moved variant builds under their parent, like "d4-219" -> "d4/219"

1 files changed, 0 insertions, 47 deletions

diff --git a/hw/hank/noctigon-kr4-2ch/hwdef.h b/hw/hank/noctigon-kr4-2ch/hwdef.h
deleted file mode 100644
index 081fccc..0000000
--- a/hw/hank/noctigon-kr4-2ch/hwdef.h
+++ /dev/null
@@ -1,47 +0,0 @@
-// Noctigon KR4 w/ tint ramping
-// Copyright (C) 2021-2023 Selene ToyKeeper
-// SPDX-License-Identifier: GPL-3.0-or-later
-#pragma once
-
-/*
- * (same driver as emisar-2ch, but with the switch on a different pin)
- *
- * Pin / Name / Function
- *   1    PA6   2nd LED PWM (linear) (PWM1B)
- *   2    PA5   R: red aux LED (PWM0B)
- *   3    PA4   G: green aux LED
- *   4    PA3   B: blue aux LED
- *   5    PA2   button LED
- *   6    PA1   Opamp 2 enable (2nd LEDs)
- *   7    PA0   Opamp 1 enable (main LEDs)
- *   8    GND   GND
- *   9    VCC   VCC
- *  10    PC5   (none)
- *  11    PC4   (none)
- *  12    PC3   RESET
- *  13    PC2   (none)
- *  14    PC1   SCK
- *  15    PC0   main LED PWM (FET) (PWM0A) (unused on some models because tint ramping)
- *  16    PB3   main LED PWM (linear) (PWM1A)
- *  17    PB2   MISO / e-switch (PCINT10)
- *  18    PB1   MOSI / battery voltage (ADC6)
- *  19    PB0   (none)
- *  20    PA7   (none)
- *      ADC12   thermal sensor
- */
-
-#define ATTINY 1634
-#include <avr/io.h>
-
-// move the switch to a different pin
-#define SWITCH_PIN   PB2     // pin 17
-#define SWITCH_PCINT PCINT10 // pin 17 pin change interrupt
-#define SWITCH_PCIE  PCIE1   // PCIE1 is for PCINT[11:8]
-#define SWITCH_PCMSK PCMSK1  // PCMSK1 is for PCINT[11:8]
-#define SWITCH_PORT  PINB    // PINA or PINB or PINC
-#define SWITCH_PUE   PUEB    // pullup group B
-#define PCINT_vect   PCINT1_vect  // ISR for PCINT[11:8]
-
-// the rest of the config is the same as the generic Emisar 2ch build
-#include "hank/emisar-2ch/hwdef.h"
-