// Noctigon KR4 config options for Anduril // (and Emisar D4v2.5, which uses KR4 driver plus a button LED) // Copyright (C) 2020-2023 Selene ToyKeeper // SPDX-License-Identifier: GPL-3.0-or-later #pragma once #define MODEL_NUMBER "0211" #include "hwdef-noctigon-kr4.h" #include "hank-cfg.h" // ATTINY: 1634 // brightness w/ SST-20 4000K LEDs: // 0/1023: 0.35 lm // 1/1023: 2.56 lm // max regulated: 1740 lm // FET: ~3700 lm #define RAMP_SIZE 150 // nice low lows, but might have visible ripple on some lights: // maxreg at 130, dynamic PWM: level_calc.py 5.01 2 149 7135 1 0.3 1740 FET 1 10 3190 --pwm dyn:64:16384:255 // (plus one extra level at the beginning for moon) #define PWM1_LEVELS 0,1,1,2,2,3,4,5,6,7,8,9,11,12,14,16,17,19,22,24,26,29,31,34,37,40,43,46,49,53,56,60,63,67,71,74,78,82,86,89,93,96,99,103,105,108,110,112,114,115,116,116,115,114,112,109,106,101,95,89,81,71,60,48,34,19,20,21,22,23,24,26,27,28,30,31,32,34,36,37,39,41,43,45,47,49,51,53,56,58,61,63,66,69,72,75,78,81,84,88,91,95,99,103,107,111,115,119,124,129,133,138,143,149,154,159,165,171,177,183,189,196,203,210,217,224,231,239,247,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0 #define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,9,20,30,41,52,63,75,87,99,112,125,138,151,165,179,194,208,224,239,255 #define PWM_TOPS 16383,16383,11750,14690,9183,12439,13615,13955,13877,13560,13093,12529,13291,12513,12756,12769,11893,11747,12085,11725,11329,11316,10851,10713,10518,10282,10016,9729,9428,9298,8971,8794,8459,8257,8043,7715,7497,7275,7052,6753,6538,6260,5994,5798,5501,5271,5006,4758,4525,4268,4030,3775,3508,3263,3010,2752,2517,2256,1998,1763,1512,1249,994,749,497,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255 #define MIN_THERM_STEPDOWN 66 // should be above highest dyn_pwm level // less ripple, but lows are a bit higher than ideal: // maxreg at 130, dynamic PWM: level_calc.py 5.01 2 149 7135 1 0.3 1740 FET 1 10 3190 --pwm dyn:64:4096:255 // (plus one extra level at the beginning for moon) //#define PWM1_LEVELS 0,1,1,1,1,1,1,2,2,2,2,3,3,3,4,4,5,5,6,6,7,8,8,9,10,11,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,32,33,33,34,34,34,34,34,34,33,32,31,30,28,26,24,21,19,20,21,22,23,24,26,27,28,30,31,32,34,36,37,39,41,43,45,47,49,51,53,56,58,61,63,66,69,72,75,78,81,84,88,91,95,99,103,107,111,115,119,124,129,133,138,143,149,154,159,165,171,177,183,189,196,203,210,217,224,231,239,247,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0 //#define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,9,20,30,41,52,63,75,87,99,112,125,138,151,165,179,194,208,224,239,255 //#define PWM_TOPS 4095,4095,3760,3403,3020,2611,2176,3582,3062,2515,1940,3221,2761,2283,2998,2584,3004,2631,2899,2555,2735,2836,2538,2606,2636,2638,2387,2382,2361,2328,2286,2238,2185,2129,2070,2010,1949,1887,1826,1766,1706,1648,1591,1536,1482,1429,1379,1329,1242,1199,1122,1084,1016,953,895,842,791,723,659,602,549,482,422,367,302,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255 #define MAX_1x7135 130 #define DEFAULT_LEVEL 50 #define HALFSPEED_LEVEL 12 #define QUARTERSPEED_LEVEL 4 #define RAMP_SMOOTH_FLOOR 11 // low levels may be unreliable #define RAMP_SMOOTH_CEIL 130 // 11 30 [50] 70 90 110 [130] #define RAMP_DISCRETE_FLOOR 11 #define RAMP_DISCRETE_CEIL RAMP_SMOOTH_CEIL #define RAMP_DISCRETE_STEPS 7 // safe limit ~30% power / ~1300 lm (can sustain 900 lm) #define SIMPLE_UI_FLOOR RAMP_DISCRETE_FLOOR #define SIMPLE_UI_CEIL 120 #define SIMPLE_UI_STEPS 5 // stop panicking at ~1300 lm #define THERM_FASTER_LEVEL 120 #define THERM_CAL_OFFSET 5 // the power regulator is a bit slow, so push it harder for a quick response from off #define DEFAULT_JUMP_START_LEVEL 21 #define BLINK_BRIGHTNESS DEFAULT_LEVEL #define BLINK_ONCE_TIME 12 // show each channel while it scroll by in the menu #define USE_CONFIG_COLORS // there is usually no lighted button, so // blink numbers on the main LEDs by default (but allow user to change it) #define DEFAULT_BLINK_CHANNEL CM_MAIN // slow down party strobe; this driver can't pulse for 1ms or less // (only needed on no-FET build) //#define PARTY_STROBE_ONTIME 2 // use aux red + aux blue for police strobe #define USE_POLICE_COLOR_STROBE_MODE #define POLICE_STROBE_USES_AUX #define POLICE_COLOR_STROBE_CH1 CM_AUXRED #define POLICE_COLOR_STROBE_CH2 CM_AUXBLU // the default of 26 looks a bit rough, so increase it to make it smoother #define CANDLE_AMPLITUDE 33 // don't blink while ramping #ifdef BLINK_AT_RAMP_MIDDLE #undef BLINK_AT_RAMP_MIDDLE #endif // can't reset the normal way because power is connected before the button #define USE_SOFT_FACTORY_RESET