renamed cfg.h -> anduril.h so each UI can have its own cfg (part 1)

(still need to update file contents afterward,
 but doing it in a separate commit so git can detect renames easier)

1 files changed, 0 insertions, 134 deletions

diff --git a/hw/hank/noctigon-m44/cfg.h b/hw/hank/noctigon-m44/cfg.h
deleted file mode 100644
index 3e80f66..0000000
--- a/hw/hank/noctigon-m44/cfg.h
+++ /dev/null
@@ -1,134 +0,0 @@
-// Noctigon M44 config options for Anduril
-// Copyright (C) 2023 Selene ToyKeeper
-// SPDX-License-Identifier: GPL-3.0-or-later
-#pragma once
-
-#define MODEL_NUMBER "0143"
-#include "hank/noctigon-m44/hwdef.h"
-#include "hank/cfg.h"
-// ATTINY: 1634
-
-// this light has three aux LED channels: R, G, B
-#define USE_AUX_RGB_LEDS
-// the aux LEDs are front-facing, so turn them off while main LEDs are on
-// it also has an independent LED in the button
-#define USE_BUTTON_LED
-// TODO: the whole "indicator LED" thing needs to be refactored into
-//       "aux LED(s)" and "button LED(s)" since they work a bit differently
-// enabling this option breaks the button LED on D4v2.5
-#ifdef USE_INDICATOR_LED_WHILE_RAMPING
-#undef USE_INDICATOR_LED_WHILE_RAMPING
-#endif
-
-// channel modes...
-// CM_CH1, CM_CH2, CM_BOTH, CM_BLEND, CM_AUTO
-// enable max brightness out of the box
-#define DEFAULT_CHANNEL_MODE           CM_BOTH
-
-//#define FACTORY_RESET_WARN_CHANNEL     CM_CH2
-//#define FACTORY_RESET_SUCCESS_CHANNEL  CM_BOTH
-
-#define USE_CONFIG_COLORS
-//#define CONFIG_WAITING_CHANNEL         CM_CH2
-//#define CONFIG_BLINK_CHANNEL           CM_BOTH
-
-// blink numbers on the main LEDs by default (but allow user to change it)
-#define DEFAULT_BLINK_CHANNEL  CM_BOTH
-
-#define POLICE_COLOR_STROBE_CH1        CM_CH1
-#define POLICE_COLOR_STROBE_CH2        CM_CH2
-// aux red + aux blue are the correct colors, but are dim
-//#define POLICE_COLOR_STROBE_CH1        CM_AUXRED
-//#define POLICE_COLOR_STROBE_CH2        CM_AUXBLU
-
-// how much to increase total brightness at middle tint
-// (0 = 100% brightness, 64 = 200% brightness)
-#define TINT_RAMPING_CORRECTION 0  // none, linear regulator doesn't need it
-
-// channel 1
-//   output: unknown, 6000 lm?
-// channel 2
-//   output: unknown, 6000 lm?
-#define RAMP_SIZE 150
-#if 0  // optimized hand-tweaked ramp from before PWM+DSM update
-// "100% power" ramp
-// level_calc.py 5.01 1 150 7135 0 2.0 5000 --pwm dyn:64:16384:511:5
-// (with manual tweaks)
-#define PWM1_LEVELS 0,1,1,2,2,3,4,5,6,6,7,7,7,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,9,9,9,9,9,9,10,10,11,11,12,12,13,14,15,16,17,18,19,20,21,22,23,24,26,27,28,29,31,32,34,35,37,39,40,42,44,46,48,50,52,54,57,59,62,64,67,69,72,75,78,81,84,87,91,94,98,101,105,109,113,117,121,126,130,135,140,145,150,155,160,165,171,177,183,189,195,201,208,214,221,228,236,243,251,258,266,274,283,291,300,309,318,328,337,347,357,368,378,389,400,411,423,435,447,459,472,484,498,511
-#define PWM_TOPS 16383,16383,10002,11695,8083,9374,9793,7993,8291,7017,7180,6235,5431,5556,4927,4385,3916,3511,3159,2852,2585,2349,2142,1958,1795,1648,1517,1398,1290,1193,1104,1023,950,883,822,765,714,667,623,582,632,610,588,566,544,512,535,505,523,494,509,480,492,502,509,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511
-// max "200% power" ramp and tops
-// 1-130: 0 to 100% power
-// level_calc.py 5.01 1 130 7135 2 0.2 2000 --pwm dyn:64:16383:511
-// 131 to 150: 101% to 200% power
-// level_calc.py 6.44 1 150 7135 1 0.2 2000 --pwm dyn:74:16383:1022
-//#define PWM2_LEVELS 2,2,2,3,3,4,4,5,6,7,8,9,10,11,13,14,16,17,19,21,23,25,28,30,33,35,38,41,44,47,50,54,57,60,64,67,71,74,78,81,84,88,91,94,97,99,101,103,105,106,107,107,107,106,105,102,99,95,90,84,77,68,58,47,34,36,38,40,42,44,47,49,52,54,57,60,63,66,69,73,76,80,83,87,91,96,100,104,109,114,119,124,130,135,141,147,153,160,166,173,180,187,195,203,211,219,228,236,245,255,264,274,285,295,306,317,329,340,353,365,378,391,405,419,433,448,463,479,495,511,530,550,570,591,612,634,657,680,705,730,755,782,809,837,865,895,925,957,989,1022
-//#define PWM3_LEVELS 16383,13234,9781,13826,9593,13434,9973,12021,12900,13193,13150,12899,12508,12023,12666,11982,12181,11422,11393,11247,11018,10731,10826,10434,10365,9927,9767,9565,9332,9076,8806,8693,8395,8096,7928,7626,7439,7143,6948,6665,6393,6203,5946,5700,5465,5187,4926,4681,4451,4195,3957,3700,3463,3213,2983,2718,2476,2231,1986,1742,1501,1245,997,756,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511
-#define MIN_THERM_STEPDOWN 65  // should be above highest dyn_pwm level
-#define DEFAULT_LEVEL 70
-#define MAX_1x7135 150
-#define HALFSPEED_LEVEL 10
-#define QUARTERSPEED_LEVEL 2
-#endif  // end old ramp config
-
-// delta-sigma modulated PWM (0b0HHHHHHHHLLLLLLL = 0, 8xHigh, 7xLow bits)
-// level_calc.py 5.01 1 150 7135 0 0.2 2000 --pwm 32640
-// (max is (255 << 7), because it's 8-bit PWM plus 7 bits of DSM)
-#define PWM1_LEVELS 0,1,2,3,4,5,6,7,9,10,12,14,17,19,22,25,28,32,36,41,45,50,56,62,69,76,84,92,101,110,121,132,143,156,169,184,199,215,232,251,270,291,313,336,360,386,414,442,473,505,539,574,612,651,693,736,782,829,880,932,987,1045,1105,1168,1233,1302,1374,1449,1527,1608,1693,1781,1873,1969,2068,2172,2279,2391,2507,2628,2753,2883,3018,3158,3303,3454,3609,3771,3938,4111,4289,4475,4666,4864,5068,5280,5498,5724,5957,6197,6445,6701,6965,7237,7518,7808,8106,8413,8730,9056,9392,9737,10093,10459,10835,11223,11621,12031,12452,12884,13329,13786,14255,14737,15232,15741,16262,16798,17347,17911,18489,19082,19691,20314,20954,21609,22281,22969,23674,24397,25137,25895,26671,27465,28279,29111,29963,30835,31727,32640
-
-#define MIN_THERM_STEPDOWN 50
-#define DEFAULT_LEVEL 70
-#define MAX_1x7135 150
-// always run at 1/4th speed, because 4 kHz PWM is enough for this circuit
-// and speed changes make a big visible bump
-#define HALFSPEED_LEVEL     255
-#define QUARTERSPEED_LEVEL  255
-
-#define RAMP_SMOOTH_FLOOR 1
-#define RAMP_SMOOTH_CEIL  130
-// 10, 30, 50, [70], 90, 110, 130
-#define RAMP_DISCRETE_FLOOR 10
-#define RAMP_DISCRETE_CEIL  RAMP_SMOOTH_CEIL
-#define RAMP_DISCRETE_STEPS 7
-
-// 10 40 [70] 100 130
-#define SIMPLE_UI_FLOOR RAMP_DISCRETE_FLOOR
-#define SIMPLE_UI_CEIL RAMP_DISCRETE_CEIL
-#define SIMPLE_UI_STEPS 5
-
-// stop panicking at ~???? lm
-#define THERM_FASTER_LEVEL 130
-
-#define USE_POLICE_COLOR_STROBE_MODE
-#undef  TACTICAL_LEVELS
-#define TACTICAL_LEVELS 120,30,(RAMP_SIZE+3)  // high, low, police strobe
-
-// use the brightest setting for strobe
-#define STROBE_BRIGHTNESS MAX_LEVEL
-// slow down party strobe; this driver takes a while to start making any light
-#define PARTY_STROBE_ONTIME  12
-//#define STROBE_OFF_LEVEL 1  // nope, this makes strobe blurry
-// bike strobe needs a longer pulse too?  nope
-#define BIKE_STROBE_ONTIME 8
-
-// the default of 26 looks a bit flat, so increase it
-#define CANDLE_AMPLITUDE 33
-
-// party strobe, tac strobe, police, lightning, candle, bike
-#define DEFAULT_STROBE_CHANNELS  CM_BOTH,CM_BOTH,CM_BOTH,CM_AUTO,CM_AUTO,CM_AUTO
-
-// the power regulator is a bit slow, so push it harder for a quick response from off
-//#define DEFAULT_JUMP_START_LEVEL 50
-//#define JUMP_START_TIME 50
-#define BLINK_BRIGHTNESS 30
-#define BLINK_ONCE_TIME 16  // longer blink, since the boost driver is slow
-
-#define THERM_CAL_OFFSET 5
-
-// don't blink while ramping
-#ifdef BLINK_AT_RAMP_MIDDLE
-#undef BLINK_AT_RAMP_MIDDLE
-#endif
-
-// for consistency with KR4 (not otherwise necessary though)
-#define USE_SOFT_FACTORY_RESET
-