diff options
| author | Selene ToyKeeper | 2024-03-04 04:42:09 -0700 |
|---|---|---|
| committer | Selene ToyKeeper | 2024-03-04 04:42:09 -0700 |
| commit | 984758be300392d8390c9407b8c58a01f945653a (patch) | |
| tree | a5087c862d40e4c23976dfe6c9a263d2623f7b39 /hw/wurkkos/ts11 | |
| parent | Merge branch 'trunk' into emisar-d3aa (diff) | |
| parent | enabled eeprom read/write stabilization by default on recent MCUs, (diff) | |
| download | anduril-984758be300392d8390c9407b8c58a01f945653a.tar.gz anduril-984758be300392d8390c9407b8c58a01f945653a.tar.bz2 anduril-984758be300392d8390c9407b8c58a01f945653a.zip | |
Merge branch 'trunk' into emisar-d3aa
* trunk:
enabled eeprom read/write stabilization by default on recent MCUs, to prevent corrupt data
thefreeman-avr32dd20-devkit: enable boost bypass at boot, so AA/NiMH can boot
avr32dd20-devkit: use unimplemented "CH" pin as a boost bypass control
added "emisar-2ch-fet-joined" build, for D4S w/ lighted switch
documented FW3X swapped pins better
documented Wurkkos TS25/TS11/FC13 distinctions
build.sh: don't require DFPs, newer avr-libc doesn't need them
use BLIP_LEVEL instead of 0 for "blip"s
clarified which-hex-file.md a bit; make sure the model number matches
fw3x: reduced pulsing on low modes
Diffstat (limited to 'hw/wurkkos/ts11')
| -rw-r--r-- | hw/wurkkos/ts11/README.md | 8 |
1 files changed, 8 insertions, 0 deletions
diff --git a/hw/wurkkos/ts11/README.md b/hw/wurkkos/ts11/README.md new file mode 100644 index 0000000..e53e038 --- /dev/null +++ b/hw/wurkkos/ts11/README.md @@ -0,0 +1,8 @@ +# Wurkkos TS11 + +Single LED 18350 / 18650 torch with FET+1 driver, RGB button, and RGB front +aux. Includes a built-in charger too, separate from the main torch circuit. + +May ship with the `0715` (wurkkos-ts25) firmware installed, but the RGB button +does not work fully until upgrading to this TS11 firmware. + |