merged updates from fsm branch, including RampingIOS V3 and Werner UIs...

... plus a bunch of other updates, fixes, improvements, etc.

1 files changed, 36 insertions, 0 deletions

diff --git a/hwdef-Emisar_D4.h b/hwdef-Emisar_D4.h
new file mode 100644
index 0000000..105d3b9
--- /dev/null
+++ b/hwdef-Emisar_D4.h
@@ -0,0 +1,36 @@
+/* Emisar D4 driver layout
+ *           ----
+ *   Reset -|1  8|- VCC
+ * eswitch -|2  7|-
+ * AUX LED -|3  6|- PWM (FET)
+ *     GND -|4  5|- PWM (1x7135)
+ *           ----
+ */
+
+#define PWM_CHANNELS 2
+
+#define AUXLED_PIN   PB4    // pin 3
+
+#define SWITCH_PIN   PB3    // pin 2
+#define SWITCH_PCINT PCINT3 // pin 2 pin change interrupt
+
+#define PWM1_PIN PB0        // pin 5, 1x7135 PWM
+#define PWM1_LVL OCR0A      // OCR0A is the output compare register for PB0
+#define PWM2_PIN PB1        // pin 6, FET PWM
+#define PWM2_LVL OCR0B      // OCR0B is the output compare register for PB1
+
+// (FIXME: remove?  not used?)
+#define VOLTAGE_PIN PB2     // pin 7, voltage ADC
+#define ADC_CHANNEL 0x01    // MUX 01 corresponds with PB2
+#define ADC_DIDR    ADC1D   // Digital input disable bit corresponding with PB2
+#define ADC_PRSCL   0x06    // clk/64
+
+// average drop across diode on this hardware
+#define VOLTAGE_FUDGE_FACTOR 5  // add 0.25V
+
+//#define TEMP_DIDR   ADC4D
+#define TEMP_CHANNEL 0b00001111
+
+#define FAST 0xA3           // fast PWM both channels
+#define PHASE 0xA1          // phase-correct PWM both channels
+