renamed cfg.h -> anduril.h so each UI can have its own cfg (part 1)

(still need to update file contents afterward,
 but doing it in a separate commit so git can detect renames easier)

1 files changed, 0 insertions, 88 deletions

diff --git a/hw/hank/noctigon-dm11/cfg.h b/hw/hank/noctigon-dm11/cfg.h
deleted file mode 100644
index 7782762..0000000
--- a/hw/hank/noctigon-dm11/cfg.h
+++ /dev/null
@@ -1,88 +0,0 @@
-// Noctigon DM11 config options for Anduril
-// Copyright (C) 2021-2023 Selene ToyKeeper
-// SPDX-License-Identifier: GPL-3.0-or-later
-#pragma once
-
-#define MODEL_NUMBER "0271"
-#include "hank/noctigon-dm11/hwdef.h"
-#include "hank/cfg.h"
-// ATTINY: 1634
-
-// this light has three aux LED channels: R, G, B
-#define USE_AUX_RGB_LEDS
-// ... and a single LED in the button
-#define USE_BUTTON_LED
-// don't use aux LEDs while main LED is on
-#ifdef USE_INDICATOR_LED_WHILE_RAMPING
-#undef USE_INDICATOR_LED_WHILE_RAMPING
-#endif
-
-#define RAMP_SIZE 150
-
-// power channels:
-// - linear: 5A?
-// - FET: DD
-
-// maxreg at 130, dynamic PWM: level_calc.py 5.01 2 149 7135 1 0.3 1740 FET 1 10 3190 --pwm dyn:64:16384:255
-// (plus one extra level at the beginning for moon)
-#define PWM1_LEVELS  0,1,1,2,2,3,4,5,6,7,8,9,11,12,14,16,17,19,22,24,26,29,31,34,37,40,43,46,49,53,56,60,63,67,71,74,78,82,86,89,93,96,99,103,105,108,110,112,114,115,116,116,115,114,112,109,106,101,95,89,81,71,60,48,34,19,20,21,22,23,24,26,27,28,30,31,32,34,36,37,39,41,43,45,47,49,51,53,56,58,61,63,66,69,72,75,78,81,84,88,91,95,99,103,107,111,115,119,124,129,133,138,143,149,154,159,165,171,177,183,189,196,203,210,217,224,231,239,247,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0
-#define PWM2_LEVELS  0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,9,20,30,41,52,63,75,87,99,112,125,138,151,165,179,194,208,224,239,255
-#define PWM_TOPS     16383,16383,11750,14690,9183,12439,13615,13955,13877,13560,13093,12529,13291,12513,12756,12769,11893,11747,12085,11725,11329,11316,10851,10713,10518,10282,10016,9729,9428,9298,8971,8794,8459,8257,8043,7715,7497,7275,7052,6753,6538,6260,5994,5798,5501,5271,5006,4758,4525,4268,4030,3775,3508,3263,3010,2752,2517,2256,1998,1763,1512,1249,994,749,497,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255
-#define MIN_THERM_STEPDOWN 66  // should be above highest dyn_pwm level
-
-#define MAX_1x7135 130
-#define DEFAULT_LEVEL 70
-#define HALFSPEED_LEVEL 12
-#define QUARTERSPEED_LEVEL 4
-
-#define RAMP_SMOOTH_FLOOR 10  // low levels may be unreliable
-#define RAMP_SMOOTH_CEIL  130
-// 10, 30, 50, [70], 90, 110, 130
-#define RAMP_DISCRETE_FLOOR 10
-#define RAMP_DISCRETE_CEIL  RAMP_SMOOTH_CEIL
-#define RAMP_DISCRETE_STEPS 7
-
-// safe limit ~75% power
-#define SIMPLE_UI_FLOOR RAMP_DISCRETE_FLOOR
-#define SIMPLE_UI_CEIL RAMP_DISCRETE_CEIL
-#define SIMPLE_UI_STEPS 5
-
-// stop panicking at ~70% power or ~600 lm
-#define THERM_FASTER_LEVEL 130
-
-#define THERM_CAL_OFFSET 5
-
-
-// the power regulator is a bit slow, so push it harder for a quick response from off
-#define DEFAULT_JUMP_START_LEVEL 21
-#define BLINK_BRIGHTNESS 50
-#define BLINK_ONCE_TIME 12
-
-// show each channel while it scroll by in the menu
-#define USE_CONFIG_COLORS
-
-// there is usually no lighted button, so
-// blink numbers on the main LEDs by default (but allow user to change it)
-#define DEFAULT_BLINK_CHANNEL  CM_MAIN
-
-// slow down party strobe; this driver can't pulse for 1ms or less
-// (only needed on no-FET build)
-//#define PARTY_STROBE_ONTIME 2
-
-// use aux red + aux blue for police strobe
-#define USE_POLICE_COLOR_STROBE_MODE
-#define POLICE_STROBE_USES_AUX
-#define POLICE_COLOR_STROBE_CH1        CM_AUXRED
-#define POLICE_COLOR_STROBE_CH2        CM_AUXBLU
-
-// make candle mode wobble more
-#define CANDLE_AMPLITUDE 30
-
-// don't blink while ramping
-#ifdef BLINK_AT_RAMP_MIDDLE
-#undef BLINK_AT_RAMP_MIDDLE
-#endif
-
-// added for convenience
-#define USE_SOFT_FACTORY_RESET
-