From 7cb4fe0944b839f28dfd96a88a772cd6a8b58019 Mon Sep 17 00:00:00 2001
From: Selene ToyKeeper
Date: Thu, 2 Nov 2023 17:16:25 -0600
Subject: reorganized project files (part 1) (just moved files, didn't change
 the contents yet,  and nothing will work without updating #includes and build
 scripts and stuff)

---
 spaghetti-monster/fsm-main.c | 211 -------------------------------------------
 1 file changed, 211 deletions(-)
 delete mode 100644 spaghetti-monster/fsm-main.c

(limited to 'spaghetti-monster/fsm-main.c')

diff --git a/spaghetti-monster/fsm-main.c b/spaghetti-monster/fsm-main.c
deleted file mode 100644
index 066188c..0000000
--- a/spaghetti-monster/fsm-main.c
+++ /dev/null
@@ -1,211 +0,0 @@
-// fsm-main.c: main() function for SpaghettiMonster.
-// Copyright (C) 2017-2023 Selene ToyKeeper
-// SPDX-License-Identifier: GPL-3.0-or-later
-
-#pragma once
-
-#include "fsm-main.h"
-
-#if PWM_CHANNELS == 4
-#ifdef AVRXMEGA3  // ATTINY816, 817, etc
-#error 4-channel PWM not currently set up for the AVR 1-Series
-#endif
-// 4th PWM channel requires manually turning the pin on/off via interrupt :(
-ISR(TIMER1_OVF_vect) {
-    //bitClear(PORTB, 3);
-    PORTB &= 0b11110111;
-    //PORTB |= 0b00001000;
-}
-ISR(TIMER1_COMPA_vect) {
-    //if (!bitRead(TIFR,TOV1)) bitSet(PORTB, 3);
-    if (! (TIFR & (1<<TOV1))) PORTB |= 0b00001000;
-    //if (! (TIFR & (1<<TOV1))) PORTB &= 0b11110111;
-}
-#endif
-
-// FIXME: hw_setup() shouldn't be here ... move it entirely to hwdef files
-#if (ATTINY == 25) || (ATTINY == 45) || (ATTINY == 85)
-static inline void hw_setup() {
-    #if !defined(USE_GENERIC_HWDEF_SETUP)
-        hwdef_setup();
-    #else
-        // configure PWM channels
-        #if PWM_CHANNELS >= 1
-            DDRB |= (1 << PWM1_PIN);
-            TCCR0B = 0x01; // pre-scaler for timer (1 => 1, 2 => 8, 3 => 64...)
-            TCCR0A = PHASE;
-            #if (PWM1_PIN == PB4) // Second PWM counter is ... weird
-                TCCR1 = _BV (CS10);
-                GTCCR = _BV (COM1B1) | _BV (PWM1B);
-                OCR1C = 255;  // Set ceiling value to maximum
-            #endif
-        #endif
-        // tint ramping needs second channel enabled,
-        // despite PWM_CHANNELS being only 1
-        #if (PWM_CHANNELS >= 2) || defined(USE_TINT_RAMPING)
-            DDRB |= (1 << PWM2_PIN);
-            #if (PWM2_PIN == PB4) // Second PWM counter is ... weird
-                TCCR1 = _BV (CS10);
-                GTCCR = _BV (COM1B1) | _BV (PWM1B);
-                OCR1C = 255;  // Set ceiling value to maximum
-            #endif
-        #endif
-        #if PWM_CHANNELS >= 3
-            DDRB |= (1 << PWM3_PIN);
-            #if (PWM3_PIN == PB4) // Second PWM counter is ... weird
-                TCCR1 = _BV (CS10);
-                GTCCR = _BV (COM1B1) | _BV (PWM1B);
-                OCR1C = 255;  // Set ceiling value to maximum
-            #endif
-        #endif
-        #if PWM_CHANNELS >= 4
-            // 4th PWM channel is ... not actually supported in hardware  :(
-            DDRB |= (1 << PWM4_PIN);
-            //OCR1C = 255;  // Set ceiling value to maximum
-            TCCR1 = 1<<CTC1 | 1<<PWM1A | 3<<COM1A0 | 2<<CS10;
-            GTCCR = (2<<COM1B0) | (1<<PWM1B);
-            // set up an interrupt to control PWM4 pin
-            TIMSK |= (1<<OCIE1A) | (1<<TOIE1);
-        #endif
-
-        // configure e-switch
-        PORTB = (1 << SWITCH_PIN);  // e-switch is the only input
-        PCMSK = (1 << SWITCH_PIN);  // pin change interrupt uses this pin
-    #endif  // ifdef USE_GENERIC_HWDEF_SETUP
-}
-#elif (ATTINY == 1634) || defined(AVRXMEGA3)  // ATTINY816, 817, etc
-static inline void hw_setup() {
-    // this gets tricky with so many pins...
-    // ... so punt it to the hwdef file
-    hwdef_setup();
-}
-#else
-    #error Unrecognized MCU type
-#endif
-
-
-//#ifdef USE_REBOOT
-static inline void prevent_reboot_loop() {
-    // prevent WDT from rebooting MCU again
-    #ifdef AVRXMEGA3  // ATTINY816, 817, etc
-    RSTCTRL.RSTFR &= ~(RSTCTRL_WDRF_bm);  // reset status flag
-    #else
-    MCUSR &= ~(1<<WDRF);  // reset status flag
-    #endif
-    wdt_disable();
-}
-//#endif
-
-
-int main() {
-    // Don't allow interrupts while booting
-    cli();
-
-    //#ifdef USE_REBOOT
-    // prevents cycling after a crash,
-    // whether intentional (like factory reset) or not (bugs)
-    prevent_reboot_loop();
-    //#endif
-
-    hw_setup();
-
-    #if 0
-    #ifdef HALFSPEED
-    // run at half speed
-    // FIXME: not portable (also not needed)
-    CLKPR = 1<<CLKPCE;
-    CLKPR = 1;
-    #endif
-    #endif
-
-    #ifdef USE_DEBUG_BLINK
-    //debug_blink(1);
-    #endif
-
-    // all booted -- turn interrupts back on
-    PCINT_on();
-    WDT_on();
-    ADC_on();
-    sei();
-
-    // in case any spurious button presses were detected at boot
-    #ifdef USE_DELAY_MS
-    delay_ms(1);
-    #else
-    delay_4ms(1);
-    #endif
-
-    // fallback for handling a few things
-    #ifndef DONT_USE_DEFAULT_STATE
-    push_state(default_state, 0);
-    nice_delay_interrupt = 0;
-    #endif
-
-    // call recipe's setup
-    setup();
-
-    // main loop
-    while (1) {
-        // if event queue not empty, empty it
-        process_emissions();
-
-        // if loop() tried to change state, process that now
-        StatePtr df = deferred_state;
-        if (df) {
-            set_state(df, deferred_state_arg);
-            deferred_state = NULL;
-            //deferred_state_arg = 0;  // unnecessary
-        }
-
-        // enter standby mode if requested
-        // (works better if deferred like this)
-        if (go_to_standby) {
-            #ifdef USE_RAMPING
-            set_level(0);
-            #else
-            #if PWM_CHANNELS >= 1
-            PWM1_LVL = 0;
-            #endif
-            #if PWM_CHANNELS >= 2
-            PWM2_LVL = 0;
-            #endif
-            #if PWM_CHANNELS >= 3
-            PWM3_LVL = 0;
-            #endif
-            #if PWM_CHANNELS >= 4
-            PWM4_LVL = 255;  // inverted  :(
-            #endif
-            #endif
-            standby_mode();
-        }
-
-        // catch up on interrupts
-        handle_deferred_interrupts();
-
-        // turn delays back on, if they were off
-        nice_delay_interrupt = 0;
-
-        // give the recipe some time slices
-        loop();
-
-    }
-}
-
-
-void handle_deferred_interrupts() {
-    /*
-    if (irq_pcint) {  // button pressed or released
-        // nothing to do here
-        // (PCINT only matters during standby)
-    }
-    */
-    if (irq_adc) {  // ADC done measuring
-        adc_deferred();
-        // irq_adc = 0;  // takes care of itself
-    }
-    if (irq_wdt) {  // the clock ticked
-        WDT_inner();
-        // irq_wdt = 0;  // takes care of itself
-    }
-}
-
-- 
cgit v1.2.3