diff options
| -rw-r--r-- | hwdef-noctigon-kr4.c | 2 | ||||
| -rw-r--r-- | hwdef-noctigon-kr4.h | 12 | ||||
| -rw-r--r-- | spaghetti-monster/anduril/cfg-noctigon-kr4.h | 5 |
3 files changed, 12 insertions, 7 deletions
diff --git a/hwdef-noctigon-kr4.c b/hwdef-noctigon-kr4.c index bcb98fc..5813a9b 100644 --- a/hwdef-noctigon-kr4.c +++ b/hwdef-noctigon-kr4.c @@ -22,7 +22,7 @@ void set_level_main(uint8_t level) { PWM_DATATYPE ch1_pwm = PWM_GET(pwm1_levels, level); PWM_DATATYPE ch2_pwm = PWM_GET(pwm2_levels, level); // pulse frequency modulation, a.k.a. dynamic PWM - uint16_t top = PWM_GET(pwm_tops, level); + uint16_t top = PWM_GET16(pwm_tops, level); CH1_PWM = ch1_pwm; CH2_PWM = ch2_pwm; diff --git a/hwdef-noctigon-kr4.h b/hwdef-noctigon-kr4.h index 8caf262..2e19ba4 100644 --- a/hwdef-noctigon-kr4.h +++ b/hwdef-noctigon-kr4.h @@ -75,12 +75,12 @@ #define PWM_CHANNELS 2 // old, remove this -#define PWM_BITS 16 // 0 to 16383 at variable Hz, not 0 to 255 at 16 kHz -#define PWM_GET PWM_GET16 -#define PWM_DATATYPE uint16_t -#define PWM_DATATYPE2 uint32_t // only needs 32-bit if ramp values go over 255 -#define PWM1_DATATYPE uint16_t // linear ramp -#define PWM2_DATATYPE uint16_t // DD FET ramp +#define PWM_BITS 16 // dynamic 16-bit, but never goes over 255 +#define PWM_GET PWM_GET8 +#define PWM_DATATYPE uint16_t // is used for PWM_TOPS +#define PWM_DATATYPE2 uint16_t // only needs 32-bit if ramp values go over 255 +#define PWM1_DATATYPE uint8_t // linear ramp +#define PWM2_DATATYPE uint8_t // DD FET ramp // PWM parameters of both channels are tied together because they share a counter #define PWM_TOP ICR1 // holds the TOP value for for variable-resolution PWM diff --git a/spaghetti-monster/anduril/cfg-noctigon-kr4.h b/spaghetti-monster/anduril/cfg-noctigon-kr4.h index bfecbea..78c76de 100644 --- a/spaghetti-monster/anduril/cfg-noctigon-kr4.h +++ b/spaghetti-monster/anduril/cfg-noctigon-kr4.h @@ -90,6 +90,11 @@ // the default of 26 looks a bit rough, so increase it to make it smoother #define CANDLE_AMPLITUDE 33 +// don't blink while ramping +#ifdef BLINK_AT_RAMP_MIDDLE +#undef BLINK_AT_RAMP_MIDDLE +#endif + // can't reset the normal way because power is connected before the button #define USE_SOFT_FACTORY_RESET |