From 597b3457588dc8fb308b579846e686ef31477105 Mon Sep 17 00:00:00 2001 From: Selene ToyKeeper Date: Fri, 24 Sep 2021 05:18:42 -0600 Subject: copied Noctigon K1 -> MD11 to start defining a new light --- spaghetti-monster/anduril/cfg-noctigon-md11.h | 61 +++++++++++++++++++++++++++ 1 file changed, 61 insertions(+) create mode 100644 spaghetti-monster/anduril/cfg-noctigon-md11.h (limited to 'spaghetti-monster') diff --git a/spaghetti-monster/anduril/cfg-noctigon-md11.h b/spaghetti-monster/anduril/cfg-noctigon-md11.h new file mode 100644 index 0000000..fb2a89c --- /dev/null +++ b/spaghetti-monster/anduril/cfg-noctigon-md11.h @@ -0,0 +1,61 @@ +// Noctigon K1 config options for Anduril +#define MODEL_NUMBER "0251" +// (originally known as Emisar D1S v2) +#include "hwdef-Noctigon_K1.h" +#include "hank-cfg.h" +// ATTINY: 1634 + +// this light can safely run a bit hotter than most +#undef DEFAULT_THERM_CEIL +#define DEFAULT_THERM_CEIL 55 + +// this light has three aux LED channels: R, G, B +#define USE_AUX_RGB_LEDS +#define USE_AUX_RGB_LEDS_WHILE_ON +#define USE_INDICATOR_LED_WHILE_RAMPING + + +// ../../bin/level_calc.py cube 1 150 7135 1 4 1300 +// (with max_pwm set to 1023) +// (level 0 flickers and isn't relevant on a thrower, so it's omitted) +#define RAMP_LENGTH 150 +#define PWM1_LEVELS 1,1,2,2,3,3,4,4,5,6,6,7,8,9,10,11,12,13,14,15,16,17,18,20,21,23,24,26,27,29,31,32,34,36,38,40,43,45,47,49,52,54,57,60,62,65,68,71,74,77,81,84,87,91,95,98,102,106,110,114,118,122,127,131,136,141,145,150,155,160,166,171,176,182,188,193,199,205,211,218,224,231,237,244,251,258,265,272,280,287,295,303,310,319,327,335,344,352,361,370,379,388,397,407,416,426,436,446,457,467,477,488,499,510,521,533,544,556,568,580,592,604,617,629,642,655,668,682,695,709,723,737,751,766,781,795,810,826,841,857,872,888,904,921,937,954,971,988,1005,1023 +#define MAX_1x7135 50 + +// the entire ramp is regulated; don't blink halfway up +#ifdef BLINK_AT_RAMP_MIDDLE +#undef BLINK_AT_RAMP_MIDDLE +#endif + +// don't slow down at low levels; this isn't that sort of light +// (it needs to stay at full speed for the 10-bit PWM to work) +#ifdef USE_DYNAMIC_UNDERCLOCKING +#undef USE_DYNAMIC_UNDERCLOCKING +#endif + +#define RAMP_SMOOTH_FLOOR 1 +#define RAMP_SMOOTH_CEIL 130 +// 10, 30, [50], 70, 90, 110, 130 +#define RAMP_DISCRETE_FLOOR 10 +#define RAMP_DISCRETE_CEIL RAMP_SMOOTH_CEIL +#define RAMP_DISCRETE_STEPS 7 + +// safe limit ~75% power +#define SIMPLE_UI_FLOOR RAMP_DISCRETE_FLOOR +#define SIMPLE_UI_CEIL RAMP_DISCRETE_CEIL +#define SIMPLE_UI_STEPS 5 + +// make candle mode wobble more +#define CANDLE_AMPLITUDE 32 + +// stop panicking at ~70% power or ~600 lm +#define THERM_FASTER_LEVEL 130 + +#define THERM_RESPONSE_MAGNITUDE 32 // smaller adjustments, this host changes temperature slowly +#define THERM_NEXT_WARNING_THRESHOLD 32 // more error tolerance before adjusting + +// slow down party strobe; this driver can't pulse for 1ms or less +#define PARTY_STROBE_ONTIME 2 + +#define THERM_CAL_OFFSET 5 + -- cgit v1.2.3 From acf62345e94439df0212c388d5e7143a50005825 Mon Sep 17 00:00:00 2001 From: Selene ToyKeeper Date: Fri, 24 Sep 2021 05:28:15 -0600 Subject: just a few adjustments to start with --- spaghetti-monster/anduril/cfg-noctigon-md11.h | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) (limited to 'spaghetti-monster') diff --git a/spaghetti-monster/anduril/cfg-noctigon-md11.h b/spaghetti-monster/anduril/cfg-noctigon-md11.h index fb2a89c..ba72607 100644 --- a/spaghetti-monster/anduril/cfg-noctigon-md11.h +++ b/spaghetti-monster/anduril/cfg-noctigon-md11.h @@ -1,18 +1,17 @@ -// Noctigon K1 config options for Anduril -#define MODEL_NUMBER "0251" -// (originally known as Emisar D1S v2) -#include "hwdef-Noctigon_K1.h" +// Noctigon MD11 config options for Anduril +#define MODEL_NUMBER "0271" +#include "hwdef-Noctigon_MD11.h" #include "hank-cfg.h" // ATTINY: 1634 -// this light can safely run a bit hotter than most -#undef DEFAULT_THERM_CEIL -#define DEFAULT_THERM_CEIL 55 - // this light has three aux LED channels: R, G, B #define USE_AUX_RGB_LEDS -#define USE_AUX_RGB_LEDS_WHILE_ON -#define USE_INDICATOR_LED_WHILE_RAMPING +// ... and a single LED in the button +#define USE_BUTTON_LED +// don't use aux LEDs while main LED is on +#ifdef USE_INDICATOR_LED_WHILE_RAMPING +#undef USE_INDICATOR_LED_WHILE_RAMPING +#endif // ../../bin/level_calc.py cube 1 150 7135 1 4 1300 @@ -51,8 +50,8 @@ // stop panicking at ~70% power or ~600 lm #define THERM_FASTER_LEVEL 130 -#define THERM_RESPONSE_MAGNITUDE 32 // smaller adjustments, this host changes temperature slowly -#define THERM_NEXT_WARNING_THRESHOLD 32 // more error tolerance before adjusting +//#define THERM_RESPONSE_MAGNITUDE 32 // smaller adjustments, this host changes temperature slowly +//#define THERM_NEXT_WARNING_THRESHOLD 32 // more error tolerance before adjusting // slow down party strobe; this driver can't pulse for 1ms or less #define PARTY_STROBE_ONTIME 2 -- cgit v1.2.3 From fd50e9006451b8cad45560b84aa9a40b39e88cca Mon Sep 17 00:00:00 2001 From: Selene ToyKeeper Date: Fri, 24 Sep 2021 05:45:26 -0600 Subject: added dynamic PWM and FET to MD11 --- spaghetti-monster/anduril/cfg-noctigon-md11.h | 39 +++++++++++++++++---------- 1 file changed, 25 insertions(+), 14 deletions(-) (limited to 'spaghetti-monster') diff --git a/spaghetti-monster/anduril/cfg-noctigon-md11.h b/spaghetti-monster/anduril/cfg-noctigon-md11.h index ba72607..ea768af 100644 --- a/spaghetti-monster/anduril/cfg-noctigon-md11.h +++ b/spaghetti-monster/anduril/cfg-noctigon-md11.h @@ -14,25 +14,28 @@ #endif -// ../../bin/level_calc.py cube 1 150 7135 1 4 1300 -// (with max_pwm set to 1023) -// (level 0 flickers and isn't relevant on a thrower, so it's omitted) +// power channels: +// - linear: 5A? +// - FET: DD #define RAMP_LENGTH 150 -#define PWM1_LEVELS 1,1,2,2,3,3,4,4,5,6,6,7,8,9,10,11,12,13,14,15,16,17,18,20,21,23,24,26,27,29,31,32,34,36,38,40,43,45,47,49,52,54,57,60,62,65,68,71,74,77,81,84,87,91,95,98,102,106,110,114,118,122,127,131,136,141,145,150,155,160,166,171,176,182,188,193,199,205,211,218,224,231,237,244,251,258,265,272,280,287,295,303,310,319,327,335,344,352,361,370,379,388,397,407,416,426,436,446,457,467,477,488,499,510,521,533,544,556,568,580,592,604,617,629,642,655,668,682,695,709,723,737,751,766,781,795,810,826,841,857,872,888,904,921,937,954,971,988,1005,1023 -#define MAX_1x7135 50 +#define USE_DYN_PWM +// maxreg at 130, dynamic PWM: level_calc.py 5.01 2 149 7135 1 0.3 1740 FET 1 10 3190 --pwm dyn:64:16384:255 +// (plus one extra level at the beginning for moon) +#define PWM1_LEVELS 0,1,1,2,2,3,4,5,6,7,8,9,11,12,14,16,17,19,22,24,26,29,31,34,37,40,43,46,49,53,56,60,63,67,71,74,78,82,86,89,93,96,99,103,105,108,110,112,114,115,116,116,115,114,112,109,106,101,95,89,81,71,60,48,34,19,20,21,22,23,24,26,27,28,30,31,32,34,36,37,39,41,43,45,47,49,51,53,56,58,61,63,66,69,72,75,78,81,84,88,91,95,99,103,107,111,115,119,124,129,133,138,143,149,154,159,165,171,177,183,189,196,203,210,217,224,231,239,247,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0 +#define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,9,20,30,41,52,63,75,87,99,112,125,138,151,165,179,194,208,224,239,255 +#define PWM_TOPS 16383,16383,11750,14690,9183,12439,13615,13955,13877,13560,13093,12529,13291,12513,12756,12769,11893,11747,12085,11725,11329,11316,10851,10713,10518,10282,10016,9729,9428,9298,8971,8794,8459,8257,8043,7715,7497,7275,7052,6753,6538,6260,5994,5798,5501,5271,5006,4758,4525,4268,4030,3775,3508,3263,3010,2752,2517,2256,1998,1763,1512,1249,994,749,497,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255 -// the entire ramp is regulated; don't blink halfway up +#define MAX_1x7135 130 +#define DEFAULT_LEVEL 50 +#define HALFSPEED_LEVEL 12 +#define QUARTERSPEED_LEVEL 4 + +// don't blink halfway up #ifdef BLINK_AT_RAMP_MIDDLE #undef BLINK_AT_RAMP_MIDDLE #endif -// don't slow down at low levels; this isn't that sort of light -// (it needs to stay at full speed for the 10-bit PWM to work) -#ifdef USE_DYNAMIC_UNDERCLOCKING -#undef USE_DYNAMIC_UNDERCLOCKING -#endif - -#define RAMP_SMOOTH_FLOOR 1 +#define RAMP_SMOOTH_FLOOR 10 // low levels may be unreliable #define RAMP_SMOOTH_CEIL 130 // 10, 30, [50], 70, 90, 110, 130 #define RAMP_DISCRETE_FLOOR 10 @@ -54,7 +57,15 @@ //#define THERM_NEXT_WARNING_THRESHOLD 32 // more error tolerance before adjusting // slow down party strobe; this driver can't pulse for 1ms or less -#define PARTY_STROBE_ONTIME 2 +// (only needed on no-FET build) +//#define PARTY_STROBE_ONTIME 2 #define THERM_CAL_OFFSET 5 +// the power regulator is a bit slow, so push it harder for a quick response from off +#define DEFAULT_JUMP_START_LEVEL 21 +//#define BLINK_BRIGHTNESS DEFAULT_LEVEL +//#define BLINK_ONCE_TIME 12 + +// can't reset the normal way because power is connected before the button +#define USE_SOFT_FACTORY_RESET -- cgit v1.2.3 From 7b10abf65af61b827e01e215155045a92278599b Mon Sep 17 00:00:00 2001 From: Selene ToyKeeper Date: Fri, 24 Sep 2021 06:23:08 -0600 Subject: added MD11-noFET, tweaked values in MD11-FET build too --- .../anduril/cfg-noctigon-md11-nofet.h | 42 ++++++++++++++++++++++ spaghetti-monster/anduril/cfg-noctigon-md11.h | 7 ++-- 2 files changed, 46 insertions(+), 3 deletions(-) create mode 100644 spaghetti-monster/anduril/cfg-noctigon-md11-nofet.h (limited to 'spaghetti-monster') diff --git a/spaghetti-monster/anduril/cfg-noctigon-md11-nofet.h b/spaghetti-monster/anduril/cfg-noctigon-md11-nofet.h new file mode 100644 index 0000000..0efe85f --- /dev/null +++ b/spaghetti-monster/anduril/cfg-noctigon-md11-nofet.h @@ -0,0 +1,42 @@ +// Noctigon MD11-noFET config options for Anduril +#include "cfg-noctigon-md11.h" +#undef MODEL_NUMBER +#define MODEL_NUMBER "0272" +// ATTINY: 1634 + +// turn off the DD FET +#undef PWM_CHANNELS +#define PWM_CHANNELS 1 + +// level_calc.py 5.01 1 149 7135 1 0.3 1740 --pwm dyn:78:16384:255 +#undef PWM1_LEVELS +#define PWM1_LEVELS 0,1,1,1,2,3,3,4,5,6,7,8,9,10,11,13,14,16,17,19,21,23,25,27,29,31,34,36,39,42,44,47,50,53,57,60,63,67,70,74,77,81,85,88,92,96,99,103,107,110,113,117,120,123,126,128,130,133,134,136,137,137,137,137,136,135,133,130,126,122,117,111,104,96,87,76,65,52,38,22,23,25,26,27,28,29,30,32,33,34,36,37,39,40,42,43,45,47,49,51,53,55,57,59,61,63,66,68,70,73,76,78,81,84,87,90,93,96,99,103,106,110,113,117,121,125,129,133,137,142,146,151,155,160,165,170,175,181,186,192,197,203,209,215,222,228,234,241,248,255 +#undef PWM2_LEVELS +#undef PWM_TOPS +#define PWM_TOPS 16383,16383,12404,8140,11462,14700,11041,12947,13795,14111,14124,13946,13641,13248,12791,13418,12808,13057,12385,12428,12358,12209,12000,11746,11459,11147,11158,10793,10708,10576,10173,9998,9800,9585,9527,9278,9023,8901,8634,8486,8216,8053,7881,7615,7440,7261,7009,6832,6656,6422,6196,6031,5819,5615,5419,5190,4973,4803,4571,4386,4179,3955,3745,3549,3340,3145,2940,2729,2513,2312,2109,1903,1697,1491,1286,1070,871,662,459,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255 +#undef DEFAULT_LEVEL +#define DEFAULT_LEVEL 50 +#undef MAX_1x7135 +#define MAX_1x7135 150 + +// make candle mode wobble more +#ifdef CANDLE_AMPLITUDE +#undef CANDLE_AMPLITUDE +#endif +#define CANDLE_AMPLITUDE 35 + + +// slow down party strobe; this driver can't pulse for 1ms or less +// (only needed on no-FET build) +#define PARTY_STROBE_ONTIME 2 + +// jump start a bit higher than base driver +#undef DEFAULT_JUMP_START_LEVEL +#define DEFAULT_JUMP_START_LEVEL 25 + +// stop panicking at ~70% power or ~600 lm +#undef THERM_FASTER_LEVEL +#define THERM_FASTER_LEVEL 130 +#undef MIN_THERM_STEPDOWN +#define MIN_THERM_STEPDOWN 80 // must be > end of dynamic PWM range + diff --git a/spaghetti-monster/anduril/cfg-noctigon-md11.h b/spaghetti-monster/anduril/cfg-noctigon-md11.h index ea768af..130e05c 100644 --- a/spaghetti-monster/anduril/cfg-noctigon-md11.h +++ b/spaghetti-monster/anduril/cfg-noctigon-md11.h @@ -48,10 +48,11 @@ #define SIMPLE_UI_STEPS 5 // make candle mode wobble more -#define CANDLE_AMPLITUDE 32 +#define CANDLE_AMPLITUDE 30 // stop panicking at ~70% power or ~600 lm #define THERM_FASTER_LEVEL 130 +#define MIN_THERM_STEPDOWN 66 // must be > end of dynamic PWM range //#define THERM_RESPONSE_MAGNITUDE 32 // smaller adjustments, this host changes temperature slowly //#define THERM_NEXT_WARNING_THRESHOLD 32 // more error tolerance before adjusting @@ -64,8 +65,8 @@ // the power regulator is a bit slow, so push it harder for a quick response from off #define DEFAULT_JUMP_START_LEVEL 21 -//#define BLINK_BRIGHTNESS DEFAULT_LEVEL -//#define BLINK_ONCE_TIME 12 +#define BLINK_BRIGHTNESS DEFAULT_LEVEL +#define BLINK_ONCE_TIME 12 // can't reset the normal way because power is connected before the button #define USE_SOFT_FACTORY_RESET -- cgit v1.2.3 From 16de2bade47b0e11495e06bfdb702dc346f8c5bc Mon Sep 17 00:00:00 2001 From: Selene ToyKeeper Date: Mon, 4 Oct 2021 02:54:48 -0600 Subject: added early initial attempt at a boost/12V/6V version of the MD11 (had to guess about some hardware details, unsure if correct) --- spaghetti-monster/anduril/cfg-noctigon-md11-12v.h | 70 +++++++++++++++++++++++ 1 file changed, 70 insertions(+) create mode 100644 spaghetti-monster/anduril/cfg-noctigon-md11-12v.h (limited to 'spaghetti-monster') diff --git a/spaghetti-monster/anduril/cfg-noctigon-md11-12v.h b/spaghetti-monster/anduril/cfg-noctigon-md11-12v.h new file mode 100644 index 0000000..1c90ab1 --- /dev/null +++ b/spaghetti-monster/anduril/cfg-noctigon-md11-12v.h @@ -0,0 +1,70 @@ +// Noctigon MD11 (12V) config options for Anduril +#define MODEL_NUMBER "0273" +#include "hwdef-Noctigon_MD11-12V.h" +#include "hank-cfg.h" +// ATTINY: 1634 + +// this light has three aux LED channels: R, G, B +#define USE_AUX_RGB_LEDS +// ... and a single LED in the button +#define USE_BUTTON_LED +// don't use aux LEDs while main LED is on +#ifdef USE_INDICATOR_LED_WHILE_RAMPING +#undef USE_INDICATOR_LED_WHILE_RAMPING +#endif + + +// power channels: +// - linear: 5A? +// - DD FET: none (can't do DD on a boost driver) +#define RAMP_LENGTH 150 +#define USE_DYN_PWM + +// level_calc.py 5.01 1 149 7135 1 0.3 1740 --pwm dyn:78:16384:255 +#define PWM1_LEVELS 0,1,1,1,2,3,3,4,5,6,7,8,9,10,11,13,14,16,17,19,21,23,25,27,29,31,34,36,39,42,44,47,50,53,57,60,63,67,70,74,77,81,85,88,92,96,99,103,107,110,113,117,120,123,126,128,130,133,134,136,137,137,137,137,136,135,133,130,126,122,117,111,104,96,87,76,65,52,38,22,23,25,26,27,28,29,30,32,33,34,36,37,39,40,42,43,45,47,49,51,53,55,57,59,61,63,66,68,70,73,76,78,81,84,87,90,93,96,99,103,106,110,113,117,121,125,129,133,137,142,146,151,155,160,165,170,175,181,186,192,197,203,209,215,222,228,234,241,248,255 +#define PWM_TOPS 16383,16383,12404,8140,11462,14700,11041,12947,13795,14111,14124,13946,13641,13248,12791,13418,12808,13057,12385,12428,12358,12209,12000,11746,11459,11147,11158,10793,10708,10576,10173,9998,9800,9585,9527,9278,9023,8901,8634,8486,8216,8053,7881,7615,7440,7261,7009,6832,6656,6422,6196,6031,5819,5615,5419,5190,4973,4803,4571,4386,4179,3955,3745,3549,3340,3145,2940,2729,2513,2312,2109,1903,1697,1491,1286,1070,871,662,459,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255 +#define DEFAULT_LEVEL 50 +#define MAX_1x7135 150 + +#define HALFSPEED_LEVEL 12 +#define QUARTERSPEED_LEVEL 4 + +// don't blink halfway up +#ifdef BLINK_AT_RAMP_MIDDLE +#undef BLINK_AT_RAMP_MIDDLE +#endif + +#define RAMP_SMOOTH_FLOOR 10 // low levels may be unreliable +#define RAMP_SMOOTH_CEIL 130 +// 10, 30, [50], 70, 90, 110, 130 +#define RAMP_DISCRETE_FLOOR 10 +#define RAMP_DISCRETE_CEIL RAMP_SMOOTH_CEIL +#define RAMP_DISCRETE_STEPS 7 + +// safe limit ~75% power +#define SIMPLE_UI_FLOOR RAMP_DISCRETE_FLOOR +#define SIMPLE_UI_CEIL RAMP_DISCRETE_CEIL +#define SIMPLE_UI_STEPS 5 + +// make candle mode wobble more +#define CANDLE_AMPLITUDE 30 + +// stop panicking at ~70% power or ~600 lm +#define THERM_FASTER_LEVEL 130 +#define MIN_THERM_STEPDOWN 80 // must be > end of dynamic PWM range + +//#define THERM_RESPONSE_MAGNITUDE 32 // smaller adjustments, this host changes temperature slowly +//#define THERM_NEXT_WARNING_THRESHOLD 32 // more error tolerance before adjusting + +// slow down party strobe; this driver can't pulse for 1ms or less +#define PARTY_STROBE_ONTIME 4 + +#define THERM_CAL_OFFSET 5 + +// the power regulator is a bit slow, so push it harder for a quick response from off +#define DEFAULT_JUMP_START_LEVEL 21 +#define BLINK_BRIGHTNESS DEFAULT_LEVEL +#define BLINK_ONCE_TIME 12 + +// added for convenience +#define USE_SOFT_FACTORY_RESET -- cgit v1.2.3 From 05e4a4f94af32d18388e13c1be7ef40174ba749e Mon Sep 17 00:00:00 2001 From: Selene ToyKeeper Date: Tue, 12 Oct 2021 16:39:00 -0600 Subject: renamed MD11 -> DM11 because Hank changed the product name --- spaghetti-monster/anduril/cfg-noctigon-dm11-12v.h | 70 +++++++++++++++++++++ .../anduril/cfg-noctigon-dm11-nofet.h | 42 +++++++++++++ spaghetti-monster/anduril/cfg-noctigon-dm11.h | 72 ++++++++++++++++++++++ spaghetti-monster/anduril/cfg-noctigon-md11-12v.h | 70 --------------------- .../anduril/cfg-noctigon-md11-nofet.h | 42 ------------- spaghetti-monster/anduril/cfg-noctigon-md11.h | 72 ---------------------- 6 files changed, 184 insertions(+), 184 deletions(-) create mode 100644 spaghetti-monster/anduril/cfg-noctigon-dm11-12v.h create mode 100644 spaghetti-monster/anduril/cfg-noctigon-dm11-nofet.h create mode 100644 spaghetti-monster/anduril/cfg-noctigon-dm11.h delete mode 100644 spaghetti-monster/anduril/cfg-noctigon-md11-12v.h delete mode 100644 spaghetti-monster/anduril/cfg-noctigon-md11-nofet.h delete mode 100644 spaghetti-monster/anduril/cfg-noctigon-md11.h (limited to 'spaghetti-monster') diff --git a/spaghetti-monster/anduril/cfg-noctigon-dm11-12v.h b/spaghetti-monster/anduril/cfg-noctigon-dm11-12v.h new file mode 100644 index 0000000..27af461 --- /dev/null +++ b/spaghetti-monster/anduril/cfg-noctigon-dm11-12v.h @@ -0,0 +1,70 @@ +// Noctigon DM11 (12V) config options for Anduril +#define MODEL_NUMBER "0273" +#include "hwdef-Noctigon_DM11-12V.h" +#include "hank-cfg.h" +// ATTINY: 1634 + +// this light has three aux LED channels: R, G, B +#define USE_AUX_RGB_LEDS +// ... and a single LED in the button +#define USE_BUTTON_LED +// don't use aux LEDs while main LED is on +#ifdef USE_INDICATOR_LED_WHILE_RAMPING +#undef USE_INDICATOR_LED_WHILE_RAMPING +#endif + + +// power channels: +// - linear: 5A? +// - DD FET: none (can't do DD on a boost driver) +#define RAMP_LENGTH 150 +#define USE_DYN_PWM + +// level_calc.py 5.01 1 149 7135 1 0.3 1740 --pwm dyn:78:16384:255 +#define PWM1_LEVELS 0,1,1,1,2,3,3,4,5,6,7,8,9,10,11,13,14,16,17,19,21,23,25,27,29,31,34,36,39,42,44,47,50,53,57,60,63,67,70,74,77,81,85,88,92,96,99,103,107,110,113,117,120,123,126,128,130,133,134,136,137,137,137,137,136,135,133,130,126,122,117,111,104,96,87,76,65,52,38,22,23,25,26,27,28,29,30,32,33,34,36,37,39,40,42,43,45,47,49,51,53,55,57,59,61,63,66,68,70,73,76,78,81,84,87,90,93,96,99,103,106,110,113,117,121,125,129,133,137,142,146,151,155,160,165,170,175,181,186,192,197,203,209,215,222,228,234,241,248,255 +#define PWM_TOPS 16383,16383,12404,8140,11462,14700,11041,12947,13795,14111,14124,13946,13641,13248,12791,13418,12808,13057,12385,12428,12358,12209,12000,11746,11459,11147,11158,10793,10708,10576,10173,9998,9800,9585,9527,9278,9023,8901,8634,8486,8216,8053,7881,7615,7440,7261,7009,6832,6656,6422,6196,6031,5819,5615,5419,5190,4973,4803,4571,4386,4179,3955,3745,3549,3340,3145,2940,2729,2513,2312,2109,1903,1697,1491,1286,1070,871,662,459,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255 +#define DEFAULT_LEVEL 50 +#define MAX_1x7135 150 + +#define HALFSPEED_LEVEL 12 +#define QUARTERSPEED_LEVEL 4 + +// don't blink halfway up +#ifdef BLINK_AT_RAMP_MIDDLE +#undef BLINK_AT_RAMP_MIDDLE +#endif + +#define RAMP_SMOOTH_FLOOR 10 // low levels may be unreliable +#define RAMP_SMOOTH_CEIL 130 +// 10, 30, [50], 70, 90, 110, 130 +#define RAMP_DISCRETE_FLOOR 10 +#define RAMP_DISCRETE_CEIL RAMP_SMOOTH_CEIL +#define RAMP_DISCRETE_STEPS 7 + +// safe limit ~75% power +#define SIMPLE_UI_FLOOR RAMP_DISCRETE_FLOOR +#define SIMPLE_UI_CEIL RAMP_DISCRETE_CEIL +#define SIMPLE_UI_STEPS 5 + +// make candle mode wobble more +#define CANDLE_AMPLITUDE 30 + +// stop panicking at ~70% power or ~600 lm +#define THERM_FASTER_LEVEL 130 +#define MIN_THERM_STEPDOWN 80 // must be > end of dynamic PWM range + +//#define THERM_RESPONSE_MAGNITUDE 32 // smaller adjustments, this host changes temperature slowly +//#define THERM_NEXT_WARNING_THRESHOLD 32 // more error tolerance before adjusting + +// slow down party strobe; this driver can't pulse for 1ms or less +#define PARTY_STROBE_ONTIME 4 + +#define THERM_CAL_OFFSET 5 + +// the power regulator is a bit slow, so push it harder for a quick response from off +#define DEFAULT_JUMP_START_LEVEL 21 +#define BLINK_BRIGHTNESS DEFAULT_LEVEL +#define BLINK_ONCE_TIME 12 + +// added for convenience +#define USE_SOFT_FACTORY_RESET diff --git a/spaghetti-monster/anduril/cfg-noctigon-dm11-nofet.h b/spaghetti-monster/anduril/cfg-noctigon-dm11-nofet.h new file mode 100644 index 0000000..a1249b1 --- /dev/null +++ b/spaghetti-monster/anduril/cfg-noctigon-dm11-nofet.h @@ -0,0 +1,42 @@ +// Noctigon DM11-noFET config options for Anduril +#include "cfg-noctigon-dm11.h" +#undef MODEL_NUMBER +#define MODEL_NUMBER "0272" +// ATTINY: 1634 + +// turn off the DD FET +#undef PWM_CHANNELS +#define PWM_CHANNELS 1 + +// level_calc.py 5.01 1 149 7135 1 0.3 1740 --pwm dyn:78:16384:255 +#undef PWM1_LEVELS +#define PWM1_LEVELS 0,1,1,1,2,3,3,4,5,6,7,8,9,10,11,13,14,16,17,19,21,23,25,27,29,31,34,36,39,42,44,47,50,53,57,60,63,67,70,74,77,81,85,88,92,96,99,103,107,110,113,117,120,123,126,128,130,133,134,136,137,137,137,137,136,135,133,130,126,122,117,111,104,96,87,76,65,52,38,22,23,25,26,27,28,29,30,32,33,34,36,37,39,40,42,43,45,47,49,51,53,55,57,59,61,63,66,68,70,73,76,78,81,84,87,90,93,96,99,103,106,110,113,117,121,125,129,133,137,142,146,151,155,160,165,170,175,181,186,192,197,203,209,215,222,228,234,241,248,255 +#undef PWM2_LEVELS +#undef PWM_TOPS +#define PWM_TOPS 16383,16383,12404,8140,11462,14700,11041,12947,13795,14111,14124,13946,13641,13248,12791,13418,12808,13057,12385,12428,12358,12209,12000,11746,11459,11147,11158,10793,10708,10576,10173,9998,9800,9585,9527,9278,9023,8901,8634,8486,8216,8053,7881,7615,7440,7261,7009,6832,6656,6422,6196,6031,5819,5615,5419,5190,4973,4803,4571,4386,4179,3955,3745,3549,3340,3145,2940,2729,2513,2312,2109,1903,1697,1491,1286,1070,871,662,459,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255 +#undef DEFAULT_LEVEL +#define DEFAULT_LEVEL 50 +#undef MAX_1x7135 +#define MAX_1x7135 150 + +// make candle mode wobble more +#ifdef CANDLE_AMPLITUDE +#undef CANDLE_AMPLITUDE +#endif +#define CANDLE_AMPLITUDE 35 + + +// slow down party strobe; this driver can't pulse for 1ms or less +// (only needed on no-FET build) +#define PARTY_STROBE_ONTIME 2 + +// jump start a bit higher than base driver +#undef DEFAULT_JUMP_START_LEVEL +#define DEFAULT_JUMP_START_LEVEL 25 + +// stop panicking at ~70% power or ~600 lm +#undef THERM_FASTER_LEVEL +#define THERM_FASTER_LEVEL 130 +#undef MIN_THERM_STEPDOWN +#define MIN_THERM_STEPDOWN 80 // must be > end of dynamic PWM range + diff --git a/spaghetti-monster/anduril/cfg-noctigon-dm11.h b/spaghetti-monster/anduril/cfg-noctigon-dm11.h new file mode 100644 index 0000000..89d2fe6 --- /dev/null +++ b/spaghetti-monster/anduril/cfg-noctigon-dm11.h @@ -0,0 +1,72 @@ +// Noctigon DM11 config options for Anduril +#define MODEL_NUMBER "0271" +#include "hwdef-Noctigon_DM11.h" +#include "hank-cfg.h" +// ATTINY: 1634 + +// this light has three aux LED channels: R, G, B +#define USE_AUX_RGB_LEDS +// ... and a single LED in the button +#define USE_BUTTON_LED +// don't use aux LEDs while main LED is on +#ifdef USE_INDICATOR_LED_WHILE_RAMPING +#undef USE_INDICATOR_LED_WHILE_RAMPING +#endif + + +// power channels: +// - linear: 5A? +// - FET: DD +#define RAMP_LENGTH 150 +#define USE_DYN_PWM +// maxreg at 130, dynamic PWM: level_calc.py 5.01 2 149 7135 1 0.3 1740 FET 1 10 3190 --pwm dyn:64:16384:255 +// (plus one extra level at the beginning for moon) +#define PWM1_LEVELS 0,1,1,2,2,3,4,5,6,7,8,9,11,12,14,16,17,19,22,24,26,29,31,34,37,40,43,46,49,53,56,60,63,67,71,74,78,82,86,89,93,96,99,103,105,108,110,112,114,115,116,116,115,114,112,109,106,101,95,89,81,71,60,48,34,19,20,21,22,23,24,26,27,28,30,31,32,34,36,37,39,41,43,45,47,49,51,53,56,58,61,63,66,69,72,75,78,81,84,88,91,95,99,103,107,111,115,119,124,129,133,138,143,149,154,159,165,171,177,183,189,196,203,210,217,224,231,239,247,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0 +#define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,9,20,30,41,52,63,75,87,99,112,125,138,151,165,179,194,208,224,239,255 +#define PWM_TOPS 16383,16383,11750,14690,9183,12439,13615,13955,13877,13560,13093,12529,13291,12513,12756,12769,11893,11747,12085,11725,11329,11316,10851,10713,10518,10282,10016,9729,9428,9298,8971,8794,8459,8257,8043,7715,7497,7275,7052,6753,6538,6260,5994,5798,5501,5271,5006,4758,4525,4268,4030,3775,3508,3263,3010,2752,2517,2256,1998,1763,1512,1249,994,749,497,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255 + +#define MAX_1x7135 130 +#define DEFAULT_LEVEL 50 +#define HALFSPEED_LEVEL 12 +#define QUARTERSPEED_LEVEL 4 + +// don't blink halfway up +#ifdef BLINK_AT_RAMP_MIDDLE +#undef BLINK_AT_RAMP_MIDDLE +#endif + +#define RAMP_SMOOTH_FLOOR 10 // low levels may be unreliable +#define RAMP_SMOOTH_CEIL 130 +// 10, 30, [50], 70, 90, 110, 130 +#define RAMP_DISCRETE_FLOOR 10 +#define RAMP_DISCRETE_CEIL RAMP_SMOOTH_CEIL +#define RAMP_DISCRETE_STEPS 7 + +// safe limit ~75% power +#define SIMPLE_UI_FLOOR RAMP_DISCRETE_FLOOR +#define SIMPLE_UI_CEIL RAMP_DISCRETE_CEIL +#define SIMPLE_UI_STEPS 5 + +// make candle mode wobble more +#define CANDLE_AMPLITUDE 30 + +// stop panicking at ~70% power or ~600 lm +#define THERM_FASTER_LEVEL 130 +#define MIN_THERM_STEPDOWN 66 // must be > end of dynamic PWM range + +//#define THERM_RESPONSE_MAGNITUDE 32 // smaller adjustments, this host changes temperature slowly +//#define THERM_NEXT_WARNING_THRESHOLD 32 // more error tolerance before adjusting + +// slow down party strobe; this driver can't pulse for 1ms or less +// (only needed on no-FET build) +//#define PARTY_STROBE_ONTIME 2 + +#define THERM_CAL_OFFSET 5 + +// the power regulator is a bit slow, so push it harder for a quick response from off +#define DEFAULT_JUMP_START_LEVEL 21 +#define BLINK_BRIGHTNESS DEFAULT_LEVEL +#define BLINK_ONCE_TIME 12 + +// can't reset the normal way because power is connected before the button +#define USE_SOFT_FACTORY_RESET diff --git a/spaghetti-monster/anduril/cfg-noctigon-md11-12v.h b/spaghetti-monster/anduril/cfg-noctigon-md11-12v.h deleted file mode 100644 index 1c90ab1..0000000 --- a/spaghetti-monster/anduril/cfg-noctigon-md11-12v.h +++ /dev/null @@ -1,70 +0,0 @@ -// Noctigon MD11 (12V) config options for Anduril -#define MODEL_NUMBER "0273" -#include "hwdef-Noctigon_MD11-12V.h" -#include "hank-cfg.h" -// ATTINY: 1634 - -// this light has three aux LED channels: R, G, B -#define USE_AUX_RGB_LEDS -// ... and a single LED in the button -#define USE_BUTTON_LED -// don't use aux LEDs while main LED is on -#ifdef USE_INDICATOR_LED_WHILE_RAMPING -#undef USE_INDICATOR_LED_WHILE_RAMPING -#endif - - -// power channels: -// - linear: 5A? -// - DD FET: none (can't do DD on a boost driver) -#define RAMP_LENGTH 150 -#define USE_DYN_PWM - -// level_calc.py 5.01 1 149 7135 1 0.3 1740 --pwm dyn:78:16384:255 -#define PWM1_LEVELS 0,1,1,1,2,3,3,4,5,6,7,8,9,10,11,13,14,16,17,19,21,23,25,27,29,31,34,36,39,42,44,47,50,53,57,60,63,67,70,74,77,81,85,88,92,96,99,103,107,110,113,117,120,123,126,128,130,133,134,136,137,137,137,137,136,135,133,130,126,122,117,111,104,96,87,76,65,52,38,22,23,25,26,27,28,29,30,32,33,34,36,37,39,40,42,43,45,47,49,51,53,55,57,59,61,63,66,68,70,73,76,78,81,84,87,90,93,96,99,103,106,110,113,117,121,125,129,133,137,142,146,151,155,160,165,170,175,181,186,192,197,203,209,215,222,228,234,241,248,255 -#define PWM_TOPS 16383,16383,12404,8140,11462,14700,11041,12947,13795,14111,14124,13946,13641,13248,12791,13418,12808,13057,12385,12428,12358,12209,12000,11746,11459,11147,11158,10793,10708,10576,10173,9998,9800,9585,9527,9278,9023,8901,8634,8486,8216,8053,7881,7615,7440,7261,7009,6832,6656,6422,6196,6031,5819,5615,5419,5190,4973,4803,4571,4386,4179,3955,3745,3549,3340,3145,2940,2729,2513,2312,2109,1903,1697,1491,1286,1070,871,662,459,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255 -#define DEFAULT_LEVEL 50 -#define MAX_1x7135 150 - -#define HALFSPEED_LEVEL 12 -#define QUARTERSPEED_LEVEL 4 - -// don't blink halfway up -#ifdef BLINK_AT_RAMP_MIDDLE -#undef BLINK_AT_RAMP_MIDDLE -#endif - -#define RAMP_SMOOTH_FLOOR 10 // low levels may be unreliable -#define RAMP_SMOOTH_CEIL 130 -// 10, 30, [50], 70, 90, 110, 130 -#define RAMP_DISCRETE_FLOOR 10 -#define RAMP_DISCRETE_CEIL RAMP_SMOOTH_CEIL -#define RAMP_DISCRETE_STEPS 7 - -// safe limit ~75% power -#define SIMPLE_UI_FLOOR RAMP_DISCRETE_FLOOR -#define SIMPLE_UI_CEIL RAMP_DISCRETE_CEIL -#define SIMPLE_UI_STEPS 5 - -// make candle mode wobble more -#define CANDLE_AMPLITUDE 30 - -// stop panicking at ~70% power or ~600 lm -#define THERM_FASTER_LEVEL 130 -#define MIN_THERM_STEPDOWN 80 // must be > end of dynamic PWM range - -//#define THERM_RESPONSE_MAGNITUDE 32 // smaller adjustments, this host changes temperature slowly -//#define THERM_NEXT_WARNING_THRESHOLD 32 // more error tolerance before adjusting - -// slow down party strobe; this driver can't pulse for 1ms or less -#define PARTY_STROBE_ONTIME 4 - -#define THERM_CAL_OFFSET 5 - -// the power regulator is a bit slow, so push it harder for a quick response from off -#define DEFAULT_JUMP_START_LEVEL 21 -#define BLINK_BRIGHTNESS DEFAULT_LEVEL -#define BLINK_ONCE_TIME 12 - -// added for convenience -#define USE_SOFT_FACTORY_RESET diff --git a/spaghetti-monster/anduril/cfg-noctigon-md11-nofet.h b/spaghetti-monster/anduril/cfg-noctigon-md11-nofet.h deleted file mode 100644 index 0efe85f..0000000 --- a/spaghetti-monster/anduril/cfg-noctigon-md11-nofet.h +++ /dev/null @@ -1,42 +0,0 @@ -// Noctigon MD11-noFET config options for Anduril -#include "cfg-noctigon-md11.h" -#undef MODEL_NUMBER -#define MODEL_NUMBER "0272" -// ATTINY: 1634 - -// turn off the DD FET -#undef PWM_CHANNELS -#define PWM_CHANNELS 1 - -// level_calc.py 5.01 1 149 7135 1 0.3 1740 --pwm dyn:78:16384:255 -#undef PWM1_LEVELS -#define PWM1_LEVELS 0,1,1,1,2,3,3,4,5,6,7,8,9,10,11,13,14,16,17,19,21,23,25,27,29,31,34,36,39,42,44,47,50,53,57,60,63,67,70,74,77,81,85,88,92,96,99,103,107,110,113,117,120,123,126,128,130,133,134,136,137,137,137,137,136,135,133,130,126,122,117,111,104,96,87,76,65,52,38,22,23,25,26,27,28,29,30,32,33,34,36,37,39,40,42,43,45,47,49,51,53,55,57,59,61,63,66,68,70,73,76,78,81,84,87,90,93,96,99,103,106,110,113,117,121,125,129,133,137,142,146,151,155,160,165,170,175,181,186,192,197,203,209,215,222,228,234,241,248,255 -#undef PWM2_LEVELS -#undef PWM_TOPS -#define PWM_TOPS 16383,16383,12404,8140,11462,14700,11041,12947,13795,14111,14124,13946,13641,13248,12791,13418,12808,13057,12385,12428,12358,12209,12000,11746,11459,11147,11158,10793,10708,10576,10173,9998,9800,9585,9527,9278,9023,8901,8634,8486,8216,8053,7881,7615,7440,7261,7009,6832,6656,6422,6196,6031,5819,5615,5419,5190,4973,4803,4571,4386,4179,3955,3745,3549,3340,3145,2940,2729,2513,2312,2109,1903,1697,1491,1286,1070,871,662,459,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255 -#undef DEFAULT_LEVEL -#define DEFAULT_LEVEL 50 -#undef MAX_1x7135 -#define MAX_1x7135 150 - -// make candle mode wobble more -#ifdef CANDLE_AMPLITUDE -#undef CANDLE_AMPLITUDE -#endif -#define CANDLE_AMPLITUDE 35 - - -// slow down party strobe; this driver can't pulse for 1ms or less -// (only needed on no-FET build) -#define PARTY_STROBE_ONTIME 2 - -// jump start a bit higher than base driver -#undef DEFAULT_JUMP_START_LEVEL -#define DEFAULT_JUMP_START_LEVEL 25 - -// stop panicking at ~70% power or ~600 lm -#undef THERM_FASTER_LEVEL -#define THERM_FASTER_LEVEL 130 -#undef MIN_THERM_STEPDOWN -#define MIN_THERM_STEPDOWN 80 // must be > end of dynamic PWM range - diff --git a/spaghetti-monster/anduril/cfg-noctigon-md11.h b/spaghetti-monster/anduril/cfg-noctigon-md11.h deleted file mode 100644 index 130e05c..0000000 --- a/spaghetti-monster/anduril/cfg-noctigon-md11.h +++ /dev/null @@ -1,72 +0,0 @@ -// Noctigon MD11 config options for Anduril -#define MODEL_NUMBER "0271" -#include "hwdef-Noctigon_MD11.h" -#include "hank-cfg.h" -// ATTINY: 1634 - -// this light has three aux LED channels: R, G, B -#define USE_AUX_RGB_LEDS -// ... and a single LED in the button -#define USE_BUTTON_LED -// don't use aux LEDs while main LED is on -#ifdef USE_INDICATOR_LED_WHILE_RAMPING -#undef USE_INDICATOR_LED_WHILE_RAMPING -#endif - - -// power channels: -// - linear: 5A? -// - FET: DD -#define RAMP_LENGTH 150 -#define USE_DYN_PWM -// maxreg at 130, dynamic PWM: level_calc.py 5.01 2 149 7135 1 0.3 1740 FET 1 10 3190 --pwm dyn:64:16384:255 -// (plus one extra level at the beginning for moon) -#define PWM1_LEVELS 0,1,1,2,2,3,4,5,6,7,8,9,11,12,14,16,17,19,22,24,26,29,31,34,37,40,43,46,49,53,56,60,63,67,71,74,78,82,86,89,93,96,99,103,105,108,110,112,114,115,116,116,115,114,112,109,106,101,95,89,81,71,60,48,34,19,20,21,22,23,24,26,27,28,30,31,32,34,36,37,39,41,43,45,47,49,51,53,56,58,61,63,66,69,72,75,78,81,84,88,91,95,99,103,107,111,115,119,124,129,133,138,143,149,154,159,165,171,177,183,189,196,203,210,217,224,231,239,247,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0 -#define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,9,20,30,41,52,63,75,87,99,112,125,138,151,165,179,194,208,224,239,255 -#define PWM_TOPS 16383,16383,11750,14690,9183,12439,13615,13955,13877,13560,13093,12529,13291,12513,12756,12769,11893,11747,12085,11725,11329,11316,10851,10713,10518,10282,10016,9729,9428,9298,8971,8794,8459,8257,8043,7715,7497,7275,7052,6753,6538,6260,5994,5798,5501,5271,5006,4758,4525,4268,4030,3775,3508,3263,3010,2752,2517,2256,1998,1763,1512,1249,994,749,497,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255 - -#define MAX_1x7135 130 -#define DEFAULT_LEVEL 50 -#define HALFSPEED_LEVEL 12 -#define QUARTERSPEED_LEVEL 4 - -// don't blink halfway up -#ifdef BLINK_AT_RAMP_MIDDLE -#undef BLINK_AT_RAMP_MIDDLE -#endif - -#define RAMP_SMOOTH_FLOOR 10 // low levels may be unreliable -#define RAMP_SMOOTH_CEIL 130 -// 10, 30, [50], 70, 90, 110, 130 -#define RAMP_DISCRETE_FLOOR 10 -#define RAMP_DISCRETE_CEIL RAMP_SMOOTH_CEIL -#define RAMP_DISCRETE_STEPS 7 - -// safe limit ~75% power -#define SIMPLE_UI_FLOOR RAMP_DISCRETE_FLOOR -#define SIMPLE_UI_CEIL RAMP_DISCRETE_CEIL -#define SIMPLE_UI_STEPS 5 - -// make candle mode wobble more -#define CANDLE_AMPLITUDE 30 - -// stop panicking at ~70% power or ~600 lm -#define THERM_FASTER_LEVEL 130 -#define MIN_THERM_STEPDOWN 66 // must be > end of dynamic PWM range - -//#define THERM_RESPONSE_MAGNITUDE 32 // smaller adjustments, this host changes temperature slowly -//#define THERM_NEXT_WARNING_THRESHOLD 32 // more error tolerance before adjusting - -// slow down party strobe; this driver can't pulse for 1ms or less -// (only needed on no-FET build) -//#define PARTY_STROBE_ONTIME 2 - -#define THERM_CAL_OFFSET 5 - -// the power regulator is a bit slow, so push it harder for a quick response from off -#define DEFAULT_JUMP_START_LEVEL 21 -#define BLINK_BRIGHTNESS DEFAULT_LEVEL -#define BLINK_ONCE_TIME 12 - -// can't reset the normal way because power is connected before the button -#define USE_SOFT_FACTORY_RESET -- cgit v1.2.3 From 817462cc70188af8d3c07c1006d79d54e3882c42 Mon Sep 17 00:00:00 2001 From: Selene ToyKeeper Date: Fri, 12 Nov 2021 03:13:10 -0700 Subject: fine-tuned DM11-12V build a bit based on actual measurements --- spaghetti-monster/anduril/cfg-noctigon-dm11-12v.h | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) (limited to 'spaghetti-monster') diff --git a/spaghetti-monster/anduril/cfg-noctigon-dm11-12v.h b/spaghetti-monster/anduril/cfg-noctigon-dm11-12v.h index 27af461..03961e0 100644 --- a/spaghetti-monster/anduril/cfg-noctigon-dm11-12v.h +++ b/spaghetti-monster/anduril/cfg-noctigon-dm11-12v.h @@ -21,9 +21,10 @@ #define USE_DYN_PWM // level_calc.py 5.01 1 149 7135 1 0.3 1740 --pwm dyn:78:16384:255 +// (plus a 0 at the beginning for moon) #define PWM1_LEVELS 0,1,1,1,2,3,3,4,5,6,7,8,9,10,11,13,14,16,17,19,21,23,25,27,29,31,34,36,39,42,44,47,50,53,57,60,63,67,70,74,77,81,85,88,92,96,99,103,107,110,113,117,120,123,126,128,130,133,134,136,137,137,137,137,136,135,133,130,126,122,117,111,104,96,87,76,65,52,38,22,23,25,26,27,28,29,30,32,33,34,36,37,39,40,42,43,45,47,49,51,53,55,57,59,61,63,66,68,70,73,76,78,81,84,87,90,93,96,99,103,106,110,113,117,121,125,129,133,137,142,146,151,155,160,165,170,175,181,186,192,197,203,209,215,222,228,234,241,248,255 #define PWM_TOPS 16383,16383,12404,8140,11462,14700,11041,12947,13795,14111,14124,13946,13641,13248,12791,13418,12808,13057,12385,12428,12358,12209,12000,11746,11459,11147,11158,10793,10708,10576,10173,9998,9800,9585,9527,9278,9023,8901,8634,8486,8216,8053,7881,7615,7440,7261,7009,6832,6656,6422,6196,6031,5819,5615,5419,5190,4973,4803,4571,4386,4179,3955,3745,3549,3340,3145,2940,2729,2513,2312,2109,1903,1697,1491,1286,1070,871,662,459,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255 -#define DEFAULT_LEVEL 50 +#define DEFAULT_LEVEL 70 #define MAX_1x7135 150 #define HALFSPEED_LEVEL 12 @@ -36,7 +37,8 @@ #define RAMP_SMOOTH_FLOOR 10 // low levels may be unreliable #define RAMP_SMOOTH_CEIL 130 -// 10, 30, [50], 70, 90, 110, 130 +// 10, 30, 50, [70], 90, 110, 130 +// Nichia B35 model: (0.56), 1.4, 8.4, 34.5, [102], 250, 500, 860, (1300) lm #define RAMP_DISCRETE_FLOOR 10 #define RAMP_DISCRETE_CEIL RAMP_SMOOTH_CEIL #define RAMP_DISCRETE_STEPS 7 @@ -56,14 +58,16 @@ //#define THERM_RESPONSE_MAGNITUDE 32 // smaller adjustments, this host changes temperature slowly //#define THERM_NEXT_WARNING_THRESHOLD 32 // more error tolerance before adjusting -// slow down party strobe; this driver can't pulse for 1ms or less -#define PARTY_STROBE_ONTIME 4 +// slow down party strobe; this driver can't pulse for 2ms or less +#define PARTY_STROBE_ONTIME 3 #define THERM_CAL_OFFSET 5 -// the power regulator is a bit slow, so push it harder for a quick response from off -#define DEFAULT_JUMP_START_LEVEL 21 -#define BLINK_BRIGHTNESS DEFAULT_LEVEL +// the power regulator seems to "jump start" the LEDs all on its own, +// so the firmware doesn't have to +// (and unfortunately the power regulator jumps it a bit too hard) +#define DEFAULT_JUMP_START_LEVEL 1 +#define BLINK_BRIGHTNESS 50 #define BLINK_ONCE_TIME 12 // added for convenience -- cgit v1.2.3 From 13dd432134110138106ea2bf3b5605cd37e23ebc Mon Sep 17 00:00:00 2001 From: Selene ToyKeeper Date: Fri, 12 Nov 2021 03:16:00 -0700 Subject: added DM11 to MODELS file --- spaghetti-monster/anduril/MODELS | 3 +++ 1 file changed, 3 insertions(+) (limited to 'spaghetti-monster') diff --git a/spaghetti-monster/anduril/MODELS b/spaghetti-monster/anduril/MODELS index a125f53..79a6a4a 100644 --- a/spaghetti-monster/anduril/MODELS +++ b/spaghetti-monster/anduril/MODELS @@ -30,6 +30,9 @@ Model Name MCU 0265 noctigon-k9.3-tintramp-nofet attiny1634 0266 noctigon-k9.3-tintramp-fet attiny1634 0267 noctigon-k9.3-tintramp-219 attiny1634 +0271 noctigon-dm11 attiny1634 +0272 noctigon-dm11-nofet attiny1634 +0273 noctigon-dm11-12v attiny1634 0311 fw3a attiny85 0312 fw3a-219 attiny85 0313 fw3a-nofet attiny85 -- cgit v1.2.3 From 6a6d9e59cd950b07112c9801933461162e43e1cb Mon Sep 17 00:00:00 2001 From: Selene ToyKeeper Date: Fri, 12 Nov 2021 03:26:20 -0700 Subject: a bit more fine-tuning for DM11 --- spaghetti-monster/anduril/cfg-noctigon-dm11-12v.h | 4 ++-- spaghetti-monster/anduril/cfg-noctigon-dm11-nofet.h | 4 ++-- spaghetti-monster/anduril/cfg-noctigon-dm11.h | 9 +++++---- 3 files changed, 9 insertions(+), 8 deletions(-) (limited to 'spaghetti-monster') diff --git a/spaghetti-monster/anduril/cfg-noctigon-dm11-12v.h b/spaghetti-monster/anduril/cfg-noctigon-dm11-12v.h index 03961e0..3e7c1d3 100644 --- a/spaghetti-monster/anduril/cfg-noctigon-dm11-12v.h +++ b/spaghetti-monster/anduril/cfg-noctigon-dm11-12v.h @@ -24,9 +24,9 @@ // (plus a 0 at the beginning for moon) #define PWM1_LEVELS 0,1,1,1,2,3,3,4,5,6,7,8,9,10,11,13,14,16,17,19,21,23,25,27,29,31,34,36,39,42,44,47,50,53,57,60,63,67,70,74,77,81,85,88,92,96,99,103,107,110,113,117,120,123,126,128,130,133,134,136,137,137,137,137,136,135,133,130,126,122,117,111,104,96,87,76,65,52,38,22,23,25,26,27,28,29,30,32,33,34,36,37,39,40,42,43,45,47,49,51,53,55,57,59,61,63,66,68,70,73,76,78,81,84,87,90,93,96,99,103,106,110,113,117,121,125,129,133,137,142,146,151,155,160,165,170,175,181,186,192,197,203,209,215,222,228,234,241,248,255 #define PWM_TOPS 16383,16383,12404,8140,11462,14700,11041,12947,13795,14111,14124,13946,13641,13248,12791,13418,12808,13057,12385,12428,12358,12209,12000,11746,11459,11147,11158,10793,10708,10576,10173,9998,9800,9585,9527,9278,9023,8901,8634,8486,8216,8053,7881,7615,7440,7261,7009,6832,6656,6422,6196,6031,5819,5615,5419,5190,4973,4803,4571,4386,4179,3955,3745,3549,3340,3145,2940,2729,2513,2312,2109,1903,1697,1491,1286,1070,871,662,459,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255 + #define DEFAULT_LEVEL 70 #define MAX_1x7135 150 - #define HALFSPEED_LEVEL 12 #define QUARTERSPEED_LEVEL 4 @@ -49,7 +49,7 @@ #define SIMPLE_UI_STEPS 5 // make candle mode wobble more -#define CANDLE_AMPLITUDE 30 +#define CANDLE_AMPLITUDE 33 // stop panicking at ~70% power or ~600 lm #define THERM_FASTER_LEVEL 130 diff --git a/spaghetti-monster/anduril/cfg-noctigon-dm11-nofet.h b/spaghetti-monster/anduril/cfg-noctigon-dm11-nofet.h index a1249b1..5a828d6 100644 --- a/spaghetti-monster/anduril/cfg-noctigon-dm11-nofet.h +++ b/spaghetti-monster/anduril/cfg-noctigon-dm11-nofet.h @@ -15,7 +15,7 @@ #undef PWM_TOPS #define PWM_TOPS 16383,16383,12404,8140,11462,14700,11041,12947,13795,14111,14124,13946,13641,13248,12791,13418,12808,13057,12385,12428,12358,12209,12000,11746,11459,11147,11158,10793,10708,10576,10173,9998,9800,9585,9527,9278,9023,8901,8634,8486,8216,8053,7881,7615,7440,7261,7009,6832,6656,6422,6196,6031,5819,5615,5419,5190,4973,4803,4571,4386,4179,3955,3745,3549,3340,3145,2940,2729,2513,2312,2109,1903,1697,1491,1286,1070,871,662,459,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255 #undef DEFAULT_LEVEL -#define DEFAULT_LEVEL 50 +#define DEFAULT_LEVEL 70 #undef MAX_1x7135 #define MAX_1x7135 150 @@ -23,7 +23,7 @@ #ifdef CANDLE_AMPLITUDE #undef CANDLE_AMPLITUDE #endif -#define CANDLE_AMPLITUDE 35 +#define CANDLE_AMPLITUDE 33 // slow down party strobe; this driver can't pulse for 1ms or less diff --git a/spaghetti-monster/anduril/cfg-noctigon-dm11.h b/spaghetti-monster/anduril/cfg-noctigon-dm11.h index 89d2fe6..794ae2b 100644 --- a/spaghetti-monster/anduril/cfg-noctigon-dm11.h +++ b/spaghetti-monster/anduril/cfg-noctigon-dm11.h @@ -19,14 +19,15 @@ // - FET: DD #define RAMP_LENGTH 150 #define USE_DYN_PWM + // maxreg at 130, dynamic PWM: level_calc.py 5.01 2 149 7135 1 0.3 1740 FET 1 10 3190 --pwm dyn:64:16384:255 // (plus one extra level at the beginning for moon) #define PWM1_LEVELS 0,1,1,2,2,3,4,5,6,7,8,9,11,12,14,16,17,19,22,24,26,29,31,34,37,40,43,46,49,53,56,60,63,67,71,74,78,82,86,89,93,96,99,103,105,108,110,112,114,115,116,116,115,114,112,109,106,101,95,89,81,71,60,48,34,19,20,21,22,23,24,26,27,28,30,31,32,34,36,37,39,41,43,45,47,49,51,53,56,58,61,63,66,69,72,75,78,81,84,88,91,95,99,103,107,111,115,119,124,129,133,138,143,149,154,159,165,171,177,183,189,196,203,210,217,224,231,239,247,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0 #define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,9,20,30,41,52,63,75,87,99,112,125,138,151,165,179,194,208,224,239,255 #define PWM_TOPS 16383,16383,11750,14690,9183,12439,13615,13955,13877,13560,13093,12529,13291,12513,12756,12769,11893,11747,12085,11725,11329,11316,10851,10713,10518,10282,10016,9729,9428,9298,8971,8794,8459,8257,8043,7715,7497,7275,7052,6753,6538,6260,5994,5798,5501,5271,5006,4758,4525,4268,4030,3775,3508,3263,3010,2752,2517,2256,1998,1763,1512,1249,994,749,497,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255 +#define DEFAULT_LEVEL 70 #define MAX_1x7135 130 -#define DEFAULT_LEVEL 50 #define HALFSPEED_LEVEL 12 #define QUARTERSPEED_LEVEL 4 @@ -37,7 +38,7 @@ #define RAMP_SMOOTH_FLOOR 10 // low levels may be unreliable #define RAMP_SMOOTH_CEIL 130 -// 10, 30, [50], 70, 90, 110, 130 +// 10, 30, 50, [70], 90, 110, 130 #define RAMP_DISCRETE_FLOOR 10 #define RAMP_DISCRETE_CEIL RAMP_SMOOTH_CEIL #define RAMP_DISCRETE_STEPS 7 @@ -65,8 +66,8 @@ // the power regulator is a bit slow, so push it harder for a quick response from off #define DEFAULT_JUMP_START_LEVEL 21 -#define BLINK_BRIGHTNESS DEFAULT_LEVEL +#define BLINK_BRIGHTNESS 50 #define BLINK_ONCE_TIME 12 -// can't reset the normal way because power is connected before the button +// added for convenience #define USE_SOFT_FACTORY_RESET -- cgit v1.2.3