diff options
| author | Selene ToyKeeper | 2024-03-04 04:42:09 -0700 |
|---|---|---|
| committer | Selene ToyKeeper | 2024-03-04 04:42:09 -0700 |
| commit | 984758be300392d8390c9407b8c58a01f945653a (patch) | |
| tree | a5087c862d40e4c23976dfe6c9a263d2623f7b39 /hw/thefreeman/avr32dd20-devkit/anduril.h | |
| parent | Merge branch 'trunk' into emisar-d3aa (diff) | |
| parent | enabled eeprom read/write stabilization by default on recent MCUs, (diff) | |
| download | anduril-984758be300392d8390c9407b8c58a01f945653a.tar.gz anduril-984758be300392d8390c9407b8c58a01f945653a.tar.bz2 anduril-984758be300392d8390c9407b8c58a01f945653a.zip | |
Merge branch 'trunk' into emisar-d3aa
* trunk:
enabled eeprom read/write stabilization by default on recent MCUs, to prevent corrupt data
thefreeman-avr32dd20-devkit: enable boost bypass at boot, so AA/NiMH can boot
avr32dd20-devkit: use unimplemented "CH" pin as a boost bypass control
added "emisar-2ch-fet-joined" build, for D4S w/ lighted switch
documented FW3X swapped pins better
documented Wurkkos TS25/TS11/FC13 distinctions
build.sh: don't require DFPs, newer avr-libc doesn't need them
use BLIP_LEVEL instead of 0 for "blip"s
clarified which-hex-file.md a bit; make sure the model number matches
fw3x: reduced pulsing on low modes
Diffstat (limited to 'hw/thefreeman/avr32dd20-devkit/anduril.h')
| -rw-r--r-- | hw/thefreeman/avr32dd20-devkit/anduril.h | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/hw/thefreeman/avr32dd20-devkit/anduril.h b/hw/thefreeman/avr32dd20-devkit/anduril.h index 02d5de3..3152183 100644 --- a/hw/thefreeman/avr32dd20-devkit/anduril.h +++ b/hw/thefreeman/avr32dd20-devkit/anduril.h @@ -110,6 +110,7 @@ #define PARTY_STROBE_ONTIME 1 // slow down party strobe #define STROBE_OFF_LEVEL 1 // keep the regulator chip on between pulses +#define BLIP_LEVEL 1 // same // smoother candle mode with bigger oscillations #define CANDLE_AMPLITUDE 40 |