From 268b2deacc7b65c7d9d2805d1e504cf94f5734ac Mon Sep 17 00:00:00 2001
From: Selene ToyKeeper
Date: Fri, 12 Oct 2018 16:16:02 -0600
Subject: Moved "off" mode's aux LED to config to "7 clicks from off".

---
 spaghetti-monster/anduril/anduril.c | 33 ++++++++++++++++++++++++++++++---
 1 file changed, 30 insertions(+), 3 deletions(-)

(limited to 'spaghetti-monster')

diff --git a/spaghetti-monster/anduril/anduril.c b/spaghetti-monster/anduril/anduril.c
index 6e33610..300e32b 100644
--- a/spaghetti-monster/anduril/anduril.c
+++ b/spaghetti-monster/anduril/anduril.c
@@ -139,13 +139,20 @@
 #define RAMP_LENGTH 150  // default, if not overridden in a driver cfg file
 #define MAX_BIKING_LEVEL 120  // should be 127 or less
 #define USE_BATTCHECK
-#ifdef USE_MUGGLE_MODE
+
+// determine the highest number of clicks to handle
+#ifdef USE_INDICATOR_LED
+#define MAX_CLICKS 7
+#elif defined(USE_MUGGLE_MODE)
 #define MAX_CLICKS 6
-#define MUGGLE_FLOOR 22
-#define MUGGLE_CEILING (MAX_1x7135+20)
 #else
 #define MAX_CLICKS 5
 #endif
+
+#if defined(USE_MUGGLE_MODE)
+#define MUGGLE_FLOOR 22
+#define MUGGLE_CEILING (MAX_1x7135+20)
+#endif
 #define USE_IDLE_MODE  // reduce power use while awake and no tasks are pending
 #define USE_DYNAMIC_UNDERCLOCKING  // cut clock speed at very low modes for better efficiency
 
@@ -488,6 +495,24 @@ uint8_t off_state(EventPtr event, uint16_t arg) {
         return MISCHIEF_MANAGED;
     }
     #endif
+    #ifdef USE_INDICATOR_LED
+    // 7 clicks: change indicator LED mode
+    else if (event == EV_7clicks) {
+        uint8_t mode = (indicator_led_mode & 3) + 1;
+        #ifdef TICK_DURING_STANDBY
+        mode = mode & 3;
+        #else
+        mode = mode % 3;
+        #endif
+        #ifdef INDICATOR_LED_SKIP_LOW
+        if (mode == 1) { mode ++; }
+        #endif
+        indicator_led_mode = (indicator_led_mode & 0b11111100) | mode;
+        indicator_led(mode);
+        save_config();
+        return MISCHIEF_MANAGED;
+    }
+    #endif
     return EVENT_NOT_HANDLED;
 }
 
@@ -1198,6 +1223,7 @@ uint8_t lockout_state(EventPtr event, uint16_t arg) {
         save_config();
         return MISCHIEF_MANAGED;
     }
+    #if 0  // old method, deprecated in favor of "7 clicks from off"
     // click, click, hold: rotate through indicator LED modes (off mode)
     else if (event == EV_click3_hold) {
         #ifndef USE_INDICATOR_LED_WHILE_RAMPING
@@ -1230,6 +1256,7 @@ uint8_t lockout_state(EventPtr event, uint16_t arg) {
         return MISCHIEF_MANAGED;
     }
     #endif
+    #endif
     // 4 clicks: exit
     else if (event == EV_4clicks) {
         blink_confirm(1);
-- 
cgit v1.2.3


From 565fb109ec5e7cf195914834523b1723da374e40 Mon Sep 17 00:00:00 2001
From: Selene ToyKeeper
Date: Mon, 15 Oct 2018 15:08:17 -0600
Subject: cleaned up fsm baton UI a little, added a short manual

---
 spaghetti-monster/baton/baton-simpler.c |  40 +++++-------
 spaghetti-monster/baton/baton.c         | 112 ++++++++++++++++++--------------
 spaghetti-monster/baton/baton.txt       |  21 ++++++
 3 files changed, 103 insertions(+), 70 deletions(-)
 create mode 100644 spaghetti-monster/baton/baton.txt

(limited to 'spaghetti-monster')

diff --git a/spaghetti-monster/baton/baton-simpler.c b/spaghetti-monster/baton/baton-simpler.c
index 96b0ea7..d4725ef 100644
--- a/spaghetti-monster/baton/baton-simpler.c
+++ b/spaghetti-monster/baton/baton-simpler.c
@@ -20,7 +20,6 @@
 #define FSM_EMISAR_D4_DRIVER
 #define USE_LVP
 #define USE_THERMAL_REGULATION
-#define DEFAULT_THERM_CEIL 45
 #define USE_DELAY_MS
 #include "spaghetti-monster.h"
 
@@ -59,6 +58,11 @@ uint8_t off_state(EventPtr event, uint16_t arg) {
         set_level(0);
         return EVENT_HANDLED;
     }
+    // hold (longer): go to lowest level
+    else if (event == EV_click1_hold) {
+        set_state(steady_state, 0);
+        return EVENT_HANDLED;
+    }
     // 1 click (before timeout): go to memorized level, but allow abort for double click
     else if (event == EV_click1_release) {
         set_level(memorized_level);
@@ -79,11 +83,6 @@ uint8_t off_state(EventPtr event, uint16_t arg) {
         set_state(lockout_state, 0);
         return EVENT_HANDLED;
     }
-    // hold: go to lowest level
-    else if (event == EV_click1_hold) {
-        set_state(steady_state, 0);
-        return EVENT_HANDLED;
-    }
     return EVENT_NOT_HANDLED;
 }
 
@@ -91,8 +90,8 @@ uint8_t steady_state(EventPtr event, uint16_t arg) {
     // turn LED on when we first enter the mode
     if (event == EV_enter_state) {
         // remember this level, unless it's moon or turbo
-        if ((arg > 0) && (arg < MAX_LEVEL))
-            memorized_level = arg;
+        if ((arg > 0) && (arg < MAX_LEVEL)) memorized_level = arg;
+        // use the requested level even if not memorized
         #ifdef USE_THERMAL_REGULATION
         target_level = arg;
         #endif
@@ -135,16 +134,12 @@ uint8_t steady_state(EventPtr event, uint16_t arg) {
     #ifdef USE_THERMAL_REGULATION
     // overheating: drop by 1 level
     else if (event == EV_temperature_high) {
-        if (actual_level > 1) {
-            set_level(actual_level - 1);
-        }
+        if (actual_level > 1) { set_level(actual_level - 1); }
         return EVENT_HANDLED;
     }
     // underheating: increase by 1 level if we're lower than the target
     else if (event == EV_temperature_low) {
-        if (actual_level < target_level) {
-            set_level(actual_level + 1);
-        }
+        if (actual_level < target_level) { set_level(actual_level + 1); }
         return EVENT_HANDLED;
     }
     #endif
@@ -152,18 +147,14 @@ uint8_t steady_state(EventPtr event, uint16_t arg) {
 }
 
 uint8_t lockout_state(EventPtr event, uint16_t arg) {
-    // stay asleep while locked, but allow waking long enough to click 4 times
+    // stay asleep while locked
     if (event == EV_tick) {
-        static uint8_t ticks_spent_awake = 0;
-        ticks_spent_awake ++;
-        PWM1_LVL = 0;  PWM2_LVL = 0;
-        if (ticks_spent_awake > 3 * TICKS_PER_SECOND) {
-            ticks_spent_awake = 0;
-            go_to_standby = 1;
-        }
+        PWM1_LVL = 0;  PWM2_LVL = 0;  // make sure emitters are off
+        // sleep 1 second after user stops pressing buttons
+        if (arg > TICKS_PER_SECOND) { go_to_standby = 1; }
         return MISCHIEF_MANAGED;
     }
-    // 4 clicks: exit
+    // 4 clicks: exit, and turn on at "low" level
     else if (event == EV_4clicks) {
         set_state(steady_state, 1);
         return MISCHIEF_MANAGED;
@@ -175,6 +166,9 @@ void low_voltage() {
     // step down by one level or turn off
     if (actual_level > 0) {
         set_level(actual_level - 1);
+        #ifdef USE_THERMAL_REGULATION
+        target_level = actual_level;  // don't let low temperature override LVP
+        #endif
     }
     else {
         set_state(off_state, 0);
diff --git a/spaghetti-monster/baton/baton.c b/spaghetti-monster/baton/baton.c
index 1266ddd..59a7196 100644
--- a/spaghetti-monster/baton/baton.c
+++ b/spaghetti-monster/baton/baton.c
@@ -20,22 +20,17 @@
 #define FSM_EMISAR_D4_DRIVER
 #define USE_LVP
 #define USE_THERMAL_REGULATION
-#define DEFAULT_THERM_CEIL 45
 #define USE_DEBUG_BLINK
 #define USE_DELAY_MS
 #define USE_DELAY_4MS
 #define USE_DELAY_ZERO
 #include "spaghetti-monster.h"
 
-// moon + ../../bin/level_calc.py 2 6 7135 18 10 150 FET 1 10 1500
-uint8_t pwm1_modes[] = { 3, 18, 110, 255, 255, 255,   0, };
-uint8_t pwm2_modes[] = { 0,  0,   0,   9,  58, 138, 255, };
-#define MAX_LEVEL (sizeof(pwm1_modes)-1)
-
 // FSM states
 uint8_t off_state(EventPtr event, uint16_t arg);
 uint8_t steady_state(EventPtr event, uint16_t arg);
 uint8_t party_strobe_state(EventPtr event, uint16_t arg);
+uint8_t lockout_state(EventPtr event, uint16_t arg);
 
 // brightness control
 uint8_t memorized_level = 1;
@@ -44,93 +39,100 @@ uint8_t actual_level = 0;
 uint8_t target_level = 0;
 #endif
 
+// moon + ../../bin/level_calc.py 2 6 7135 18 10 150 FET 1 10 1500
+uint8_t pwm1_levels[] = { 3, 18, 110, 255, 255, 255,   0, };
+uint8_t pwm2_levels[] = { 0,  0,   0,   9,  58, 138, 255, };
+#define MAX_LEVEL (sizeof(pwm1_levels)-1)
+
+// set LED brightness
 void set_level(uint8_t lvl) {
     actual_level = lvl;
-    PWM1_LVL = pwm1_modes[lvl];
-    PWM2_LVL = pwm2_modes[lvl];
+    PWM1_LVL = pwm1_levels[lvl];
+    PWM2_LVL = pwm2_levels[lvl];
 }
 
 uint8_t off_state(EventPtr event, uint16_t arg) {
     // turn emitter off when entering state
     if (event == EV_enter_state) {
-        PWM1_LVL = 0;
-        PWM2_LVL = 0;
-        // sleep while off  (lower power use)
-        go_to_standby = 1;
-        return 0;
+        go_to_standby = 1; // sleep while off  (lower power use)
+        return EVENT_HANDLED;
     }
     // hold (initially): go to lowest level, but allow abort for regular click
     else if (event == EV_click1_press) {
         set_level(0);
-        return 0;
+        return EVENT_HANDLED;
+    }
+    // hold (longer): go to lowest level
+    else if (event == EV_click1_hold) {
+        set_state(steady_state, 0);
+        return EVENT_HANDLED;
     }
     // 1 click (before timeout): go to memorized level, but allow abort for double click
     else if (event == EV_click1_release) {
         set_level(memorized_level);
-        return 0;
+        return EVENT_HANDLED;
     }
     // 1 click: regular mode
     else if (event == EV_1click) {
         set_state(steady_state, memorized_level);
-        return 0;
+        return EVENT_HANDLED;
     }
     // 2 clicks: highest mode
     else if (event == EV_2clicks) {
         set_state(steady_state, MAX_LEVEL);
-        return 0;
+        return EVENT_HANDLED;
     }
     // 3 clicks: strobe mode
     else if (event == EV_3clicks) {
         set_state(party_strobe_state, 255);
-        return 0;
+        return EVENT_HANDLED;
     }
-    // hold: go to lowest level
-    else if (event == EV_click1_hold) {
-        set_state(steady_state, 0);
-        return 0;
+    // 4 clicks: soft lockout
+    else if (event == EV_4clicks) {
+        set_state(lockout_state, 0);
+        return EVENT_HANDLED;
     }
-    return 1;
+    return EVENT_NOT_HANDLED;
 }
 
 uint8_t steady_state(EventPtr event, uint16_t arg) {
     // turn LED on when we first enter the mode
     if (event == EV_enter_state) {
         // remember this level, unless it's moon or turbo
-        if ((arg > 0) && (arg < MAX_LEVEL))
-            memorized_level = arg;
+        if ((arg > 0) && (arg < MAX_LEVEL)) memorized_level = arg;
         // use the requested level even if not memorized
         #ifdef USE_THERMAL_REGULATION
         target_level = arg;
         #endif
         set_level(arg);
-        return 0;
+        return EVENT_HANDLED;
     }
     // 1 click: off
     else if (event == EV_1click) {
         set_state(off_state, 0);
-        return 0;
+        return EVENT_HANDLED;
     }
     // 2 clicks: go to/from highest level
     else if (event == EV_2clicks) {
-        if (actual_level < MAX_LEVEL) {
+        if (actual_level < MAX_LEVEL) {  // go to turbo
             memorized_level = actual_level;  // in case we're on moon
             #ifdef USE_THERMAL_REGULATION
             target_level = MAX_LEVEL;
             #endif
             set_level(MAX_LEVEL);
         }
-        else {
+        else {  // return from turbo
             #ifdef USE_THERMAL_REGULATION
             target_level = memorized_level;
             #endif
             set_level(memorized_level);
         }
-        return 0;
+        return EVENT_HANDLED;
     }
     // 3 clicks: go to strobe modes
     else if (event == EV_3clicks) {
         set_state(party_strobe_state, 0xff);
-        return 0;
+        return EVENT_HANDLED;
     }
     // hold: change brightness
     else if (event == EV_click1_hold) {
@@ -141,25 +143,21 @@ uint8_t steady_state(EventPtr event, uint16_t arg) {
             #endif
             set_level(memorized_level);
         }
-        return 0;
+        return EVENT_HANDLED;
     }
     #ifdef USE_THERMAL_REGULATION
     // overheating: drop by 1 level
     else if (event == EV_temperature_high) {
-        if (actual_level > 1) {
-            set_level(actual_level - 1);
-        }
-        return 0;
+        if (actual_level > 1) { set_level(actual_level - 1); }
+        return EVENT_HANDLED;
     }
     // underheating: increase by 1 level if we're lower than the target
     else if (event == EV_temperature_low) {
-        if (actual_level < target_level) {
-            set_level(actual_level + 1);
-        }
-        return 0;
+        if (actual_level < target_level) { set_level(actual_level + 1); }
+        return EVENT_HANDLED;
     }
     #endif
-    return 1;
+    return EVENT_NOT_HANDLED;
 }
 
 uint8_t party_strobe_state(EventPtr event, uint16_t arg) {
@@ -168,7 +166,7 @@ uint8_t party_strobe_state(EventPtr event, uint16_t arg) {
     if (event == EV_enter_state) {
         if (arg < 64) between = arg;
         frames = 0;
-        return 0;
+        return MISCHIEF_MANAGED;
     }
     // tick: strobe the emitter
     else if (event == EV_tick) {
@@ -182,17 +180,17 @@ uint8_t party_strobe_state(EventPtr event, uint16_t arg) {
         //frames = (frames + 1) % between;
         frames++;
         if (frames > between) frames = 0;
-        return 0;
+        return MISCHIEF_MANAGED;
     }
     // 1 click: off
     else if (event == EV_1click) {
         set_state(off_state, 0);
-        return 0;
+        return MISCHIEF_MANAGED;
     }
     // 2 clicks: go back to regular modes
     else if (event == EV_2clicks) {
         set_state(steady_state, memorized_level);
-        return 0;
+        return MISCHIEF_MANAGED;
     }
     // hold: change speed
     else if (event == EV_click1_hold) {
@@ -200,9 +198,25 @@ uint8_t party_strobe_state(EventPtr event, uint16_t arg) {
             between = (between+1)%6;
             frames = 0;
         }
-        return 0;
+        return MISCHIEF_MANAGED;
+    }
+    return EVENT_NOT_HANDLED;
+}
+
+uint8_t lockout_state(EventPtr event, uint16_t arg) {
+    // stay asleep while locked
+    if (event == EV_tick) {
+        PWM1_LVL = 0;  PWM2_LVL = 0;  // make sure emitters are off
+        // sleep 1 second after user stops pressing
+        if (arg > TICKS_PER_SECOND) { go_to_standby = 1; }
+        return MISCHIEF_MANAGED;
+    }
+    // 4 clicks: exit, and turn on at "low" level
+    else if (event == EV_4clicks) {
+        set_state(steady_state, 1);
+        return MISCHIEF_MANAGED;
     }
-    return 1;
+    return EVENT_NOT_HANDLED;
 }
 
 void low_voltage() {
@@ -214,6 +228,10 @@ void low_voltage() {
     else if (current_state == steady_state) {
         if (actual_level > 0) {
             set_level(actual_level - 1);
+        #ifdef USE_THERMAL_REGULATION
+        target_level = actual_level;  // don't let low temperature override LVP
+        #endif
+
         }
         else {
             set_state(off_state, 0);
diff --git a/spaghetti-monster/baton/baton.txt b/spaghetti-monster/baton/baton.txt
new file mode 100644
index 0000000..2f0c22f
--- /dev/null
+++ b/spaghetti-monster/baton/baton.txt
@@ -0,0 +1,21 @@
+This is a very simple clone of the Olight Baton interface.  It is not 
+exact, but it has the basics.  Mostly, it exists for the purposes of 
+demonstrating how to create interfaces in FSM.
+
+While off:
+
+  - 1 click: Turn on (at memorized level).
+  - Hold: Turn on (at moon level).
+  - 2 clicks: Turn on (at highest level).
+  - 4 clicks: Soft lockout mode.
+
+While on:
+
+  - 1 click: Turn off.
+  - Hold: Change the brightness.  Goes up in steps, then wraps around.
+  - 2 clicks: Go to/from highest level.
+
+While locked:
+
+  - 4 clicks: Exit lockout mode.
+
-- 
cgit v1.2.3


From fa9baf747b32e77e4a753dec99b7b6dc4795af1b Mon Sep 17 00:00:00 2001
From: Selene ToyKeeper
Date: Mon, 15 Oct 2018 15:09:34 -0600
Subject: removed more-complex baton UI (which only different by having a party
 strobe mode), replaced it with the simpler version (since this UI exists
 mostly as an example)

---
 spaghetti-monster/baton/baton-simpler.c | 188 --------------------------------
 spaghetti-monster/baton/baton.c         |  86 +++------------
 2 files changed, 13 insertions(+), 261 deletions(-)
 delete mode 100644 spaghetti-monster/baton/baton-simpler.c

(limited to 'spaghetti-monster')

diff --git a/spaghetti-monster/baton/baton-simpler.c b/spaghetti-monster/baton/baton-simpler.c
deleted file mode 100644
index d4725ef..0000000
--- a/spaghetti-monster/baton/baton-simpler.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- * Baton: Olight Baton-like UI for SpaghettiMonster.
- *
- * Copyright (C) 2017 Selene ToyKeeper
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#define FSM_EMISAR_D4_DRIVER
-#define USE_LVP
-#define USE_THERMAL_REGULATION
-#define USE_DELAY_MS
-#include "spaghetti-monster.h"
-
-// FSM states
-uint8_t off_state(EventPtr event, uint16_t arg);
-uint8_t steady_state(EventPtr event, uint16_t arg);
-uint8_t lockout_state(EventPtr event, uint16_t arg);
-
-// brightness control
-uint8_t memorized_level = 1;
-uint8_t actual_level = 0;
-#ifdef USE_THERMAL_REGULATION
-uint8_t target_level = 0;
-#endif
-
-// moon + ../../bin/level_calc.py 2 6 7135 18 10 150 FET 1 10 1500
-uint8_t pwm1_levels[] = { 3, 18, 110, 255, 255, 255,   0, };
-uint8_t pwm2_levels[] = { 0,  0,   0,   9,  58, 138, 255, };
-#define MAX_LEVEL (sizeof(pwm1_levels)-1)
-
-// set LED brightness
-void set_level(uint8_t lvl) {
-    actual_level = lvl;
-    PWM1_LVL = pwm1_levels[lvl];
-    PWM2_LVL = pwm2_levels[lvl];
-}
-
-uint8_t off_state(EventPtr event, uint16_t arg) {
-    // turn emitter off when entering state
-    if (event == EV_enter_state) {
-        go_to_standby = 1; // sleep while off  (lower power use)
-        return EVENT_HANDLED;
-    }
-    // hold (initially): go to lowest level, but allow abort for regular click
-    else if (event == EV_click1_press) {
-        set_level(0);
-        return EVENT_HANDLED;
-    }
-    // hold (longer): go to lowest level
-    else if (event == EV_click1_hold) {
-        set_state(steady_state, 0);
-        return EVENT_HANDLED;
-    }
-    // 1 click (before timeout): go to memorized level, but allow abort for double click
-    else if (event == EV_click1_release) {
-        set_level(memorized_level);
-        return EVENT_HANDLED;
-    }
-    // 1 click: regular mode
-    else if (event == EV_1click) {
-        set_state(steady_state, memorized_level);
-        return EVENT_HANDLED;
-    }
-    // 2 clicks: highest mode
-    else if (event == EV_2clicks) {
-        set_state(steady_state, MAX_LEVEL);
-        return EVENT_HANDLED;
-    }
-    // 4 clicks: soft lockout
-    else if (event == EV_4clicks) {
-        set_state(lockout_state, 0);
-        return EVENT_HANDLED;
-    }
-    return EVENT_NOT_HANDLED;
-}
-
-uint8_t steady_state(EventPtr event, uint16_t arg) {
-    // turn LED on when we first enter the mode
-    if (event == EV_enter_state) {
-        // remember this level, unless it's moon or turbo
-        if ((arg > 0) && (arg < MAX_LEVEL)) memorized_level = arg;
-        // use the requested level even if not memorized
-        #ifdef USE_THERMAL_REGULATION
-        target_level = arg;
-        #endif
-        set_level(arg);
-        return EVENT_HANDLED;
-    }
-    // 1 click: off
-    else if (event == EV_1click) {
-        set_state(off_state, 0);
-        return EVENT_HANDLED;
-    }
-    // 2 clicks: go to/from highest level
-    else if (event == EV_2clicks) {
-        if (actual_level < MAX_LEVEL) {  // go to turbo
-            memorized_level = actual_level;  // in case we're on moon
-            #ifdef USE_THERMAL_REGULATION
-            target_level = MAX_LEVEL;
-            #endif
-            set_level(MAX_LEVEL);
-        }
-        else {  // return from turbo
-            #ifdef USE_THERMAL_REGULATION
-            target_level = memorized_level;
-            #endif
-            set_level(memorized_level);
-        }
-        return EVENT_HANDLED;
-    }
-    // hold: change brightness
-    else if (event == EV_click1_hold) {
-        if ((arg % HOLD_TIMEOUT) == 0) {
-            memorized_level = (actual_level+1) % (MAX_LEVEL+1);
-            #ifdef USE_THERMAL_REGULATION
-            target_level = memorized_level;
-            #endif
-            set_level(memorized_level);
-        }
-        return EVENT_HANDLED;
-    }
-    #ifdef USE_THERMAL_REGULATION
-    // overheating: drop by 1 level
-    else if (event == EV_temperature_high) {
-        if (actual_level > 1) { set_level(actual_level - 1); }
-        return EVENT_HANDLED;
-    }
-    // underheating: increase by 1 level if we're lower than the target
-    else if (event == EV_temperature_low) {
-        if (actual_level < target_level) { set_level(actual_level + 1); }
-        return EVENT_HANDLED;
-    }
-    #endif
-    return EVENT_NOT_HANDLED;
-}
-
-uint8_t lockout_state(EventPtr event, uint16_t arg) {
-    // stay asleep while locked
-    if (event == EV_tick) {
-        PWM1_LVL = 0;  PWM2_LVL = 0;  // make sure emitters are off
-        // sleep 1 second after user stops pressing buttons
-        if (arg > TICKS_PER_SECOND) { go_to_standby = 1; }
-        return MISCHIEF_MANAGED;
-    }
-    // 4 clicks: exit, and turn on at "low" level
-    else if (event == EV_4clicks) {
-        set_state(steady_state, 1);
-        return MISCHIEF_MANAGED;
-    }
-    return EVENT_NOT_HANDLED;
-}
-
-void low_voltage() {
-    // step down by one level or turn off
-    if (actual_level > 0) {
-        set_level(actual_level - 1);
-        #ifdef USE_THERMAL_REGULATION
-        target_level = actual_level;  // don't let low temperature override LVP
-        #endif
-    }
-    else {
-        set_state(off_state, 0);
-    }
-}
-
-void setup() {
-    // blink when power is connected
-    set_level(MAX_LEVEL/2);
-    delay_ms(10);
-    set_level(0);
-
-    push_state(off_state, 0);
-}
-
-void loop() {
-}
diff --git a/spaghetti-monster/baton/baton.c b/spaghetti-monster/baton/baton.c
index 59a7196..d4725ef 100644
--- a/spaghetti-monster/baton/baton.c
+++ b/spaghetti-monster/baton/baton.c
@@ -20,16 +20,12 @@
 #define FSM_EMISAR_D4_DRIVER
 #define USE_LVP
 #define USE_THERMAL_REGULATION
-#define USE_DEBUG_BLINK
 #define USE_DELAY_MS
-#define USE_DELAY_4MS
-#define USE_DELAY_ZERO
 #include "spaghetti-monster.h"
 
 // FSM states
 uint8_t off_state(EventPtr event, uint16_t arg);
 uint8_t steady_state(EventPtr event, uint16_t arg);
-uint8_t party_strobe_state(EventPtr event, uint16_t arg);
 uint8_t lockout_state(EventPtr event, uint16_t arg);
 
 // brightness control
@@ -82,11 +78,6 @@ uint8_t off_state(EventPtr event, uint16_t arg) {
         set_state(steady_state, MAX_LEVEL);
         return EVENT_HANDLED;
     }
-    // 3 clicks: strobe mode
-    else if (event == EV_3clicks) {
-        set_state(party_strobe_state, 255);
-        return EVENT_HANDLED;
-    }
     // 4 clicks: soft lockout
     else if (event == EV_4clicks) {
         set_state(lockout_state, 0);
@@ -129,11 +120,6 @@ uint8_t steady_state(EventPtr event, uint16_t arg) {
         }
         return EVENT_HANDLED;
     }
-    // 3 clicks: go to strobe modes
-    else if (event == EV_3clicks) {
-        set_state(party_strobe_state, 0xff);
-        return EVENT_HANDLED;
-    }
     // hold: change brightness
     else if (event == EV_click1_hold) {
         if ((arg % HOLD_TIMEOUT) == 0) {
@@ -160,54 +146,11 @@ uint8_t steady_state(EventPtr event, uint16_t arg) {
     return EVENT_NOT_HANDLED;
 }
 
-uint8_t party_strobe_state(EventPtr event, uint16_t arg) {
-    static volatile uint8_t frames = 0;
-    static volatile uint8_t between = 2;
-    if (event == EV_enter_state) {
-        if (arg < 64) between = arg;
-        frames = 0;
-        return MISCHIEF_MANAGED;
-    }
-    // tick: strobe the emitter
-    else if (event == EV_tick) {
-        if (frames == 0) {
-            PWM1_LVL = 0;
-            PWM2_LVL = 255;
-            if (between < 3) delay_zero();
-            else delay_ms(1);
-            PWM2_LVL = 0;
-        }
-        //frames = (frames + 1) % between;
-        frames++;
-        if (frames > between) frames = 0;
-        return MISCHIEF_MANAGED;
-    }
-    // 1 click: off
-    else if (event == EV_1click) {
-        set_state(off_state, 0);
-        return MISCHIEF_MANAGED;
-    }
-    // 2 clicks: go back to regular modes
-    else if (event == EV_2clicks) {
-        set_state(steady_state, memorized_level);
-        return MISCHIEF_MANAGED;
-    }
-    // hold: change speed
-    else if (event == EV_click1_hold) {
-        if ((arg % HOLD_TIMEOUT) == 0) {
-            between = (between+1)%6;
-            frames = 0;
-        }
-        return MISCHIEF_MANAGED;
-    }
-    return EVENT_NOT_HANDLED;
-}
-
 uint8_t lockout_state(EventPtr event, uint16_t arg) {
     // stay asleep while locked
     if (event == EV_tick) {
         PWM1_LVL = 0;  PWM2_LVL = 0;  // make sure emitters are off
-        // sleep 1 second after user stops pressing
+        // sleep 1 second after user stops pressing buttons
         if (arg > TICKS_PER_SECOND) { go_to_standby = 1; }
         return MISCHIEF_MANAGED;
     }
@@ -220,29 +163,26 @@ uint8_t lockout_state(EventPtr event, uint16_t arg) {
 }
 
 void low_voltage() {
-    // "step down" from strobe to level 2
-    if (current_state == party_strobe_state) {
-        set_state(steady_state, 1);
-    }
-    // in normal mode, step down by one level or turn off
-    else if (current_state == steady_state) {
-        if (actual_level > 0) {
-            set_level(actual_level - 1);
+    // step down by one level or turn off
+    if (actual_level > 0) {
+        set_level(actual_level - 1);
         #ifdef USE_THERMAL_REGULATION
         target_level = actual_level;  // don't let low temperature override LVP
         #endif
-
-        }
-        else {
-            set_state(off_state, 0);
-        }
+    }
+    else {
+        set_state(off_state, 0);
     }
 }
 
 void setup() {
-    debug_blink(2);
+    // blink when power is connected
+    set_level(MAX_LEVEL/2);
+    delay_ms(10);
+    set_level(0);
 
     push_state(off_state, 0);
 }
 
-void loop() { }
+void loop() {
+}
-- 
cgit v1.2.3


From a58ba65298350e9e7a2f8ce33645cdf1db5916cd Mon Sep 17 00:00:00 2001
From: Selene ToyKeeper
Date: Wed, 17 Oct 2018 23:46:10 -0600
Subject: PL47 doesn't need "low" mode for aux LED / switch LED

---
 spaghetti-monster/anduril/cfg-ff-pl47.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'spaghetti-monster')

diff --git a/spaghetti-monster/anduril/cfg-ff-pl47.h b/spaghetti-monster/anduril/cfg-ff-pl47.h
index d916e06..ef12964 100644
--- a/spaghetti-monster/anduril/cfg-ff-pl47.h
+++ b/spaghetti-monster/anduril/cfg-ff-pl47.h
@@ -17,7 +17,8 @@
 
 // the "low" mode doesn't work on this light's aux LEDs
 // (but it does work on the switch LEDs)
-//#define INDICATOR_LED_SKIP_LOW
+// Fireflies wants to skip aux LED mode 1 (low)
+#define INDICATOR_LED_SKIP_LOW
 
 // ... or if TICK_DURING_STANDBY is turned off:
 // off mode: high (2)
-- 
cgit v1.2.3


From a19560f92e0ead081e494d58dd6cf36c170c85c0 Mon Sep 17 00:00:00 2001
From: Selene ToyKeeper
Date: Wed, 17 Oct 2018 23:47:12 -0600
Subject: Initial untested support for the Sofirn SP36 (like a Q8 but smaller).

---
 spaghetti-monster/anduril/anduril.c    | 4 ++++
 spaghetti-monster/anduril/build-all.sh | 1 +
 2 files changed, 5 insertions(+)

(limited to 'spaghetti-monster')

diff --git a/spaghetti-monster/anduril/anduril.c b/spaghetti-monster/anduril/anduril.c
index 300e32b..085c674 100644
--- a/spaghetti-monster/anduril/anduril.c
+++ b/spaghetti-monster/anduril/anduril.c
@@ -32,6 +32,7 @@
 //#define FSM_FF_ROT66_DRIVER
 //#define FSM_FF_ROT66_219_DRIVER
 //#define FSM_FW3A_DRIVER
+//#define FSM_SOFIRN_SP36_DRIVER
 
 #define USE_LVP  // FIXME: won't build when this option is turned off
 
@@ -114,6 +115,9 @@
 #elif defined(FSM_FW3A_DRIVER)
 #include "cfg-fw3a.h"
 
+#elif defined(FSM_SOFIRN_SP36_DRIVER)
+#include "cfg-sofirn-sp36.h"
+
 #endif
 
 
diff --git a/spaghetti-monster/anduril/build-all.sh b/spaghetti-monster/anduril/build-all.sh
index 9e2a83c..1a1363c 100755
--- a/spaghetti-monster/anduril/build-all.sh
+++ b/spaghetti-monster/anduril/build-all.sh
@@ -16,6 +16,7 @@ for TARGET in \
   FF_ROT66 \
   FF_ROT66_219 \
   FW3A \
+  SOFIRN_SP36 \
   ; do
   echo "===== $TARGET ====="
   ../../../bin/build-85.sh "$UI" "-DFSM_${TARGET}_DRIVER"
-- 
cgit v1.2.3


From aab4ec0543a7563ff08fbc2013bd414c03e25648 Mon Sep 17 00:00:00 2001
From: Selene ToyKeeper
Date: Tue, 30 Oct 2018 00:42:43 -0600
Subject: Adjusted FF PL47 config.  Made muggle floor/ceiling configurable per
 config file.

---
 spaghetti-monster/anduril/anduril.c     |  4 ++++
 spaghetti-monster/anduril/cfg-ff-pl47.h | 18 +++++++++++++++---
 2 files changed, 19 insertions(+), 3 deletions(-)

(limited to 'spaghetti-monster')

diff --git a/spaghetti-monster/anduril/anduril.c b/spaghetti-monster/anduril/anduril.c
index 085c674..fd3c534 100644
--- a/spaghetti-monster/anduril/anduril.c
+++ b/spaghetti-monster/anduril/anduril.c
@@ -154,9 +154,13 @@
 #endif
 
 #if defined(USE_MUGGLE_MODE)
+#ifndef MUGGLE_FLOOR
 #define MUGGLE_FLOOR 22
+#endif
+#ifndef MUGGLE_CEILING
 #define MUGGLE_CEILING (MAX_1x7135+20)
 #endif
+#endif
 #define USE_IDLE_MODE  // reduce power use while awake and no tasks are pending
 #define USE_DYNAMIC_UNDERCLOCKING  // cut clock speed at very low modes for better efficiency
 
diff --git a/spaghetti-monster/anduril/cfg-ff-pl47.h b/spaghetti-monster/anduril/cfg-ff-pl47.h
index ef12964..d9431a1 100644
--- a/spaghetti-monster/anduril/cfg-ff-pl47.h
+++ b/spaghetti-monster/anduril/cfg-ff-pl47.h
@@ -39,15 +39,27 @@
 #define HALFSPEED_LEVEL 13
 #define QUARTERSPEED_LEVEL 6
 
-// ceiling is level 120/150
-#define RAMP_SMOOTH_CEIL (MAX_LEVEL*4/5)
-
 // thermal regulation parameters
 #ifdef MIN_THERM_STEPDOWN
 #undef MIN_THERM_STEPDOWN  // this should be lower, because 3x7135 instead of 1x7135
 #endif
 #define MIN_THERM_STEPDOWN 60  // lowest value it'll step down to
 
+// ceiling is level 120/150
+#define RAMP_SMOOTH_CEIL 120
+
+// 10, 28, 46, 65, 83, 101, 120  (83 is highest regulated)
+#define RAMP_DISCRETE_FLOOR 10
+#define RAMP_DISCRETE_CEIL 120
+#define RAMP_DISCRETE_STEPS 7
+
+// ~25 lm to ~300 lm
+#define MUGGLE_FLOOR 30
+#define MUGGLE_CEILING MAX_1x7135
+// ~50 lm to ~500 lm
+//#define MUGGLE_FLOOR 40
+//#define MUGGLE_CEILING 90
+
 // regulate down faster when the FET is active, slower otherwise
 #define THERM_FASTER_LEVEL 130  // throttle back faster when high
 
-- 
cgit v1.2.3


From 0110aa7f7988d54119ae085b5366918783b32901 Mon Sep 17 00:00:00 2001
From: Selene ToyKeeper
Date: Fri, 2 Nov 2018 15:41:00 -0600
Subject: Corrected anduril.txt with the new aux LED button mappings.

---
 spaghetti-monster/anduril/anduril.txt | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

(limited to 'spaghetti-monster')

diff --git a/spaghetti-monster/anduril/anduril.txt b/spaghetti-monster/anduril/anduril.txt
index 9cbef68..f0f0b4d 100644
--- a/spaghetti-monster/anduril/anduril.txt
+++ b/spaghetti-monster/anduril/anduril.txt
@@ -17,6 +17,9 @@ From off:
   * 4 clicks: lock-out
   * 5 clicks: momentary mode (disconnect power to exit)
   * 6 clicks: muggle mode
+  * On hardware with an indicator LED...
+    * 7 clicks: Change aux LED mode used in "off" mode.
+                (the modes are usually off/low/high/blinking)
 
 In steady mode:
   * 1 click: off
@@ -111,8 +114,8 @@ Lockout mode:
   * Hold: momentary moon
   * 4 clicks: exit lockout (return to regular "off" mode)
   * On hardware with an indicator LED...
-    * 3 clicks: Change button brightness used in lockout mode.  (low/high/off)
-    * Click, click, hold: Change button brightness used in "off" mode.
+    * 3 clicks: Change aux LED brightness used in lockout mode.
+                (the modes are usually off/low/high/blinking)
 
 Momentary mode:
   * Press button: Light on (at memorized level).
-- 
cgit v1.2.3


From 79155e4f242c10b7ffdf3fb31033576ee8626372 Mon Sep 17 00:00:00 2001
From: Selene ToyKeeper
Date: Sat, 3 Nov 2018 16:42:26 -0600
Subject: Applied recent updates to FSM build scripts, and added some really
 simple Makefiles.

---
 spaghetti-monster/anduril/Makefile        | 7 +++++++
 spaghetti-monster/anduril/build-all.sh    | 2 +-
 spaghetti-monster/rampingios/Makefile     | 7 +++++++
 spaghetti-monster/rampingios/build-all.sh | 2 +-
 4 files changed, 16 insertions(+), 2 deletions(-)
 create mode 100644 spaghetti-monster/anduril/Makefile
 create mode 100644 spaghetti-monster/rampingios/Makefile

(limited to 'spaghetti-monster')

diff --git a/spaghetti-monster/anduril/Makefile b/spaghetti-monster/anduril/Makefile
new file mode 100644
index 0000000..25c56fa
--- /dev/null
+++ b/spaghetti-monster/anduril/Makefile
@@ -0,0 +1,7 @@
+all:
+	./build-all.sh
+
+clean:
+	rm -f *.hex *~ *.elf *.o
+
+.phony: clean
diff --git a/spaghetti-monster/anduril/build-all.sh b/spaghetti-monster/anduril/build-all.sh
index 9e2a83c..68d32fb 100755
--- a/spaghetti-monster/anduril/build-all.sh
+++ b/spaghetti-monster/anduril/build-all.sh
@@ -18,6 +18,6 @@ for TARGET in \
   FW3A \
   ; do
   echo "===== $TARGET ====="
-  ../../../bin/build-85.sh "$UI" "-DFSM_${TARGET}_DRIVER"
+  ../../../bin/build.sh 85 "$UI" "-DFSM_${TARGET}_DRIVER"
   mv -f "$UI".hex "$UI".$TARGET.hex
 done
diff --git a/spaghetti-monster/rampingios/Makefile b/spaghetti-monster/rampingios/Makefile
new file mode 100644
index 0000000..8db198e
--- /dev/null
+++ b/spaghetti-monster/rampingios/Makefile
@@ -0,0 +1,7 @@
+all:
+	./build-all.sh
+
+clean:
+	rm -f *.hex cfg-*.h *~ *.elf *.o
+
+.phony: clean
diff --git a/spaghetti-monster/rampingios/build-all.sh b/spaghetti-monster/rampingios/build-all.sh
index 22597b7..5b75fe4 100755
--- a/spaghetti-monster/rampingios/build-all.sh
+++ b/spaghetti-monster/rampingios/build-all.sh
@@ -13,6 +13,6 @@ for TARGET in \
   EMISAR_D4S_219C \
   ; do
   echo "===== $TARGET ====="
-  ../../../bin/build-85.sh "$UI" "-DFSM_${TARGET}_DRIVER"
+  ../../../bin/build.sh 85 "$UI" "-DFSM_${TARGET}_DRIVER"
   mv -f "$UI".hex "$UI".$TARGET.hex
 done
-- 
cgit v1.2.3


From 9e3e7a8e6a7c0ed3abe21b9ae24c07d8c13e3e93 Mon Sep 17 00:00:00 2001
From: Selene ToyKeeper
Date: Sat, 3 Nov 2018 17:22:58 -0600
Subject: added missing ifdef which broke per-hardware ramp lengths

---
 spaghetti-monster/anduril/anduril.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'spaghetti-monster')

diff --git a/spaghetti-monster/anduril/anduril.c b/spaghetti-monster/anduril/anduril.c
index fd3c534..df478ee 100644
--- a/spaghetti-monster/anduril/anduril.c
+++ b/spaghetti-monster/anduril/anduril.c
@@ -140,7 +140,9 @@
 /********* Configure SpaghettiMonster *********/
 #define USE_DELAY_ZERO
 #define USE_RAMPING
+#ifndef RAMP_LENGTH
 #define RAMP_LENGTH 150  // default, if not overridden in a driver cfg file
+#endif
 #define MAX_BIKING_LEVEL 120  // should be 127 or less
 #define USE_BATTCHECK
 
-- 
cgit v1.2.3


From 5699260c774749d9a6b1b5ad855a816806ed1be7 Mon Sep 17 00:00:00 2001
From: Selene ToyKeeper
Date: Sat, 3 Nov 2018 18:46:57 -0600
Subject: forgot to add the Sofirn SP36 config file earlier, oops

---
 spaghetti-monster/anduril/cfg-sofirn-sp36.h | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
 create mode 100644 spaghetti-monster/anduril/cfg-sofirn-sp36.h

(limited to 'spaghetti-monster')

diff --git a/spaghetti-monster/anduril/cfg-sofirn-sp36.h b/spaghetti-monster/anduril/cfg-sofirn-sp36.h
new file mode 100644
index 0000000..11e3735
--- /dev/null
+++ b/spaghetti-monster/anduril/cfg-sofirn-sp36.h
@@ -0,0 +1,16 @@
+// Sofirn SP36 (small Q8) config options for Anduril
+
+#define FSM_BLF_Q8_DRIVER
+#include "cfg-blf-q8.h"
+
+// stop panicking at ~50% power or ~2000 lm
+#ifdef THERM_FASTER_LEVEL
+#undef THERM_FASTER_LEVEL
+#endif
+#define THERM_FASTER_LEVEL 125
+
+// be extra-careful at high levels
+#ifndef THERM_HARD_TURBO_DROP
+#define THERM_HARD_TURBO_DROP
+#endif
+
-- 
cgit v1.2.3


From 94ba77de5c2c4bf8df3f23ac9ab397a360a75e69 Mon Sep 17 00:00:00 2001
From: Selene ToyKeeper
Date: Sat, 3 Nov 2018 18:55:31 -0600
Subject: Made it easier to override hwdef-*.h values in cfg-*.h files.

---
 spaghetti-monster/anduril/cfg-blf-gt.h    | 4 ----
 spaghetti-monster/anduril/cfg-blf-q8.h    | 4 ----
 spaghetti-monster/anduril/cfg-emisar-d4.h | 3 ---
 spaghetti-monster/anduril/cfg-ff-pl47.h   | 3 ---
 spaghetti-monster/anduril/cfg-ff-rot66.h  | 4 ----
 spaghetti-monster/anduril/cfg-fw3a.h      | 4 ----
 6 files changed, 22 deletions(-)

(limited to 'spaghetti-monster')

diff --git a/spaghetti-monster/anduril/cfg-blf-gt.h b/spaghetti-monster/anduril/cfg-blf-gt.h
index 369d028..a29d7e7 100644
--- a/spaghetti-monster/anduril/cfg-blf-gt.h
+++ b/spaghetti-monster/anduril/cfg-blf-gt.h
@@ -14,10 +14,6 @@
 
 //#undef USE_SET_LEVEL_GRADUALLY
 
-#ifdef RAMP_LENGTH
-#undef RAMP_LENGTH
-#endif
-
 #define RAMP_LENGTH 150
 // First 60 values: level_calc.py 1 60 7135 4 5.0 255
 // Remainder: all 255 (buck driver at 100% duty cycle)
diff --git a/spaghetti-monster/anduril/cfg-blf-q8.h b/spaghetti-monster/anduril/cfg-blf-q8.h
index 269aae9..1b9b971 100644
--- a/spaghetti-monster/anduril/cfg-blf-q8.h
+++ b/spaghetti-monster/anduril/cfg-blf-q8.h
@@ -7,10 +7,6 @@
 // enable blinking indicator LED while off
 #define TICK_DURING_STANDBY
 
-#ifdef RAMP_LENGTH
-#undef RAMP_LENGTH
-#endif
-
 // copied from Emisar D4 ramp
 // ../../bin/level_calc.py 1 65 7135 1 0.8 150
 // ... mixed with this:
diff --git a/spaghetti-monster/anduril/cfg-emisar-d4.h b/spaghetti-monster/anduril/cfg-emisar-d4.h
index 251f81d..e83c62d 100644
--- a/spaghetti-monster/anduril/cfg-emisar-d4.h
+++ b/spaghetti-monster/anduril/cfg-emisar-d4.h
@@ -1,8 +1,5 @@
 // Emisar D4 config options for Anduril
 
-#ifdef RAMP_LENGTH
-#undef RAMP_LENGTH
-#endif
 // ../../bin/level_calc.py 1 65 7135 1 0.8 150
 // ... mixed with this:
 // ../../bin/level_calc.py 2 150 7135 4 0.33 150 FET 1 10 1500
diff --git a/spaghetti-monster/anduril/cfg-ff-pl47.h b/spaghetti-monster/anduril/cfg-ff-pl47.h
index d9431a1..2e5647d 100644
--- a/spaghetti-monster/anduril/cfg-ff-pl47.h
+++ b/spaghetti-monster/anduril/cfg-ff-pl47.h
@@ -26,9 +26,6 @@
 //#define INDICATOR_LED_DEFAULT_MODE ((0<<2) + 2)
 
 
-#ifdef RAMP_LENGTH
-#undef RAMP_LENGTH
-#endif
 #define RAMP_LENGTH 150
 
 // driver is a FET + 3x7135, ~400 lm at highest regulated level
diff --git a/spaghetti-monster/anduril/cfg-ff-rot66.h b/spaghetti-monster/anduril/cfg-ff-rot66.h
index c8e0d52..165b2ba 100644
--- a/spaghetti-monster/anduril/cfg-ff-rot66.h
+++ b/spaghetti-monster/anduril/cfg-ff-rot66.h
@@ -18,10 +18,6 @@
 #define INDICATOR_LED_DEFAULT_MODE ((0<<2) + 2)
 
 
-#ifdef RAMP_LENGTH
-#undef RAMP_LENGTH
-#endif
-
 // driver is a FET+N+1,
 // where N=6 for the 219b version,
 // or N=13 for the XP-L HI version (this version)
diff --git a/spaghetti-monster/anduril/cfg-fw3a.h b/spaghetti-monster/anduril/cfg-fw3a.h
index 65f1e48..efa70ae 100644
--- a/spaghetti-monster/anduril/cfg-fw3a.h
+++ b/spaghetti-monster/anduril/cfg-fw3a.h
@@ -1,9 +1,5 @@
 // FW3A config options for Anduril
 
-#ifdef RAMP_LENGTH
-#undef RAMP_LENGTH
-#endif
-
 // ../../bin/level_calc.py 1 65 7135 1 0.8 150
 // ... mixed with this:
 // ../../../bin/level_calc.py 3 150 7135 1 0.33 150 7135 1 1 850 FET 1 10 1500
-- 
cgit v1.2.3