reorganized project files (part 1)

(just moved files, didn't change the contents yet,
 and nothing will work without updating #includes and build scripts and stuff)

1 files changed, 0 insertions, 56 deletions

diff --git a/spaghetti-monster/werner/README b/spaghetti-monster/werner/README
deleted file mode 100644
index 5fe392d..0000000
--- a/spaghetti-monster/werner/README
+++ /dev/null
@@ -1,56 +0,0 @@
-This is a Werner-style interface for dual-switch lights
-(e-switch + clicky switch).  What that means is:
-
-While the clicky switch is off:
-
-  - Click the clicky switch:  Turn on, at the last-used level.  The clicky
-    switch works as a momentary mode.
-
-  - Click the clicky switch while holding the e-switch:  Go into sort of a
-    utility mode.
-
-While on, in a normal steady mode:
-
-  - Click the clicky switch: Turn off.
-
-  - Click the e-switch: Brighter.  One step per click.
-
-  - Hold the e-switch: Dimmer.  Keep holding to go down multiple steps.
-
-While in standby, in utility mode:
-
-  - Click the e-switch: Turn on.
-
-  - Hold the e-switch: Turn on at lowest level.
-
-  - Double-click the e-switch: Turn on at highest level.
-
-  - Triple-click the e-switch: Battery check mode.
-
-  - Quad-click the e-switch: Ramp config mode.
-
-While in battery check mode:
-
-  - Click either switch: Turn off.
-
-  - Double-click the e-switch: Go to temperature check mode.
-
-While in temperature check mode:
-
-  - Click either switch: Turn off.
-
-  - Double-click the e-switch: Go to battery check mode.
-
-  - Quad-click the e-switch: Go to thermal config mode.
-
-Ramp config mode and thermal config mode work the same as in Anduril or
-RampingIOS V3.  The options are:
-
-  - Ramp config mode:
-    1. Floor level.
-    2. Ceiling level.
-    3. Number of steps.
-
-  - Thermal config mode:
-    1. Calibrate sensor by entering current temperature in C.
-    2. Set temperature limit to 30 C + N clicks.