renamed cfg.h -> anduril.h so each UI can have its own cfg (part 1)

(still need to update file contents afterward,
 but doing it in a separate commit so git can detect renames easier)

1 files changed, 0 insertions, 106 deletions

diff --git a/hw/hank/emisar-d4k-3ch/cfg.h b/hw/hank/emisar-d4k-3ch/cfg.h
deleted file mode 100644
index 10aeb60..0000000
--- a/hw/hank/emisar-d4k-3ch/cfg.h
+++ /dev/null
@@ -1,106 +0,0 @@
-// Emisar D4K 3-channel config options for Anduril
-// Copyright (C) 2023 Selene ToyKeeper
-// SPDX-License-Identifier: GPL-3.0-or-later
-#pragma once
-
-#define MODEL_NUMBER "0151"
-#include "hank/emisar-d4k-3ch/hwdef.h"
-#include "hank/cfg.h"
-// ATTINY: 1634
-
-// this light has three aux LED channels: R, G, B
-#define USE_AUX_RGB_LEDS
-
-// turn on the aux LEDs while main LEDs are on
-// (in case there's a RGB button)
-#define USE_AUX_RGB_LEDS_WHILE_ON  40
-#define USE_INDICATOR_LED_WHILE_RAMPING
-
-// channel modes...
-// CM_MAIN2, CM_LED3, CM_LED4, CM_ALL,
-// CM_BLEND34A, CM_BLEND34B, CM_HSV, CM_AUTO3
-#define DEFAULT_CHANNEL_MODE           CM_ALL
-
-#define FACTORY_RESET_WARN_CHANNEL     CM_LED4
-#define FACTORY_RESET_SUCCESS_CHANNEL  CM_MAIN2
-
-#define CONFIG_WAITING_CHANNEL         CM_LED3
-#define CONFIG_BLINK_CHANNEL           CM_ALL
-
-// blink numbers on the main LEDs by default (but allow user to change it)
-#define DEFAULT_BLINK_CHANNEL          CM_MAIN2
-
-// LEDs 3 and 4 make a nice police strobe
-#define POLICE_COLOR_STROBE_CH1        CM_LED3
-#define POLICE_COLOR_STROBE_CH2        CM_LED4
-// aux red + aux blue are the correct colors, but are dim
-//#define POLICE_COLOR_STROBE_CH1        CM_AUXRED
-//#define POLICE_COLOR_STROBE_CH2        CM_AUXBLU
-
-// how much to increase total brightness at middle tint
-// (0 = 100% brightness, 64 = 200% brightness)
-#define TINT_RAMPING_CORRECTION 0  // none, linear regulator doesn't need it
-
-// main 2 LEDs
-//   output: unknown, 2000 lm?
-// LED 3 / 4
-//   output: unknown, 1000 lm each?
-#define RAMP_SIZE 150
-// delta-sigma modulated PWM (0b0HHHHHHHHLLLLLLL = 0, 8xHigh, 7xLow bits)
-// level_calc.py 5.01 1 150 7135 0 0.2 2000 --pwm 32640
-// (max is (255 << 7), because it's 8-bit PWM plus 7 bits of DSM)
-#define PWM1_LEVELS 0,1,2,3,4,5,6,7,9,10,12,14,17,19,22,25,28,32,36,41,45,50,56,62,69,76,84,92,101,110,121,132,143,156,169,184,199,215,232,251,270,291,313,336,360,386,414,442,473,505,539,574,612,651,693,736,782,829,880,932,987,1045,1105,1168,1233,1302,1374,1449,1527,1608,1693,1781,1873,1969,2068,2172,2279,2391,2507,2628,2753,2883,3018,3158,3303,3454,3609,3771,3938,4111,4289,4475,4666,4864,5068,5280,5498,5724,5957,6197,6445,6701,6965,7237,7518,7808,8106,8413,8730,9056,9392,9737,10093,10459,10835,11223,11621,12031,12452,12884,13329,13786,14255,14737,15232,15741,16262,16798,17347,17911,18489,19082,19691,20314,20954,21609,22281,22969,23674,24397,25137,25895,26671,27465,28279,29111,29963,30835,31727,32640
-
-#define MIN_THERM_STEPDOWN 50
-#define DEFAULT_LEVEL 70
-#define MAX_1x7135 70
-// always run at 1/4th speed, because 4 kHz PWM is enough for this circuit
-// and speed changes make a big visible bump
-#define HALFSPEED_LEVEL     255
-#define QUARTERSPEED_LEVEL  255
-
-#define RAMP_SMOOTH_FLOOR 1
-#define RAMP_SMOOTH_CEIL  130
-// 10, 30, 50, [70], 90, 110, 130
-#define RAMP_DISCRETE_FLOOR 10
-#define RAMP_DISCRETE_CEIL  RAMP_SMOOTH_CEIL
-#define RAMP_DISCRETE_STEPS 7
-
-// 10 40 [70] 100 130
-#define SIMPLE_UI_FLOOR RAMP_DISCRETE_FLOOR
-#define SIMPLE_UI_CEIL RAMP_DISCRETE_CEIL
-#define SIMPLE_UI_STEPS 5
-
-// stop panicking at ~1500 lm
-#define THERM_FASTER_LEVEL 130
-
-#define USE_POLICE_COLOR_STROBE_MODE
-#undef  TACTICAL_LEVELS
-#define TACTICAL_LEVELS 120,30,(RAMP_SIZE+3)  // high, low, police strobe
-
-// use the brightest setting for strobe
-#define STROBE_BRIGHTNESS MAX_LEVEL
-// slow down party strobe; this driver can't pulse for 1ms or less
-#define PARTY_STROBE_ONTIME 2
-// #define STROBE_OFF_LEVEL 1  // nope, this makes strobe blurry
-// bike strobe needs a longer pulse too?
-//#define BIKE_STROBE_ONTIME 8
-
-// the default of 26 looks a bit flat, so increase it
-#define CANDLE_AMPLITUDE 33
-
-// the power regulator is a bit slow, so push it harder for a quick response from off
-#define DEFAULT_JUMP_START_LEVEL 21
-#define BLINK_BRIGHTNESS 50
-#define BLINK_ONCE_TIME 12  // longer blink, since main LEDs are slow
-
-#define THERM_CAL_OFFSET 5
-
-// don't blink while ramping
-#ifdef BLINK_AT_RAMP_MIDDLE
-#undef BLINK_AT_RAMP_MIDDLE
-#endif
-
-// for consistency with KR4 (not otherwise necessary though)
-#define USE_SOFT_FACTORY_RESET
-