From 6be8fff532c4be83126517a6e3b7b725548761c2 Mon Sep 17 00:00:00 2001
From: Selene ToyKeeper
Date: Sun, 22 Sep 2024 17:15:47 -0600
Subject: hank-lume-x1 cleanup and calibration, part 1: - changed model number
 from 0281 to 0171 - cleaned up blink_negative and AUXLED_RGB_DIFFERENT_PORTS
 a little   (but the latter needs a complete refactor, as soon as the   
 hardware abstraction code can handle aux LEDs better) - cleaned up
 USE_LONG_BLINK_FOR_NEGATIVE_SIGN a little - removed USE_OTG_IN_MOMENTARY
 since it's not actually used - moved hw/loneoceans/lume-x1-avr32dd20/* files
 into hw/hank/lume-x1/ - superficial cleanup on hank/lume-x1/hwdef.* - removed
 some of the extra stuff from hank/lume-x1/anduril.h - adjusted calibration
 (especially ramp table) on hank-lume-x1   (ramp shape is pretty close to a
 D4K-boost now, but with more firefly modes)   (calibration is based on a
 sample size of 1, further testing needed)

---
 ui/anduril/anduril.c        | 6 ++----
 ui/anduril/momentary-mode.c | 6 ------
 2 files changed, 2 insertions(+), 10 deletions(-)

(limited to 'ui')

diff --git a/ui/anduril/anduril.c b/ui/anduril/anduril.c
index c4bd99f..383acbc 100644
--- a/ui/anduril/anduril.c
+++ b/ui/anduril/anduril.c
@@ -344,15 +344,13 @@ void loop() {
         // temperature is type int16_t
         // but blink_num is uint8_t, so -10 will blink as 246
         #ifdef USE_LONG_BLINK_FOR_NEGATIVE_SIGN
-        if (temperature < 0){
+        if (temperature < 0) {
             blink_negative();
             blink_num(-temperature);
         }
-        else {blink_num(temperature);}
+        else
         #endif
-        #ifndef USE_LONG_BLINK_FOR_NEGATIVE_SIGN
         blink_num(temperature);
-        #endif
         nice_delay_ms(1000);
     }
     #endif
diff --git a/ui/anduril/momentary-mode.c b/ui/anduril/momentary-mode.c
index 31a9411..327302a 100644
--- a/ui/anduril/momentary-mode.c
+++ b/ui/anduril/momentary-mode.c
@@ -7,12 +7,6 @@
 #include "anduril/momentary-mode.h"
 
 uint8_t momentary_state(Event event, uint16_t arg) {
-
-    // enable OTG mode, if defined 
-    #ifdef USE_OTG_IN_MOMENTARY
-    POWER_BANK_EN_PORT |= POWER_BANK_EN_PIN; 
-    #endif
-
     // init strobe mode, if relevant
     #ifdef USE_STROBE_STATE
     if ((event == EV_enter_state) && (momentary_mode != 0)) {
-- 
cgit v1.2.3