * 1. channel 2 only +// * 2. both channels, tied together +// * 3. both channels, manual blend +// * 4? both channels, manual blend, max 200% power +// * 4. both channels, auto blend, reversible +#define NUM_CHANNEL_MODES 5 +#define CM_CH1 0 +#define CM_CH2 1 +#define CM_BOTH 2 +#define CM_BLEND 3 +#define CM_AUTO 4 +// TODO: Add RGB aux channel modes + +#define CHANNEL_MODES_ENABLED 0b00011111 +#define CHANNEL_HAS_ARGS 0b00011000 +// _, _, _, 128=middle CCT, 0=warm-to-cool +#define CHANNEL_MODE_ARGS 0,0,0,128,0 + +#define USE_CHANNEL_MODES +#define USE_CHANNEL_MODE_ARGS +#define SET_LEVEL_MODES set_level_ch1, \ + set_level_ch2, \ + set_level_both, \ + set_level_blend, \ + set_level_auto +// gradual ticking for thermal regulation +#define GRADUAL_TICK_MODES gradual_tick_ch1, \ + gradual_tick_ch2, \ + gradual_tick_both, \ + gradual_tick_blend, \ + gradual_tick_auto +// can use some of the common handlers +#define USE_CALC_2CH_BLEND + + +#define PWM_CHANNELS 1 // old, remove this + +#define PWM_BITS 16 // 0 to 16383 at variable Hz, not 0 to 255 at 16 kHz +#define PWM_GET PWM_GET16 +#define PWM_DATATYPE uint16_t +#define PWM_DATATYPE2 uint32_t // only needs 32-bit if ramp values go over 255 +#define PWM1_DATATYPE uint16_t // regular ramp table +//#define PWM2_DATATYPE uint16_t // max "200% power" ramp table +//#define PWM3_DATATYPE uint16_t // PWM_TOPs for 2nd ramp table + +// PWM parameters of both channels are tied together because they share a counter +#define PWM_TOP ICR1 // holds the TOP value for for variable-resolution PWM +#define PWM_TOP_INIT 511 +#define PWM_CNT TCNT1 // for dynamic PWM, reset phase + +#define CH1_PIN PB3 // pin 16, Opamp reference +#define CH1_PWM OCR1A // OCR1A is the output compare register for PB3 +#define CH1_ENABLE_PIN PB0 // pin 19, Opamp power +#define CH1_ENABLE_PORT PORTB // control port for PB0 + +#define CH2_PIN PA6 // pin 1, 2nd LED Opamp reference +#define CH2_PWM OCR1B // OCR1B is the output compare register for PA6 +#define CH2_ENABLE_PIN PA0 // pin 7, Opamp power +#define CH2_ENABLE_PORT PORTA // control port for PA0 + + +#ifndef SWITCH_PIN +#define SWITCH_PIN PA7 // pin 20 +#define SWITCH_PCINT PCINT7 // pin 20 pin change interrupt +#define SWITCH_PCIE PCIE0 // PCIE1 is for PCINT[7:0] +#define SWITCH_PCMSK PCMSK0 // PCMSK1 is for PCINT[7:0] +#define SWITCH_PORT PINA // PINA or PINB or PINC +#define SWITCH_PUE PUEA // pullup group A +#define PCINT_vect PCINT0_vect // ISR for PCINT[7:0] +#endif + +#define USE_VOLTAGE_DIVIDER // use a dedicated pin, not VCC, because VCC input is flattened +#define VOLTAGE_PIN PB1 // Pin 18 / PB1 / ADC6 +// pin to ADC mappings are in DS table 19-4 +#define VOLTAGE_ADC ADC6D // digital input disable pin for PB1 +// DIDR0/DIDR1 mappings are in DS section 19.13.5, 19.13.6 +#define VOLTAGE_ADC_DIDR DIDR1 // DIDR channel for ADC6D +// DS tables 19-3, 19-4 +// Bit 7 6 5 4 3 2 1 0 +// REFS1 REFS0 REFEN ADC0EN MUX3 MUX2 MUX1 MUX0 +// MUX[3:0] = 0, 1, 1, 0 for ADC6 / PB1 +// divided by ... +// REFS[1:0] = 1, 0 for internal 1.1V reference +// other bits reserved +#define ADMUX_VOLTAGE_DIVIDER 0b10000110 +#define ADC_PRSCL 0x07 // clk/128 + +// Raw ADC readings at 4.4V and 2.2V +// calibrate the voltage readout here +// estimated / calculated values are: +// (voltage - D1) * (R2/(R2+R1) * 1024 / 1.1) +// D1, R1, R2 = 0, 330, 100 +#ifndef ADC_44 +//#define ADC_44 981 // raw value at 4.40V +#define ADC_44 967 // manually tweaked so 4.16V will blink out 4.2 +#endif +#ifndef ADC_22 +//#define ADC_22 489 // raw value at 2.20V +#define ADC_22 482 // manually tweaked so 4.16V will blink out 4.2 +#endif + +// this light has aux LEDs under the optic +#define AUXLED_R_PIN PA5 // pin 2 +#define AUXLED_G_PIN PA4 // pin 3 +#define AUXLED_B_PIN PA3 // pin 4 +#define AUXLED_RGB_PORT PORTA // PORTA or PORTB or PORTC +#define AUXLED_RGB_DDR DDRA // DDRA or DDRB or DDRC +#define AUXLED_RGB_PUE PUEA // PUEA or PUEB or PUEC + +#define BUTTON_LED_PIN PA2 // pin 5 +#define BUTTON_LED_PORT PORTA // for all "PA" pins +#define BUTTON_LED_DDR DDRA // for all "PA" pins +#define BUTTON_LED_PUE PUEA // for all "PA" pins + + +void set_level_ch1(uint8_t level); +void set_level_ch2(uint8_t level); +void set_level_both(uint8_t level); +void set_level_blend(uint8_t level); +void set_level_auto(uint8_t level); + +bool gradual_tick_ch1(uint8_t gt); +bool gradual_tick_ch2(uint8_t gt); +bool gradual_tick_both(uint8_t gt); +bool gradual_tick_blend(uint8_t gt); +bool gradual_tick_auto(uint8_t gt); + + +// with so many pins, doing this all with #ifdefs gets awkward... +// ... so just hardcode it in each hwdef file instead +inline void hwdef_setup() { + // enable output ports + //DDRC = (1 << CH3_PIN); + DDRB = (1 << CH1_PIN) + | (1 << CH1_ENABLE_PIN) + ; + DDRA = (1 << CH2_PIN) + | (1 << CH2_ENABLE_PIN) + | (1 << AUXLED_R_PIN) + | (1 << AUXLED_G_PIN) + | (1 << AUXLED_B_PIN) + | (1 << BUTTON_LED_PIN) + ; + + // configure PWM + // Setup PWM. F_pwm = F_clkio / 2 / N / TOP, where N = prescale factor, TOP = top of counter + // pre-scale for timer: N = 1 + // Linear opamp PWM for both main and 2nd LEDs (10-bit) + // WGM1[3:0]: 1,0,1,0: PWM, Phase Correct, adjustable (DS table 12-5) + // CS1[2:0]: 0,0,1: clk/1 (No prescaling) (DS table 12-6) + // COM1A[1:0]: 1,0: PWM OC1A in the normal direction (DS table 12-4) + // COM1B[1:0]: 1,0: PWM OC1B in the normal direction (DS table 12-4) + TCCR1A = (1<