added MD11-noFET, tweaked values in MD11-FET build too

2 files changed, 46 insertions, 3 deletions

diff --git a/spaghetti-monster/anduril/cfg-noctigon-md11-nofet.h b/spaghetti-monster/anduril/cfg-noctigon-md11-nofet.h
new file mode 100644
index 0000000..0efe85f
--- /dev/null
+++ b/spaghetti-monster/anduril/cfg-noctigon-md11-nofet.h
@@ -0,0 +1,42 @@
+// Noctigon MD11-noFET config options for Anduril
+#include "cfg-noctigon-md11.h"
+#undef MODEL_NUMBER
+#define MODEL_NUMBER "0272"
+// ATTINY: 1634
+
+// turn off the DD FET
+#undef PWM_CHANNELS
+#define PWM_CHANNELS 1
+
+// level_calc.py 5.01 1 149 7135 1 0.3 1740 --pwm dyn:78:16384:255
+#undef PWM1_LEVELS
+#define PWM1_LEVELS 0,1,1,1,2,3,3,4,5,6,7,8,9,10,11,13,14,16,17,19,21,23,25,27,29,31,34,36,39,42,44,47,50,53,57,60,63,67,70,74,77,81,85,88,92,96,99,103,107,110,113,117,120,123,126,128,130,133,134,136,137,137,137,137,136,135,133,130,126,122,117,111,104,96,87,76,65,52,38,22,23,25,26,27,28,29,30,32,33,34,36,37,39,40,42,43,45,47,49,51,53,55,57,59,61,63,66,68,70,73,76,78,81,84,87,90,93,96,99,103,106,110,113,117,121,125,129,133,137,142,146,151,155,160,165,170,175,181,186,192,197,203,209,215,222,228,234,241,248,255
+#undef PWM2_LEVELS
+#undef PWM_TOPS
+#define PWM_TOPS 16383,16383,12404,8140,11462,14700,11041,12947,13795,14111,14124,13946,13641,13248,12791,13418,12808,13057,12385,12428,12358,12209,12000,11746,11459,11147,11158,10793,10708,10576,10173,9998,9800,9585,9527,9278,9023,8901,8634,8486,8216,8053,7881,7615,7440,7261,7009,6832,6656,6422,6196,6031,5819,5615,5419,5190,4973,4803,4571,4386,4179,3955,3745,3549,3340,3145,2940,2729,2513,2312,2109,1903,1697,1491,1286,1070,871,662,459,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255
+#undef DEFAULT_LEVEL
+#define DEFAULT_LEVEL 50
+#undef MAX_1x7135
+#define MAX_1x7135 150
+
+// make candle mode wobble more
+#ifdef CANDLE_AMPLITUDE
+#undef CANDLE_AMPLITUDE
+#endif
+#define CANDLE_AMPLITUDE 35
+
+
+// slow down party strobe; this driver can't pulse for 1ms or less
+// (only needed on no-FET build)
+#define PARTY_STROBE_ONTIME 2
+
+// jump start a bit higher than base driver
+#undef DEFAULT_JUMP_START_LEVEL
+#define DEFAULT_JUMP_START_LEVEL 25
+
+// stop panicking at ~70% power or ~600 lm
+#undef THERM_FASTER_LEVEL
+#define THERM_FASTER_LEVEL 130
+#undef MIN_THERM_STEPDOWN
+#define MIN_THERM_STEPDOWN 80  // must be > end of dynamic PWM range
+
diff --git a/spaghetti-monster/anduril/cfg-noctigon-md11.h b/spaghetti-monster/anduril/cfg-noctigon-md11.h
index ea768af..130e05c 100644
--- a/spaghetti-monster/anduril/cfg-noctigon-md11.h
+++ b/spaghetti-monster/anduril/cfg-noctigon-md11.h
@@ -48,10 +48,11 @@
 #define SIMPLE_UI_STEPS 5
 
 // make candle mode wobble more
-#define CANDLE_AMPLITUDE 32
+#define CANDLE_AMPLITUDE 30
 
 // stop panicking at ~70% power or ~600 lm
 #define THERM_FASTER_LEVEL 130
+#define MIN_THERM_STEPDOWN 66  // must be > end of dynamic PWM range
 
 //#define THERM_RESPONSE_MAGNITUDE 32  // smaller adjustments, this host changes temperature slowly
 //#define THERM_NEXT_WARNING_THRESHOLD 32  // more error tolerance before adjusting
@@ -64,8 +65,8 @@
 
 // the power regulator is a bit slow, so push it harder for a quick response from off
 #define DEFAULT_JUMP_START_LEVEL 21
-//#define BLINK_BRIGHTNESS DEFAULT_LEVEL
-//#define BLINK_ONCE_TIME 12
+#define BLINK_BRIGHTNESS DEFAULT_LEVEL
+#define BLINK_ONCE_TIME 12
 
 // can't reset the normal way because power is connected before the button
 #define USE_SOFT_FACTORY_RESET