renamed cfg.h -> anduril.h so each UI can have its own cfg (part 1)

(still need to update file contents afterward,
 but doing it in a separate commit so git can detect renames easier)

1 files changed, 0 insertions, 83 deletions

diff --git a/hw/hank/noctigon-k1/cfg.h b/hw/hank/noctigon-k1/cfg.h
deleted file mode 100644
index f02e4ef..0000000
--- a/hw/hank/noctigon-k1/cfg.h
+++ /dev/null
@@ -1,83 +0,0 @@
-// Noctigon K1 config options for Anduril
-// Copyright (C) 2019-2023 Selene ToyKeeper
-// SPDX-License-Identifier: GPL-3.0-or-later
-#pragma once
-
-#define MODEL_NUMBER "0251"
-// (originally known as Emisar D1S v2)
-#include "hank/noctigon-k1/hwdef.h"
-#include "hank/cfg.h"
-// ATTINY: 1634
-
-// this light can safely run a bit hotter than most
-#undef DEFAULT_THERM_CEIL
-#define DEFAULT_THERM_CEIL 55
-
-// this light has three aux LED channels: R, G, B
-#define USE_AUX_RGB_LEDS
-#define USE_AUX_RGB_LEDS_WHILE_ON  5
-#define USE_INDICATOR_LED_WHILE_RAMPING
-
-
-#define RAMP_SIZE 150
-
-// ../../bin/level_calc.py cube 1 150 7135 1 4 1300
-// (with max_pwm set to 1023)
-// (level 0 flickers and isn't relevant on a thrower, so it's omitted)
-#define RAMP_LENGTH 150
-#define PWM1_LEVELS 1,1,2,2,3,3,4,4,5,6,6,7,8,9,10,11,12,13,14,15,16,17,18,20,21,23,24,26,27,29,31,32,34,36,38,40,43,45,47,49,52,54,57,60,62,65,68,71,74,77,81,84,87,91,95,98,102,106,110,114,118,122,127,131,136,141,145,150,155,160,166,171,176,182,188,193,199,205,211,218,224,231,237,244,251,258,265,272,280,287,295,303,310,319,327,335,344,352,361,370,379,388,397,407,416,426,436,446,457,467,477,488,499,510,521,533,544,556,568,580,592,604,617,629,642,655,668,682,695,709,723,737,751,766,781,795,810,826,841,857,872,888,904,921,937,954,971,988,1005,1023
-
-#define MAX_1x7135 50
-#define DEFAULT_LEVEL 50
-#define MIN_THERM_STEPDOWN 50  // should be above highest dyn_pwm level
-//#define HALFSPEED_LEVEL 12
-//#define QUARTERSPEED_LEVEL 4
-// don't slow down at low levels; this isn't that sort of light
-// (it needs to stay at full speed for the 10-bit PWM to work)
-#ifdef USE_DYNAMIC_UNDERCLOCKING
-#undef USE_DYNAMIC_UNDERCLOCKING
-#endif
-
-#define RAMP_SMOOTH_FLOOR 1
-#define RAMP_SMOOTH_CEIL  130
-// 10, 30, [50], 70, 90, 110, 130
-#define RAMP_DISCRETE_FLOOR 10
-#define RAMP_DISCRETE_CEIL  RAMP_SMOOTH_CEIL
-#define RAMP_DISCRETE_STEPS 7
-
-// safe limit ~75% power
-#define SIMPLE_UI_FLOOR RAMP_DISCRETE_FLOOR
-#define SIMPLE_UI_CEIL RAMP_DISCRETE_CEIL
-#define SIMPLE_UI_STEPS 5
-
-// stop panicking at ~70% power or ~600 lm
-#define THERM_FASTER_LEVEL 130
-
-#define THERM_CAL_OFFSET 5
-
-#define THERM_RESPONSE_MAGNITUDE 32  // smaller adjustments, this host changes temperature slowly
-#define THERM_NEXT_WARNING_THRESHOLD 32  // more error tolerance before adjusting
-
-// the power regulator is a bit slow, so push it harder for a quick response from off
-#define DEFAULT_JUMP_START_LEVEL 10
-#define BLINK_BRIGHTNESS DEFAULT_LEVEL
-#define BLINK_ONCE_TIME 12
-
-// show each channel while it scroll by in the menu
-#define USE_CONFIG_COLORS
-
-// there is usually no lighted button,
-// so blink numbers on the main LEDs by default (but allow user to change it)
-#define DEFAULT_BLINK_CHANNEL  CM_MAIN
-
-// slow down party strobe; this driver can't pulse for 1ms or less
-#define PARTY_STROBE_ONTIME 2
-
-// make candle mode wobble more
-#define CANDLE_AMPLITUDE 32
-
-// don't blink while ramping; the entire ramp is regulated
-#ifdef BLINK_AT_RAMP_MIDDLE
-#undef BLINK_AT_RAMP_MIDDLE
-#endif
-