reorganized project files (part 1)

(just moved files, didn't change the contents yet,
 and nothing will work without updating #includes and build scripts and stuff)

1 files changed, 119 insertions, 0 deletions

diff --git a/hw/thefreeman/boost21-mp3431-hdr-dac-argb/cfg.h b/hw/thefreeman/boost21-mp3431-hdr-dac-argb/cfg.h
new file mode 100644
index 0000000..66cc2d0
--- /dev/null
+++ b/hw/thefreeman/boost21-mp3431-hdr-dac-argb/cfg.h
@@ -0,0 +1,119 @@
+// thefreeman's BST21 BST20-FWxA (no button LED)
+// Copyright (C) 2023 TBD (thefreeman), Selene ToyKeeper
+// SPDX-License-Identifier: GPL-3.0-or-later
+#pragma once
+
+#define MODEL_NUMBER "1631"
+#include "hwdef-thefreeman-boost21-mp3431-hdr-dac-argb.h"
+// ATTINY: 1616
+
+// HPRsense : 1.7+0.3+5 = 7mR (DMN22M5UFG+trace resistance+5mR)
+// Vsense=42.46mV, R1= 191k
+// LPRsense : 1R
+// transition DAC level 8, ramp level 45
+// fifth power ramp 0.1mA to 6066mA
+
+#define RAMP_SIZE 150
+
+// 4 ramp segments:
+//   - low 0.55V
+//   - low 2.5V
+//   - high 0.55V
+//   - high 2.5V
+// PWM1: DAC Data
+#define PWM1_LEVELS  2,  3,  4,  5,  7,  9, 11, 13, 16, 19, 23, 28, 33, 39, 45, 53, 61, 71, 81, 93,106,121,137,155,175,196,220,246, \
+                    60, 67, 74, 82, 91,100,110,121,133,146,159,174,190,207,224,244, \
+                     8,  9,  9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 20, 21, 23, 24, 26, 27, 29, 31, 33, 35, 37, 40, 42, 45, 47, 50, 53, 56, 59, 62, 66, 69, 73, 77, 81, 85, 90, 94, 99,104,109,114,120,126,132,138,144,151,158,165,173,180,188,196,205,214,223,232,242,252, \
+                    57, 60, 62, 65, 67, 70, 73, 76, 78, 82, 85, 88, 91, 95, 98,102,105,109,113,117,121,126,130,135,139,144,149,154,159,164,170,175,181,187,193,199,206,212,219,225,232,240,247,255
+// PWM Tops: VREF selector (0.55V=16,1.1V=17, 2.5V=18, 4.3V=19, 1.5V=20)
+#define PWM_TOPS    16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, \
+                    18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, \
+                    16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, \
+                    18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18
+
+#define MAX_1x7135           44
+#define DEFAULT_LEVEL        44
+#define HDR_ENABLE_LEVEL_MIN 45 // when HDR FET turns ON
+
+// no PWM, so MCU clock speed can be slow
+#define HALFSPEED_LEVEL      41
+#define QUARTERSPEED_LEVEL   40  // seems to run fine at 10kHz/4, try reducing more
+
+#define RAMP_SMOOTH_FLOOR    1
+#define RAMP_SMOOTH_CEIL     130  // 50% / 3A / 1000 lm
+// 1 22 [44] 65 87 108 130
+#define RAMP_DISCRETE_FLOOR  1
+#define RAMP_DISCRETE_CEIL   130
+#define RAMP_DISCRETE_STEPS  7
+
+// 20 [45] 70 95 120
+#define SIMPLE_UI_FLOOR      20
+#define SIMPLE_UI_CEIL       120  // ~2.25A / ~750 lm
+#define SIMPLE_UI_STEPS      5
+
+// don't blink mid-ramp
+#ifdef BLINK_AT_RAMP_MIDDLE
+#undef BLINK_AT_RAMP_MIDDLE
+#endif
+
+// thermal config
+
+// temperature limit
+#define THERM_FASTER_LEVEL  130 // stop panicking at 50%/3A
+#define MIN_THERM_STEPDOWN  MAX_1x7135
+
+//#define THERM_LOOKAHEAD 4 // 4 by default -> decrease for longer turbo
+#define THERM_NEXT_WARNING_THRESHOLD 48 // 24 by default -> increase for fewer adjustments (more stable output on large time scale)
+#define THERM_RESPONSE_MAGNITUDE 32 // 64 by default -> decrease for smaller adjustments (removes dip post turbo)
+//#define THERM_WINDOW_SIZE 1 // 2 by default -> decrease for tighter temperature regulation
+
+
+// UI
+
+//#define SIMPLE_UI_ACTIVE 0 // advanced UI by default
+
+// allow Aux Config and Strobe Modes in Simple UI
+#define USE_EXTENDED_SIMPLE_UI
+
+// Allow 3C in Simple UI for switching between smooth and stepped ramping
+#define USE_SIMPLE_UI_RAMPING_TOGGLE
+
+#define DEFAULT_2C_STYLE 1 // enable 2 click turbo
+
+
+// AUX
+
+//#define USE_BUTTON_LED
+
+// this light has three aux LED channels: R, G, B
+#define USE_AUX_RGB_LEDS
+
+// show each channel while it scroll by in the menu
+#define USE_CONFIG_COLORS
+
+// blink numbers on the main LEDs by default
+#define DEFAULT_BLINK_CHANNEL  CM_MAIN
+
+// use aux red + aux blue for police strobe
+#define USE_POLICE_COLOR_STROBE_MODE
+#define POLICE_STROBE_USES_AUX
+#define POLICE_COLOR_STROBE_CH1        CM_AUXRED
+#define POLICE_COLOR_STROBE_CH2        CM_AUXBLU
+
+// the aux LEDs are front-facing, so turn them off while main LEDs are on
+#ifdef USE_INDICATOR_LED_WHILE_RAMPING
+#undef USE_INDICATOR_LED_WHILE_RAMPING
+#endif
+
+
+// Misc
+
+#define PARTY_STROBE_ONTIME 1  // slow down party strobe
+#define STROBE_OFF_LEVEL 1  // keep the regulator chip on between pulses
+
+// smoother candle mode with bigger oscillations
+#define CANDLE_AMPLITUDE 40
+
+// enable 13H factory reset so it can be used on tail e-switch lights
+#define USE_SOFT_FACTORY_RESET
+