diff options
| author | Selene ToyKeeper | 2024-03-04 04:42:09 -0700 |
|---|---|---|
| committer | Selene ToyKeeper | 2024-03-04 04:42:09 -0700 |
| commit | 984758be300392d8390c9407b8c58a01f945653a (patch) | |
| tree | a5087c862d40e4c23976dfe6c9a263d2623f7b39 /hw/lumintop | |
| parent | Merge branch 'trunk' into emisar-d3aa (diff) | |
| parent | enabled eeprom read/write stabilization by default on recent MCUs, (diff) | |
| download | anduril-984758be300392d8390c9407b8c58a01f945653a.tar.gz anduril-984758be300392d8390c9407b8c58a01f945653a.tar.bz2 anduril-984758be300392d8390c9407b8c58a01f945653a.zip | |
Merge branch 'trunk' into emisar-d3aa
* trunk:
enabled eeprom read/write stabilization by default on recent MCUs, to prevent corrupt data
thefreeman-avr32dd20-devkit: enable boost bypass at boot, so AA/NiMH can boot
avr32dd20-devkit: use unimplemented "CH" pin as a boost bypass control
added "emisar-2ch-fet-joined" build, for D4S w/ lighted switch
documented FW3X swapped pins better
documented Wurkkos TS25/TS11/FC13 distinctions
build.sh: don't require DFPs, newer avr-libc doesn't need them
use BLIP_LEVEL instead of 0 for "blip"s
clarified which-hex-file.md a bit; make sure the model number matches
fw3x: reduced pulsing on low modes
Diffstat (limited to 'hw/lumintop')
| -rw-r--r-- | hw/lumintop/fw3x-lume1/README.md | 10 | ||||
| -rw-r--r-- | hw/lumintop/fw3x-lume1/anduril.h | 4 |
2 files changed, 9 insertions, 5 deletions
diff --git a/hw/lumintop/fw3x-lume1/README.md b/hw/lumintop/fw3x-lume1/README.md index 190cd0e..d155eba 100644 --- a/hw/lumintop/fw3x-lume1/README.md +++ b/hw/lumintop/fw3x-lume1/README.md @@ -6,9 +6,10 @@ sensor. ## Notes of interest -**Flashing firmware**: The MOSI and MISO pin are swapped, compared to a Hanklight. -LoneOceans sent a fixed driver design to Lumintop, but the new design didn't -get produced. So to flash firmware, swap the wires for those two pins first. +**Flashing firmware**: The MOSI and MISO pin are swapped on PCBs dated 01/20, +compared to a Hanklight. LoneOceans sent a fixed driver design (dated 06/20) +to Lumintop, but the new design didn't get produced. So to flash firmware, +swap the wires for those two pins first. **Fuses**: Lumintop seems to have shipped the FW3X with the wrong fuse values, so it has the MCU severely underclocked and everything runs much slower than it @@ -29,3 +30,6 @@ output is unstable so there is very visible ripple. The user can either raise the ramp floor to a level high enough to avoid these issues, or learn to live with the ripple and preflash. +LoneOceans has some extra notes here, which mostly apply only to older versions +of the code: https://budgetlightforum.com/t/anduril-2/62656/531 + diff --git a/hw/lumintop/fw3x-lume1/anduril.h b/hw/lumintop/fw3x-lume1/anduril.h index cd06c6a..852e1c4 100644 --- a/hw/lumintop/fw3x-lume1/anduril.h +++ b/hw/lumintop/fw3x-lume1/anduril.h @@ -34,8 +34,8 @@ #define DEFAULT_LEVEL 56 #define MAX_1x7135 149 #define MIN_THERM_STEPDOWN 50 -#define HALFSPEED_LEVEL 21 -#define QUARTERSPEED_LEVEL 11 +#define HALFSPEED_LEVEL 11 +#define QUARTERSPEED_LEVEL 2 #define RAMP_SMOOTH_FLOOR 1 #define RAMP_SMOOTH_CEIL 149 |