renamed cfg.h -> anduril.h so each UI can have its own cfg (part 1)

(still need to update file contents afterward,
 but doing it in a separate commit so git can detect renames easier)

1 files changed, 0 insertions, 119 deletions

diff --git a/hw/thefreeman/boost21-mp3431-hdr-dac-argb/cfg.h b/hw/thefreeman/boost21-mp3431-hdr-dac-argb/cfg.h
deleted file mode 100644
index 2ed8fae..0000000
--- a/hw/thefreeman/boost21-mp3431-hdr-dac-argb/cfg.h
+++ /dev/null
@@ -1,119 +0,0 @@
-// thefreeman's BST21 BST20-FWxA (no button LED)
-// Copyright (C) 2023 TBD (thefreeman), Selene ToyKeeper
-// SPDX-License-Identifier: GPL-3.0-or-later
-#pragma once
-
-#define MODEL_NUMBER "1631"
-#include "thefreeman/boost21-mp3431-hdr-dac-argb/hwdef.h"
-// ATTINY: 1616
-
-// HPRsense : 1.7+0.3+5 = 7mR (DMN22M5UFG+trace resistance+5mR)
-// Vsense=42.46mV, R1= 191k
-// LPRsense : 1R
-// transition DAC level 8, ramp level 45
-// fifth power ramp 0.1mA to 6066mA
-
-#define RAMP_SIZE 150
-
-// 4 ramp segments:
-//   - low 0.55V
-//   - low 2.5V
-//   - high 0.55V
-//   - high 2.5V
-// PWM1: DAC Data
-#define PWM1_LEVELS  2,  3,  4,  5,  7,  9, 11, 13, 16, 19, 23, 28, 33, 39, 45, 53, 61, 71, 81, 93,106,121,137,155,175,196,220,246, \
-                    60, 67, 74, 82, 91,100,110,121,133,146,159,174,190,207,224,244, \
-                     8,  9,  9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 20, 21, 23, 24, 26, 27, 29, 31, 33, 35, 37, 40, 42, 45, 47, 50, 53, 56, 59, 62, 66, 69, 73, 77, 81, 85, 90, 94, 99,104,109,114,120,126,132,138,144,151,158,165,173,180,188,196,205,214,223,232,242,252, \
-                    57, 60, 62, 65, 67, 70, 73, 76, 78, 82, 85, 88, 91, 95, 98,102,105,109,113,117,121,126,130,135,139,144,149,154,159,164,170,175,181,187,193,199,206,212,219,225,232,240,247,255
-// PWM Tops: VREF selector (0.55V=16,1.1V=17, 2.5V=18, 4.3V=19, 1.5V=20)
-#define PWM_TOPS    16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, \
-                    18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, \
-                    16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, \
-                    18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18
-
-#define MAX_1x7135           44
-#define DEFAULT_LEVEL        44
-#define HDR_ENABLE_LEVEL_MIN 45 // when HDR FET turns ON
-
-// no PWM, so MCU clock speed can be slow
-#define HALFSPEED_LEVEL      41
-#define QUARTERSPEED_LEVEL   40  // seems to run fine at 10kHz/4, try reducing more
-
-#define RAMP_SMOOTH_FLOOR    1
-#define RAMP_SMOOTH_CEIL     130  // 50% / 3A / 1000 lm
-// 1 22 [44] 65 87 108 130
-#define RAMP_DISCRETE_FLOOR  1
-#define RAMP_DISCRETE_CEIL   130
-#define RAMP_DISCRETE_STEPS  7
-
-// 20 [45] 70 95 120
-#define SIMPLE_UI_FLOOR      20
-#define SIMPLE_UI_CEIL       120  // ~2.25A / ~750 lm
-#define SIMPLE_UI_STEPS      5
-
-// don't blink mid-ramp
-#ifdef BLINK_AT_RAMP_MIDDLE
-#undef BLINK_AT_RAMP_MIDDLE
-#endif
-
-// thermal config
-
-// temperature limit
-#define THERM_FASTER_LEVEL  130 // stop panicking at 50%/3A
-#define MIN_THERM_STEPDOWN  MAX_1x7135
-
-//#define THERM_LOOKAHEAD 4 // 4 by default -> decrease for longer turbo
-#define THERM_NEXT_WARNING_THRESHOLD 48 // 24 by default -> increase for fewer adjustments (more stable output on large time scale)
-#define THERM_RESPONSE_MAGNITUDE 32 // 64 by default -> decrease for smaller adjustments (removes dip post turbo)
-//#define THERM_WINDOW_SIZE 1 // 2 by default -> decrease for tighter temperature regulation
-
-
-// UI
-
-//#define SIMPLE_UI_ACTIVE 0 // advanced UI by default
-
-// allow Aux Config and Strobe Modes in Simple UI
-#define USE_EXTENDED_SIMPLE_UI
-
-// Allow 3C in Simple UI for switching between smooth and stepped ramping
-#define USE_SIMPLE_UI_RAMPING_TOGGLE
-
-#define DEFAULT_2C_STYLE 1 // enable 2 click turbo
-
-
-// AUX
-
-//#define USE_BUTTON_LED
-
-// this light has three aux LED channels: R, G, B
-#define USE_AUX_RGB_LEDS
-
-// show each channel while it scroll by in the menu
-#define USE_CONFIG_COLORS
-
-// blink numbers on the main LEDs by default
-#define DEFAULT_BLINK_CHANNEL  CM_MAIN
-
-// use aux red + aux blue for police strobe
-#define USE_POLICE_COLOR_STROBE_MODE
-#define POLICE_STROBE_USES_AUX
-#define POLICE_COLOR_STROBE_CH1        CM_AUXRED
-#define POLICE_COLOR_STROBE_CH2        CM_AUXBLU
-
-// the aux LEDs are front-facing, so turn them off while main LEDs are on
-#ifdef USE_INDICATOR_LED_WHILE_RAMPING
-#undef USE_INDICATOR_LED_WHILE_RAMPING
-#endif
-
-
-// Misc
-
-#define PARTY_STROBE_ONTIME 1  // slow down party strobe
-#define STROBE_OFF_LEVEL 1  // keep the regulator chip on between pulses
-
-// smoother candle mode with bigger oscillations
-#define CANDLE_AMPLITUDE 40
-
-// enable 13H factory reset so it can be used on tail e-switch lights
-#define USE_SOFT_FACTORY_RESET
-