From 90d4d514851192f74819a141b81cf515089209c7 Mon Sep 17 00:00:00 2001
From: Selene ToyKeeper
Date: Thu, 13 Sep 2018 04:02:40 -0600
Subject: oops, forgot to add lantern config file

---
 spaghetti-monster/anduril/cfg-blf-lantern.h | 59 +++++++++++++++++++++++++++++
 1 file changed, 59 insertions(+)
 create mode 100644 spaghetti-monster/anduril/cfg-blf-lantern.h

(limited to 'spaghetti-monster')

diff --git a/spaghetti-monster/anduril/cfg-blf-lantern.h b/spaghetti-monster/anduril/cfg-blf-lantern.h
new file mode 100644
index 0000000..05b89ca
--- /dev/null
+++ b/spaghetti-monster/anduril/cfg-blf-lantern.h
@@ -0,0 +1,59 @@
+// BLF Lantern config options for Anduril
+
+// basically the same as a Q8...  sort of
+#define FSM_BLF_Q8_DRIVER
+
+// the button lights up
+#define USE_INDICATOR_LED
+// the button is visible while main LEDs are on
+#define USE_INDICATOR_LED_WHILE_RAMPING
+// enable blinking indicator LED while off
+#define TICK_DURING_STANDBY
+
+// the lantern has two PWM channels, but they drive different sets of emitters
+// (one channel for warm emitters, one channel for cold)
+// so enable a special ramping mode which changes tint instead of brightness
+#define USE_TINT_RAMPING
+
+#ifdef RAMP_LENGTH
+#undef RAMP_LENGTH
+#endif
+
+// level_calc.py 1 150 7135 1 30 800
+#define RAMP_LENGTH 150
+#define PWM1_LEVELS 1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,11,11,12,13,13,14,15,15,16,17,18,18,19,20,21,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,43,44,45,46,48,49,50,51,53,54,56,57,58,60,61,63,64,66,67,69,70,72,74,75,77,79,80,82,84,85,87,89,91,93,95,97,98,100,102,104,106,108,111,113,115,117,119,121,124,126,128,130,133,135,137,140,142,145,147,150,152,155,157,160,163,165,168,171,173,176,179,182,185,188,190,193,196,199,202,205,209,212,215,218,221,224,228,231,234,238,241,245,248,251,255
+#define MAX_1x7135 65
+#define HALFSPEED_LEVEL 14
+#define QUARTERSPEED_LEVEL 5
+
+// set floor and ceiling as far apart as possible
+// because this lantern isn't overpowered
+#define RAMP_SMOOTH_FLOOR 1
+#define RAMP_SMOOTH_CEILING 150
+#define RAMP_DISCRETE_FLOOR RAMP_SMOOTH_FLOOR
+#define RAMP_DISCRETE_CEILING RAMP_SMOOTH_CEILING
+
+// the sensor (attiny85) is nowhere near the emitters
+// so thermal regulation can't work
+#ifdef USE_THERMAL_REGULATION
+#undef USE_THERMAL_REGULATION
+#endif
+
+// also, the set_level_gradually() thing isn't compatible with tint ramping
+// (but unsetting it here doesn't actually do anything, because the thermal
+//  regulation define enables it later...  so this is mostly just a note to
+//  make this compatibility issue explicit)
+#ifdef USE_SET_LEVEL_GRADUALLY
+#undef USE_SET_LEVEL_GRADUALLY
+#endif
+
+// don't blink while ramping
+#ifdef BLINK_AT_CHANNEL_BOUNDARIES
+#undef BLINK_AT_CHANNEL_BOUNDARIES
+#endif
+#ifdef BLINK_AT_RAMP_CEILING
+#undef BLINK_AT_RAMP_CEILING
+#endif
+#ifdef BLINK_AT_RAMP_FLOOR
+#undef BLINK_AT_RAMP_FLOOR
+#endif
-- 
cgit v1.2.3