// Noctigon K1 PWM helper functions
// Copyright (C) 2019-2023 Selene ToyKeeper
// SPDX-License-Identifier: GPL-3.0-or-later

#pragma once

#include "chan-rgbaux.c"

void set_level_main(uint8_t level);
bool gradual_tick_main(uint8_t gt);


Channel channels[] = {
    { // channel 1 only
        .set_level    = set_level_main,
        .gradual_tick = gradual_tick_main
    },
    RGB_AUX_CHANNELS
};


// single set of LEDs with 2 stacked power channels, linear + DD FET
void set_level_main(uint8_t level) {
    if (level == 0) {
        CH1_PWM = 0;
        //CH2_PWM = 0;
        //PWM_CNT = 0;  // reset phase
        CH1_ENABLE_PORT &= ~(1 << CH1_ENABLE_PIN);  // disable opamp
        return;
    }

    CH1_ENABLE_PORT |= (1 << CH1_ENABLE_PIN);  // enable opamp

    level --;  // PWM array index = level - 1
    PWM_DATATYPE ch1_pwm = PWM_GET(pwm1_levels, level);
    //PWM_DATATYPE ch2_pwm = PWM_GET(pwm2_levels, level);
    // pulse frequency modulation, a.k.a. dynamic PWM
    //uint16_t top = PWM_GET16(pwm_tops, level);

    CH1_PWM = ch1_pwm;
    //CH2_PWM = ch2_pwm;
    // wait to sync the counter and avoid flashes
    //while(actual_level && (PWM_CNT > (top - 32))) {}
    //PWM_TOP = top;
    // force reset phase when turning on from zero
    // (because otherwise the initial response is inconsistent)
    //if (! actual_level) PWM_CNT = 0;
}

bool gradual_tick_main(uint8_t gt) {
    PWM_DATATYPE pwm1 = PWM_GET(pwm1_levels, gt);
    //PWM_DATATYPE pwm2 = PWM_GET(pwm2_levels, gt);

    GRADUAL_ADJUST_SIMPLE (pwm1, CH1_PWM);
    //GRADUAL_ADJUST_STACKED(pwm1, CH1_PWM, PWM_TOP_INIT);
    //GRADUAL_ADJUST_SIMPLE (pwm2, CH2_PWM);

    if (   (pwm1 == CH1_PWM)
        // && (pwm2 == CH2_PWM)
       ) {
        return true;  // done
    }
    return false;  // not done yet
}