From 7ded443ac8f807726a68df5596132f30059e5033 Mon Sep 17 00:00:00 2001 From: Selene ToyKeeper Date: Sat, 19 Aug 2023 10:53:49 -0600 Subject: newer TS10 ramp, more low modes (max 7135 at ramp 90/150 like SammysHP's ramp) --- spaghetti-monster/anduril/cfg-wurkkos-ts10-rgb.h | 62 ++++++++++++++++++++---- spaghetti-monster/anduril/cfg-wurkkos-ts10.h | 35 ++++++------- 2 files changed, 68 insertions(+), 29 deletions(-) (limited to 'spaghetti-monster') diff --git a/spaghetti-monster/anduril/cfg-wurkkos-ts10-rgb.h b/spaghetti-monster/anduril/cfg-wurkkos-ts10-rgb.h index c3764fa..b307491 100644 --- a/spaghetti-monster/anduril/cfg-wurkkos-ts10-rgb.h +++ b/spaghetti-monster/anduril/cfg-wurkkos-ts10-rgb.h @@ -11,29 +11,71 @@ ///// apply some config from the TS10 ///// -// blink numbers on the aux LEDs by default -#undef DEFAULT_BLINK_CHANNEL -#define DEFAULT_BLINK_CHANNEL CM_AUXWHT - // use the TS10 ramp, not the TS25 ramp #undef PWM1_LEVELS #undef PWM2_LEVELS #undef PWM_TOPS -#define PWM1_LEVELS 1,1,2,2,5,6,6,7,8,9,9,10,11,11,12,13,14,14,15,15,19,19,19,19,20,21,21,22,23,24,24,25,25,26,27,28,29,30,32,33,35,36,38,39,41,44,46,49,52,55,59,63,67,70,75,80,85,91,97,105,112,119,127,135,143,152,161,171,181,192,204,216,228,241,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0 -#define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,4,5,7,9,11,13,15,17,19,21,23,25,27,29,32,34,36,39,41,43,46,49,51,54,57,59,62,65,68,71,74,77,80,83,86,90,93,96,100,103,107,110,114,117,121,125,129,133,137,141,145,149,153,157,162,166,170,175,179,184,189,193,198,203,208,213,218,223,228,233,239,244,249,255 -#define PWM_TOPS 4095,2659,3154,1866,2864,2707,2113,2243,2256,2210,1846,1841,1853,1596,1591,1595,1592,1405,1395,1284,1000,903,807,711,707,693,622,593,565,537,486,464,441,420,400,380,362,344,339,322,316,300,293,286,278,277,269,266,263,259,259,258,256,253,253,252,251,251,251,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255 +#undef MAX_1x7135 +#undef MIN_THERM_STEPDOWN +#undef HALFSPEED_LEVEL +#undef QUARTERSPEED_LEVEL +#undef DEFAULT_LEVEL +#undef RAMP_SMOOTH_FLOOR +#undef RAMP_SMOOTH_CEIL +#undef RAMP_DISCRETE_FLOOR +#undef RAMP_DISCRETE_CEIL +#undef RAMP_DISCRETE_STEPS +#undef SIMPLE_UI_FLOOR +#undef SIMPLE_UI_CEIL +#undef SIMPLE_UI_STEPS +#undef THERM_FASTER_LEVEL + +// 7135 at 90/150 +// level_calc.py 5.7895 2 150 7135 0 0.1 125.25 FET 1 10 1200 --pwm dyn:61:4096:255:2.5 --clock 5:11:2.0 +// (with heavy manual tweaks up to ~15/150) +#define PWM1_LEVELS 1, 1, 2, 2, 3, 3, 4, 5, 6, 6, 8, 9, 9, 10, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 19, 20, 21, 22, 23, 23, 24, 25, 26, 26, 27, 27, 28, 28, 29, 29, 30, 30, 31, 31, 32, 32, 33, 33, 34, 35, 36, 37, 38, 40, 41, 43, 45, 47, 50, 53, 56, 60, 63, 67, 71, 75, 79, 84, 89, 94, 99,104,110,116,122,129,136,143,150,158,166,174,183,192,202,211,222,232,243,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0 +#define PWM2_LEVELS 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2, 3, 5, 7, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 29, 31, 34, 37, 39, 42, 45, 48, 51, 54, 58, 61, 65, 68, 72, 76, 80, 84, 88, 93, 97,102,107,112,117,122,127,133,139,145,151,157,163,170,177,183,191,198,205,213,221,229,238,246,255 +#define PWM_TOPS 4095,2893,3917,2806,3252,2703,2684,2660,2640,2370,3000,2900,2630,2549,2246,2193,2030,1961,1889,1716,1642,1569,1497,1428,1290,1232,1176,1122,1070,976,932,890,849,779,745,685,656,605,579,536,514,476,457,424,407,379,364,340,327,314,302,291,280,276,266,262,257,253,253,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255 +#define MAX_1x7135 90 +#define MIN_THERM_STEPDOWN 60 +#define HALFSPEED_LEVEL 11 +#define QUARTERSPEED_LEVEL 5 +#define DEFAULT_LEVEL 50 + +#define RAMP_SMOOTH_FLOOR 1 +#define RAMP_SMOOTH_CEIL 150 +// 20 38 56 [75] 93 111 130 +// 10 30 50 70 [90] 110 130 +#define RAMP_DISCRETE_FLOOR 10 +#define RAMP_DISCRETE_CEIL 130 +#define RAMP_DISCRETE_STEPS 7 // at Wurkkos's request, reduce the Simple UI ceiling a little bit // (i.e. not 150; original config had it at 144/150, or DD FET 204/255) // 20 47 [75] 102 130 -#undef SIMPLE_UI_FLOOR -#undef SIMPLE_UI_CEIL -#define SIMPLE_UI_FLOOR 20 +// 10 30 50 70 [90] 110 130 +#define SIMPLE_UI_FLOOR 10 #define SIMPLE_UI_CEIL 130 +#define SIMPLE_UI_STEPS 7 + +// stop panicking at ~50% power +#define THERM_FASTER_LEVEL 130 // throttle back faster when high + +// show each channel while it scroll by in the menu +#define USE_CONFIG_COLORS + +// blink numbers on the aux LEDs by default +#undef DEFAULT_BLINK_CHANNEL +#define DEFAULT_BLINK_CHANNEL CM_AUXWHT // the default of 26 looks a bit rough, so increase it to make it smoother #define CANDLE_AMPLITUDE 33 +// don't blink mid-ramp +#ifdef BLINK_AT_RAMP_MIDDLE +#undef BLINK_AT_RAMP_MIDDLE +#endif + // enable factory reset on 13H without loosening tailcap (required) #define USE_SOFT_FACTORY_RESET diff --git a/spaghetti-monster/anduril/cfg-wurkkos-ts10.h b/spaghetti-monster/anduril/cfg-wurkkos-ts10.h index 506e2b9..0819e42 100644 --- a/spaghetti-monster/anduril/cfg-wurkkos-ts10.h +++ b/spaghetti-monster/anduril/cfg-wurkkos-ts10.h @@ -26,7 +26,7 @@ #define RAMP_SIZE 150 -#if 0 // 2022 version by SammysHP, smoother and lower but only level 1/150 is underclocked +#if 0 // 2022 version by SammysHP, smooth but only level 1/150 is underclocked // level 1 by hand, for the rest // level_calc.py 7.01 2 149 7135 3 0.5 125 FET 1 10 1200 --pwm dyn:63:2048:255 #define PWM1_LEVELS 1,3,3,4,5,6,7,8,9,10,12,13,14,16,17,19,20,22,24,25,27,29,31,33,35,37,40,42,44,47,49,52,54,57,59,62,64,67,70,72,75,77,80,82,85,87,89,91,93,95,96,98,99,100,100,101,100,100,99,97,95,93,90,86,82,87,91,96,100,106,111,116,122,128,134,141,147,155,162,169,177,186,194,203,213,222,232,243,254,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0 @@ -37,37 +37,34 @@ #define QUARTERSPEED_LEVEL 2 #endif -// 7135 at 75/150 -// level_calc.py 5.7895 2 150 7135 -1 0.1 130 FET 1 10 3000 --pwm dyn:72:4096:255:5 --clock 5:21:8.0 -// (with heavy manual tweaks around the clock change points) -// non-zero part of FET channel calculated with: -// level_calc.py 3 1 75 7135 2 500 3000 -#define PWM1_LEVELS 1,1,2,2,5,6,6,7,8,9,9,10,11,11,12,13,14,14,15,15,19,19,19,19,20,21,21,22,23,24,24,25,25,26,27,28,29,30,32,33,35,36,38,39,41,44,46,49,52,55,59,63,67,70,75,80,85,91,97,105,112,119,127,135,143,152,161,171,181,192,204,216,228,241,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0 -#define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,4,5,7,9,11,13,15,17,19,21,23,25,27,29,32,34,36,39,41,43,46,49,51,54,57,59,62,65,68,71,74,77,80,83,86,90,93,96,100,103,107,110,114,117,121,125,129,133,137,141,145,149,153,157,162,166,170,175,179,184,189,193,198,203,208,213,218,223,228,233,239,244,249,255 -#define PWM_TOPS 4095,2659,3154,1866,2864,2707,2113,2243,2256,2210,1846,1841,1853,1596,1591,1595,1592,1405,1395,1284,1000,903,807,711,707,693,622,593,565,537,486,464,441,420,400,380,362,344,339,322,316,300,293,286,278,277,269,266,263,259,259,258,256,253,253,252,251,251,251,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255 - -#define MAX_1x7135 75 -#define DEFAULT_LEVEL 50 +// 7135 at 90/150 +// level_calc.py 5.7895 2 150 7135 0 0.1 125.25 FET 1 10 1200 --pwm dyn:61:4096:255:2.5 --clock 5:11:2.0 +// (with heavy manual tweaks up to ~15/150) +#define PWM1_LEVELS 1, 1, 2, 2, 3, 3, 4, 5, 6, 6, 8, 9, 9, 10, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 19, 20, 21, 22, 23, 23, 24, 25, 26, 26, 27, 27, 28, 28, 29, 29, 30, 30, 31, 31, 32, 32, 33, 33, 34, 35, 36, 37, 38, 40, 41, 43, 45, 47, 50, 53, 56, 60, 63, 67, 71, 75, 79, 84, 89, 94, 99,104,110,116,122,129,136,143,150,158,166,174,183,192,202,211,222,232,243,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0 +#define PWM2_LEVELS 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2, 3, 5, 7, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 29, 31, 34, 37, 39, 42, 45, 48, 51, 54, 58, 61, 65, 68, 72, 76, 80, 84, 88, 93, 97,102,107,112,117,122,127,133,139,145,151,157,163,170,177,183,191,198,205,213,221,229,238,246,255 +#define PWM_TOPS 4095,2893,3917,2806,3252,2703,2684,2660,2640,2370,3000,2900,2630,2549,2246,2193,2030,1961,1889,1716,1642,1569,1497,1428,1290,1232,1176,1122,1070,976,932,890,849,779,745,685,656,605,579,536,514,476,457,424,407,379,364,340,327,314,302,291,280,276,266,262,257,253,253,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255 +#define MAX_1x7135 90 #define MIN_THERM_STEPDOWN 60 -#define HALFSPEED_LEVEL 21 +#define HALFSPEED_LEVEL 11 #define QUARTERSPEED_LEVEL 5 +#define DEFAULT_LEVEL 50 #define RAMP_SMOOTH_FLOOR 1 #define RAMP_SMOOTH_CEIL 150 -// 20 38 56 [75] 93 111 130 -#define RAMP_DISCRETE_FLOOR 20 +// 10 30 50 70 [90] 110 130 +#define RAMP_DISCRETE_FLOOR 10 #define RAMP_DISCRETE_CEIL 130 #define RAMP_DISCRETE_STEPS 7 // at Wurkkos's request, reduce the Simple UI ceiling a little bit // (i.e. not 150; original config had it at 144/150, or DD FET 204/255) -// 20 47 [75] 102 130 -#define SIMPLE_UI_FLOOR 20 +// 10 30 50 70 [90] 110 130 +#define SIMPLE_UI_FLOOR 10 #define SIMPLE_UI_CEIL 130 -#define SIMPLE_UI_STEPS 5 +#define SIMPLE_UI_STEPS 7 // stop panicking at ~50% power -#define THERM_FASTER_LEVEL 120 // throttle back faster when high +#define THERM_FASTER_LEVEL 130 // throttle back faster when high // show each channel while it scroll by in the menu #define USE_CONFIG_COLORS -- cgit v1.2.3