merged gchart's latest changes:

- sp10-pro shutoff fix
- mt35-mini support
- power channel enable/disable timing delays
  (though I wouldn't recommend doing 80ms like the thefreeman code does,
   since that's more than one WDT cycle (16ms))

1 files changed, 47 insertions, 0 deletions

diff --git a/hwdef-Mateminco_MT35-Mini.h b/hwdef-Mateminco_MT35-Mini.h
new file mode 100644
index 0000000..344f658
--- /dev/null
+++ b/hwdef-Mateminco_MT35-Mini.h
@@ -0,0 +1,47 @@
+#ifndef HWDEF_MT35_MINI_H
+#define HWDEF_MT35_MINI_H
+
+/* Mateminco MT35-Mini / Astrolux FT03
+ *           ----
+ *   Reset -|1  8|- VCC
+ * eswitch -|2  7|- Aux LED
+ *  1x7135 -|3  6|- NC
+ *     GND -|4  5|- FET
+ *           ----
+ */
+
+#define PWM_CHANNELS 2
+
+#ifndef SWITCH_PIN
+#define SWITCH_PIN   PB3    // pin 2
+#define SWITCH_PCINT PCINT3 // pin 2 pin change interrupt
+#endif
+
+#ifndef PWM1_PIN
+#define PWM1_PIN PB4        // pin 3, 1x7135 PWM
+#define PWM1_LVL OCR1B      // OCR1B is the output compare register for PB0
+#endif
+
+#ifndef PWM2_PIN
+#define PWM2_PIN PB0        // pin 5, FET PWM
+#define PWM2_LVL OCR0A      // OCR0A is the output compare register for PB4
+#endif
+
+#define ADC_PRSCL   0x07    // clk/128
+
+// average drop across diode on this hardware
+#ifndef VOLTAGE_FUDGE_FACTOR
+#define VOLTAGE_FUDGE_FACTOR 7  // add 0.35V
+#endif
+
+// lighted button
+#ifndef AUXLED_PIN
+#define AUXLED_PIN   PB2    // pin 7
+#endif
+
+#define FAST 0xA3           // fast PWM both channels
+#define PHASE 0xA1          // phase-correct PWM both channels
+
+#define LAYOUT_DEFINED
+
+#endif