Replaced FSM_*_LAYOUT with FSM_*_DRIVER because I think it makes more sense.

Made momentary.c compile again.
Updated fsm-main to use whichever delay function is available.

7 files changed, 21 insertions, 16 deletions

diff --git a/spaghetti-monster/anduril.c b/spaghetti-monster/anduril.c
index 6c21bf3..998c0c5 100644
--- a/spaghetti-monster/anduril.c
+++ b/spaghetti-monster/anduril.c
@@ -18,7 +18,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#define FSM_EMISAR_D4_LAYOUT
+#define FSM_EMISAR_D4_DRIVER
 #define USE_LVP
 #define USE_THERMAL_REGULATION
 #define DEFAULT_THERM_CEIL 45
diff --git a/spaghetti-monster/baton.c b/spaghetti-monster/baton.c
index 2489f4e..4ba329e 100644
--- a/spaghetti-monster/baton.c
+++ b/spaghetti-monster/baton.c
@@ -17,7 +17,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#define FSM_EMISAR_D4_LAYOUT
+#define FSM_EMISAR_D4_DRIVER
 #define USE_LVP
 #define USE_THERMAL_REGULATION
 #define DEFAULT_THERM_CEIL 45
diff --git a/spaghetti-monster/darkhorse.c b/spaghetti-monster/darkhorse.c
index 2aa1b7b..2aa3e90 100644
--- a/spaghetti-monster/darkhorse.c
+++ b/spaghetti-monster/darkhorse.c
@@ -17,7 +17,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#define FSM_EMISAR_D4_LAYOUT
+#define FSM_EMISAR_D4_DRIVER
 #define USE_LVP
 #define USE_THERMAL_REGULATION
 #define DEFAULT_THERM_CEIL 45
diff --git a/spaghetti-monster/fsm-main.c b/spaghetti-monster/fsm-main.c
index ae63126..9505322 100644
--- a/spaghetti-monster/fsm-main.c
+++ b/spaghetti-monster/fsm-main.c
@@ -89,7 +89,11 @@ int main() {
     push_state(default_state, 0);
 
     // in case any spurious button presses were detected at boot
+    #ifdef USE_DELAY_MS
     delay_ms(1);
+    #else
+    delay_4ms(1);
+    #endif
     empty_event_sequence();
 
     // call recipe's setup
diff --git a/spaghetti-monster/momentary.c b/spaghetti-monster/momentary.c
index fc26db3..6b049f4 100644
--- a/spaghetti-monster/momentary.c
+++ b/spaghetti-monster/momentary.c
@@ -19,9 +19,10 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#define FSM_EMISAR_D4_LAYOUT
+#define FSM_EMISAR_D4_DRIVER
 #define USE_LVP
 #define USE_DEBUG_BLINK
+#define USE_DELAY_4MS
 #include "spaghetti-monster.h"
 
 volatile uint8_t brightness;
diff --git a/spaghetti-monster/ramping-ui.c b/spaghetti-monster/ramping-ui.c
index 2369686..527a824 100644
--- a/spaghetti-monster/ramping-ui.c
+++ b/spaghetti-monster/ramping-ui.c
@@ -17,7 +17,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#define FSM_EMISAR_D4_LAYOUT
+#define FSM_EMISAR_D4_DRIVER
 #define USE_LVP
 #define USE_THERMAL_REGULATION
 #define DEFAULT_THERM_CEIL 32
diff --git a/tk-attiny.h b/tk-attiny.h
index 2cfe4fd..7939ccc 100644
--- a/tk-attiny.h
+++ b/tk-attiny.h
@@ -59,7 +59,7 @@
 
 /******************** I/O pin and register layout ************************/
 #ifdef FET_7135_LAYOUT
-#define LAYOUT_DEFINED
+#define DRIVER_TYPE_DEFINED
 /*
  *           ----
  *   Reset -|1  8|- VCC
@@ -95,7 +95,7 @@
 #endif  // FET_7135_LAYOUT
 
 #ifdef TRIPLEDOWN_LAYOUT
-#define LAYOUT_DEFINED
+#define DRIVER_TYPE_DEFINED
 /*
  *             ----
  *     Reset -|1  8|- VCC
@@ -132,7 +132,7 @@
 #endif  // TRIPLEDOWN_LAYOUT
 
 #ifdef FERRERO_ROCHER_LAYOUT
-#define LAYOUT_DEFINED
+#define DRIVER_TYPE_DEFINED
 /*
  *            ----
  *    Reset -|1  8|- VCC
@@ -147,7 +147,7 @@
 #endif  // FERRERO_ROCHER_LAYOUT
 
 #ifdef NANJG_LAYOUT
-#define LAYOUT_DEFINED
+#define DRIVER_TYPE_DEFINED
 #define STAR2_PIN   PB0
 #define STAR3_PIN   PB4
 #define STAR4_PIN   PB3
@@ -165,8 +165,8 @@
 #endif  // NANJG_LAYOUT
 
 
-#ifdef FSM_EMISAR_D4_LAYOUT
-#define LAYOUT_DEFINED
+#ifdef FSM_EMISAR_D4_DRIVER
+#define DRIVER_TYPE_DEFINED
 /*
  *           ----
  *   Reset -|1  8|- VCC
@@ -199,11 +199,11 @@
 #define FAST 0xA3           // fast PWM both channels
 #define PHASE 0xA1          // phase-correct PWM both channels
 
-#endif
+#endif  // ifdef FSM_EMISAR_D4_DRIVER
 
 
-#ifdef FSM_TKSABER_LAYOUT
-#define LAYOUT_DEFINED
+#ifdef FSM_TKSABER_DRIVER
+#define DRIVER_TYPE_DEFINED
 /*
  *             ----
  *     Reset -|1  8|- VCC
@@ -233,10 +233,10 @@
 #define FAST 0xA3           // fast PWM both channels
 #define PHASE 0xA1          // phase-correct PWM both channels
 
-#endif  // TKSABER_LAYOUT
+#endif  // TKSABER_DRIVER
 
 
-#ifndef LAYOUT_DEFINED
+#ifndef DRIVER_TYPE_DEFINED
 #error Hey, you need to define an I/O pin layout.
 #endif