From edb190567878db0dc7a4af563ca001d97ab03cac Mon Sep 17 00:00:00 2001
From: Selene ToyKeeper
Date: Mon, 23 May 2016 19:19:49 -0600
Subject: Added bistro-tripledown.c. It's a slight mod of bistro, to make it
 work on TripleDown drivers.

---
 tk-attiny.h | 35 ++++++++++++++++++++++++++++++++++-
 1 file changed, 34 insertions(+), 1 deletion(-)

(limited to 'tk-attiny.h')

diff --git a/tk-attiny.h b/tk-attiny.h
index 6390416..4058fea 100644
--- a/tk-attiny.h
+++ b/tk-attiny.h
@@ -36,7 +36,7 @@
     #define F_CPU 8000000UL
     #define EEPSIZE 128
     #define V_REF REFS1
-    #define BOGOMIPS 2000
+    #define BOGOMIPS (F_CPU/3200)
 #else
     Hey, you need to define ATTINY.
 #endif
@@ -75,6 +75,39 @@
 
 #endif  // FET_7135_LAYOUT
 
+#ifdef TRIPLEDOWN_LAYOUT
+/*
+ *             ----
+ *     Reset -|1  8|- VCC
+ *       OTC -|2  7|- Voltage ADC
+ * PWM (FET) -|3  6|- PWM (6x7135)
+ *       GND -|4  5|- PWM (1x7135)
+ *             ----
+ */
+
+#define STAR2_PIN   PB0     // If this pin isn't used for ALT_PWM
+
+#define CAP_PIN     PB3     // pin 2, OTC
+#define CAP_CHANNEL 0x03    // MUX 03 corresponds with PB3 (Star 4)
+#define CAP_DIDR    ADC3D   // Digital input disable bit corresponding with PB3
+
+#define PWM_PIN     PB1     // pin 6, 6x7135 PWM
+#define PWM_LVL     OCR0B   // OCR0B is the output compare register for PB1
+#define ALT_PWM_PIN PB0     // pin 5, 1x7135 PWM
+#define ALT_PWM_LVL OCR0A   // OCR0A is the output compare register for PB0
+#define FET_PWM_PIN PB4     // pin 3
+#define FET_PWM_LVL OCR1B   // output compare register for PB4
+
+#define VOLTAGE_PIN PB2     // pin 7, voltage ADC
+#define ADC_CHANNEL 0x01    // MUX 01 corresponds with PB2
+#define ADC_DIDR    ADC1D   // Digital input disable bit corresponding with PB2
+#define ADC_PRSCL   0x06    // clk/64
+
+//#define TEMP_DIDR   ADC4D
+#define TEMP_CHANNEL 0b00001111
+
+#endif  // FET_7135_LAYOUT
+
 #ifdef FERRERO_ROCHER_LAYOUT
 /*
  *            ----
-- 
cgit v1.2.3