15 files changed, 18 insertions, 87 deletions
diff --git a/spaghetti-monster/anduril/anduril.c b/spaghetti-monster/anduril/anduril.c
index 469d0d8..bc2f9c6 100644
--- a/spaghetti-monster/anduril/anduril.c
+++ b/spaghetti-monster/anduril/anduril.c
@@ -22,7 +22,7 @@
 // Anduril config file name (set it here or define it at the gcc command line)
 //#define CONFIGFILE cfg-blf-q8.h
 
-#define USE_LVP  // FIXME: won't build when this option is turned off
+#define USE_LVP
 
 // parameters for this defined below or per-driver
 #define USE_THERMAL_REGULATION
@@ -275,6 +275,7 @@ void sos_blink(uint8_t num, uint8_t dah);
 uint8_t battcheck_state(Event event, uint16_t arg);
 #endif
 #ifdef USE_THERMAL_REGULATION
+#define USE_BLINK_NUM
 uint8_t tempcheck_state(Event event, uint16_t arg);
 uint8_t thermal_config_state(Event event, uint16_t arg);
 #endif
@@ -497,6 +498,7 @@ volatile uint8_t beacon_seconds = 2;
 #endif
 
 #ifdef USE_VERSION_CHECK
+#define USE_BLINK_DIGIT
 #include "version.h"
 const PROGMEM uint8_t version_number[] = VERSION_NUMBER;
 uint8_t version_check_state(Event event, uint16_t arg);
@@ -1585,11 +1587,13 @@ uint8_t tempcheck_state(Event event, uint16_t arg) {
         set_state(off_state, 0);
         return MISCHIEF_MANAGED;
     }
+    #ifdef USE_BATTCHECK
     // 2 clicks: battcheck mode
     else if (event == EV_2clicks) {
         set_state(battcheck_state, 0);
         return MISCHIEF_MANAGED;
     }
+    #endif
     // 4 clicks: thermal config mode
     else if (event == EV_4clicks) {
         push_state(thermal_config_state, 0);
@@ -1615,7 +1619,7 @@ uint8_t beacon_state(Event event, uint16_t arg) {
         set_state(sos_state, 0);
         #elif defined(USE_THERMAL_REGULATION)
         set_state(tempcheck_state, 0);
-        #else
+        #elif defined(USE_BATTCHECK)
         set_state(battcheck_state, 0);
         #endif
         return MISCHIEF_MANAGED;
@@ -1997,6 +2001,7 @@ uint8_t muggle_state(Event event, uint16_t arg) {
         return MISCHIEF_MANAGED;
     }
     #endif
+    #ifdef USE_LVP
     // low voltage is handled specially in muggle mode
     else if(event == EV_voltage_low) {
         uint8_t lvl = (actual_level >> 1) + (actual_level >> 2);
@@ -2007,6 +2012,7 @@ uint8_t muggle_state(Event event, uint16_t arg) {
         }
         return MISCHIEF_MANAGED;
     }
+    #endif
 
     return EVENT_NOT_HANDLED;
 }
diff --git a/spaghetti-monster/anduril/cfg-emisar-d18.h b/spaghetti-monster/anduril/cfg-emisar-d18.h
index 16fbacd..155a747 100644
--- a/spaghetti-monster/anduril/cfg-emisar-d18.h
+++ b/spaghetti-monster/anduril/cfg-emisar-d18.h
@@ -42,5 +42,3 @@
 
 // stop panicking at about ~40% power or ~5000 lm
 #define THERM_FASTER_LEVEL 125
-// optional, makes initial turbo step-down faster so first peak isn't as hot
-//#define THERM_HARD_TURBO_DROP
diff --git a/spaghetti-monster/anduril/cfg-emisar-d4.h b/spaghetti-monster/anduril/cfg-emisar-d4.h
index c86a534..501b9c7 100644
--- a/spaghetti-monster/anduril/cfg-emisar-d4.h
+++ b/spaghetti-monster/anduril/cfg-emisar-d4.h
@@ -24,8 +24,4 @@
 
 // stop panicking at ~30% power or ~1200 lm
 #define THERM_FASTER_LEVEL 105
-// respond to thermal changes faster
-#define THERMAL_WARNING_SECONDS 3
-#define THERMAL_UPDATE_SPEED 1
-#define THERM_PREDICTION_STRENGTH 4
 
diff --git a/spaghetti-monster/anduril/cfg-emisar-d4s.h b/spaghetti-monster/anduril/cfg-emisar-d4s.h
index 6fe95a6..88465da 100644
--- a/spaghetti-monster/anduril/cfg-emisar-d4s.h
+++ b/spaghetti-monster/anduril/cfg-emisar-d4s.h
@@ -42,8 +42,3 @@
 #ifdef THERM_HARD_TURBO_DROP
 #undef THERM_HARD_TURBO_DROP
 #endif
-
-#define THERMAL_WARNING_SECONDS 3
-#define THERMAL_UPDATE_SPEED 2
-#define THERM_PREDICTION_STRENGTH 4
-
diff --git a/spaghetti-monster/anduril/cfg-emisar-d4sv2.h b/spaghetti-monster/anduril/cfg-emisar-d4sv2.h
index c47e774..c578c4a 100644
--- a/spaghetti-monster/anduril/cfg-emisar-d4sv2.h
+++ b/spaghetti-monster/anduril/cfg-emisar-d4sv2.h
@@ -42,16 +42,6 @@
 // stop panicking at ~50% power or ~2000 lm
 #define THERM_FASTER_LEVEL 130
 
-// no need to be extra-careful on this light
-#ifdef THERM_HARD_TURBO_DROP
-#undef THERM_HARD_TURBO_DROP
-#endif
-
-// respond to thermal changes faster
-#define THERMAL_WARNING_SECONDS 3
-#define THERMAL_UPDATE_SPEED 2
-#define THERM_PREDICTION_STRENGTH 4
-
 // easier access to thermal config mode, for Emisar
 #define USE_TENCLICK_THERMAL_CONFIG
 
@@ -61,7 +51,3 @@
 
 // seems relevant on attiny1634
 #define THERM_CAL_OFFSET 5
-
-// attiny1634 has enough space to smooth out voltage readings
-#define USE_VOLTAGE_LOWPASS
-
diff --git a/spaghetti-monster/anduril/cfg-emisar-d4v2.h b/spaghetti-monster/anduril/cfg-emisar-d4v2.h
index 3da877e..241ca7e 100644
--- a/spaghetti-monster/anduril/cfg-emisar-d4v2.h
+++ b/spaghetti-monster/anduril/cfg-emisar-d4v2.h
@@ -37,22 +37,10 @@
 #define RAMP_DISCRETE_CEIL RAMP_SMOOTH_CEIL
 #define RAMP_DISCRETE_STEPS 7
 
-// optional, makes initial turbo step-down faster so first peak isn't as hot
-// the D4 runs very very hot, so be extra careful
-//#define THERM_HARD_TURBO_DROP
-
 // stop panicking at ~30% power or ~1200 lm
 #define THERM_FASTER_LEVEL 105
-// respond to thermal changes faster
-#define THERMAL_WARNING_SECONDS 3
-#define THERMAL_UPDATE_SPEED 1
-#define THERM_PREDICTION_STRENGTH 4
-//#define THERM_RESPONSE_MAGNITUDE 128
 
 // easier access to thermal config mode, for Emisar
 #define USE_TENCLICK_THERMAL_CONFIG
 
 #define THERM_CAL_OFFSET 5
-
-// attiny1634 has enough space to smooth out voltage readings
-#define USE_VOLTAGE_LOWPASS
diff --git a/spaghetti-monster/anduril/cfg-ff-pl47.h b/spaghetti-monster/anduril/cfg-ff-pl47.h
index 7a81c25..e6907c1 100644
--- a/spaghetti-monster/anduril/cfg-ff-pl47.h
+++ b/spaghetti-monster/anduril/cfg-ff-pl47.h
@@ -61,11 +61,6 @@
 // regulate down faster when the FET is active, slower otherwise
 #define THERM_FASTER_LEVEL 135  // throttle back faster when high
 
-// play it safe, don't try to regulate above the recommended safe level
-#ifdef THERM_HARD_TURBO_DROP
-#undef THERM_HARD_TURBO_DROP
-#endif
-
 // don't do this
 #undef BLINK_AT_RAMP_MIDDLE
 #undef BLINK_AT_RAMP_CEILING
diff --git a/spaghetti-monster/anduril/cfg-ff-pl47g2.h b/spaghetti-monster/anduril/cfg-ff-pl47g2.h
index d5dd79d..cab008c 100644
--- a/spaghetti-monster/anduril/cfg-ff-pl47g2.h
+++ b/spaghetti-monster/anduril/cfg-ff-pl47g2.h
@@ -49,11 +49,6 @@
 // regulate down faster when the FET is active, slower otherwise
 #define THERM_FASTER_LEVEL 135  // throttle back faster when high
 
-// hard drop doesn't seem to be needed on this light
-#ifdef THERM_HARD_TURBO_DROP
-#undef THERM_HARD_TURBO_DROP
-#endif
-
 // don't do this
 #undef BLINK_AT_RAMP_MIDDLE
 #undef BLINK_AT_RAMP_CEILING
diff --git a/spaghetti-monster/anduril/cfg-ff-rot66.h b/spaghetti-monster/anduril/cfg-ff-rot66.h
index 2a90343..a87b66d 100644
--- a/spaghetti-monster/anduril/cfg-ff-rot66.h
+++ b/spaghetti-monster/anduril/cfg-ff-rot66.h
@@ -38,9 +38,6 @@
 // regulate down faster when the FET is active, slower otherwise
 #define THERM_FASTER_LEVEL 130  // throttle back faster when high
 
-// play it safe, don't try to regulate above the recommended safe level
-//#define THERM_HARD_TURBO_DROP
-
 // don't do this
 #undef BLINK_AT_RAMP_MIDDLE
 #undef BLINK_AT_RAMP_CEILING
diff --git a/spaghetti-monster/anduril/cfg-mateminco-mf01-mini.h b/spaghetti-monster/anduril/cfg-mateminco-mf01-mini.h
index bbf751b..28c77c2 100644
--- a/spaghetti-monster/anduril/cfg-mateminco-mf01-mini.h
+++ b/spaghetti-monster/anduril/cfg-mateminco-mf01-mini.h
@@ -48,8 +48,3 @@
 
 #define USE_TENCLICK_THERMAL_CONFIG  // by request
 #define THERM_FASTER_LEVEL 130  // throttle back faster when high
-//#define THERM_HARD_TURBO_DROP  // this light is massively overpowered
-#define THERMAL_WARNING_SECONDS 1  // FIXME: increase by 2 after merging newer code
-//#define THERMAL_UPDATE_SPEED 1
-//#define THERM_PREDICTION_STRENGTH 4
-
diff --git a/spaghetti-monster/anduril/cfg-sofirn-sp36.h b/spaghetti-monster/anduril/cfg-sofirn-sp36.h
index 494a263..d808e2a 100644
--- a/spaghetti-monster/anduril/cfg-sofirn-sp36.h
+++ b/spaghetti-monster/anduril/cfg-sofirn-sp36.h
@@ -28,10 +28,3 @@
 #undef THERM_FASTER_LEVEL
 #endif
 #define THERM_FASTER_LEVEL 130
-
-// be extra-careful at high levels
-// (or not... this host seems to heat up pretty slowly)
-//#ifndef THERM_HARD_TURBO_DROP
-//#define THERM_HARD_TURBO_DROP
-//#endif
-
diff --git a/spaghetti-monster/fsm-adc.c b/spaghetti-monster/fsm-adc.c
index dd43cb9..59d624b 100644
--- a/spaghetti-monster/fsm-adc.c
+++ b/spaghetti-monster/fsm-adc.c
@@ -119,8 +119,8 @@ static inline uint8_t calc_voltage_divider(uint16_t value) {
 }
 #endif
 
-// Each full cycle runs ~4X per second with just voltage enabled,
-// or ~2X per second with voltage and temperature.
+// Each full cycle runs ~2X per second with just voltage enabled,
+// or ~1X per second with voltage and temperature.
 #if defined(USE_LVP) && defined(USE_THERMAL_REGULATION)
 #define ADC_CYCLES_PER_SECOND 1
 #else
@@ -276,6 +276,7 @@ static inline void ADC_voltage_handler() {
 
 
 #ifdef USE_THERMAL_REGULATION
+// generally happens once per second while awake
 static inline void ADC_temperature_handler() {
     // coarse adjustment
     #ifndef THERM_LOOKAHEAD
diff --git a/spaghetti-monster/fsm-adc.h b/spaghetti-monster/fsm-adc.h
index 6283b2c..241dee4 100644
--- a/spaghetti-monster/fsm-adc.h
+++ b/spaghetti-monster/fsm-adc.h
@@ -52,7 +52,9 @@ void adc_deferred();  // do the actual ADC-related calculations
 
 static inline void ADC_voltage_handler();
 volatile uint8_t voltage = 0;
+#ifdef USE_LVP
 void low_voltage();
+#endif
 
 #ifdef USE_BATTCHECK
 void battcheck();
@@ -67,10 +69,6 @@ void battcheck();
 
 
 #ifdef USE_THERMAL_REGULATION
-// default 1 seconds between thermal regulation events
-#ifndef THERMAL_WARNING_SECONDS
-#define THERMAL_WARNING_SECONDS 1
-#endif
 // try to keep temperature below 45 C
 #ifndef DEFAULT_THERM_CEIL
 #define DEFAULT_THERM_CEIL 45
@@ -83,14 +81,10 @@ void battcheck();
 #ifndef THERM_CAL_OFFSET
 #define THERM_CAL_OFFSET 0
 #endif
-// temperature now, in C (ish) * 2  (14.1 fixed-point)
+// temperature now, in C (ish)
 volatile int16_t temperature;
-// temperature in a few seconds, in C (ish) * 2  (14.1 fixed-point)
-volatile int16_t projected_temperature;  // Fight the future!
 uint8_t therm_ceil = DEFAULT_THERM_CEIL;
 int8_t therm_cal_offset = 0;
-//void low_temperature();
-//void high_temperature();
 volatile uint8_t reset_thermal_history = 1;
 static inline void ADC_temperature_handler();
 #endif  // ifdef USE_THERMAL_REGULATION
diff --git a/spaghetti-monster/fsm-standby.c b/spaghetti-monster/fsm-standby.c
index 14b6df1..b002b91 100644
--- a/spaghetti-monster/fsm-standby.c
+++ b/spaghetti-monster/fsm-standby.c
@@ -87,10 +87,6 @@ void sleep_until_eswitch_pressed()
     #ifdef USE_THERMAL_REGULATION
     // forget what the temperature was last time we were on
     reset_thermal_history = 1;
-    // FIXME: not sure if this should be here
-    // (the intent is to make sure temperature gets measured before
-    //  thermal logic gets executed)
-    //set_admux_therm();
     #endif
 
     // go back to normal running mode
diff --git a/spaghetti-monster/spaghetti-monster.txt b/spaghetti-monster/spaghetti-monster.txt
index 9e051f1..434e1bc 100644
--- a/spaghetti-monster/spaghetti-monster.txt
+++ b/spaghetti-monster/spaghetti-monster.txt
@@ -124,14 +124,13 @@ Event types:
         between events.
 
       - EV_temperature_high: Sent whenever the MCU's projected temperature 
-        is higher than therm_ceil.  Minimum of THERMAL_WARNING_SECONDS 
-        between events.  The 'arg' indicates how far the temperature 
-        exceeds the limit.
+        is higher than therm_ceil.  Minimum of one second between events.
+        The 'arg' indicates how far the temperature exceeds the limit.
 
       - EV_temperature_low: Sent whenever the MCU's projected temperature 
         is lower than (therm_ceil - THERMAL_WINDOW_SIZE).  Minimum of 
-        THERMAL_WARNING_SECONDS between events.  The 'arg' indicates how 
-        far the temperature exceeds the limit.
+        one second between events.  The 'arg' indicates how far the
+        temperature exceeds the limit.
 
     Button presses:
 
@@ -297,9 +296,6 @@ Useful #defines:
       - DEFAULT_THERM_CEIL: Set the temperature limit to use by default 
         when the user hasn't configured anything.
 
-      - THERMAL_WARNING_SECONDS: How long to wait between temperature 
-        events.
-
     - USE_RAMPING: Enable smooth ramping helpers.
 
       - RAMP_LENGTH: Pick a pre-defined ramp by length.  Defined sizes