From 7cb4fe0944b839f28dfd96a88a772cd6a8b58019 Mon Sep 17 00:00:00 2001 From: Selene ToyKeeper Date: Thu, 2 Nov 2023 17:16:25 -0600 Subject: reorganized project files (part 1) (just moved files, didn't change the contents yet, and nothing will work without updating #includes and build scripts and stuff) --- spaghetti-monster/werner/README | 56 ----------------------------------------- 1 file changed, 56 deletions(-) delete mode 100644 spaghetti-monster/werner/README (limited to 'spaghetti-monster/werner/README') diff --git a/spaghetti-monster/werner/README b/spaghetti-monster/werner/README deleted file mode 100644 index 5fe392d..0000000 --- a/spaghetti-monster/werner/README +++ /dev/null @@ -1,56 +0,0 @@ -This is a Werner-style interface for dual-switch lights -(e-switch + clicky switch). What that means is: - -While the clicky switch is off: - - - Click the clicky switch: Turn on, at the last-used level. The clicky - switch works as a momentary mode. - - - Click the clicky switch while holding the e-switch: Go into sort of a - utility mode. - -While on, in a normal steady mode: - - - Click the clicky switch: Turn off. - - - Click the e-switch: Brighter. One step per click. - - - Hold the e-switch: Dimmer. Keep holding to go down multiple steps. - -While in standby, in utility mode: - - - Click the e-switch: Turn on. - - - Hold the e-switch: Turn on at lowest level. - - - Double-click the e-switch: Turn on at highest level. - - - Triple-click the e-switch: Battery check mode. - - - Quad-click the e-switch: Ramp config mode. - -While in battery check mode: - - - Click either switch: Turn off. - - - Double-click the e-switch: Go to temperature check mode. - -While in temperature check mode: - - - Click either switch: Turn off. - - - Double-click the e-switch: Go to battery check mode. - - - Quad-click the e-switch: Go to thermal config mode. - -Ramp config mode and thermal config mode work the same as in Anduril or -RampingIOS V3. The options are: - - - Ramp config mode: - 1. Floor level. - 2. Ceiling level. - 3. Number of steps. - - - Thermal config mode: - 1. Calibrate sensor by entering current temperature in C. - 2. Set temperature limit to 30 C + N clicks. -- cgit v1.2.3