diff options
| -rw-r--r-- | spaghetti-monster/anduril/anduril-manual.txt | 12 |
1 files changed, 10 insertions, 2 deletions
diff --git a/spaghetti-monster/anduril/anduril-manual.txt b/spaghetti-monster/anduril/anduril-manual.txt index 66a8ba0..cd4fe3e 100644 --- a/spaghetti-monster/anduril/anduril-manual.txt +++ b/spaghetti-monster/anduril/anduril-manual.txt @@ -51,7 +51,7 @@ While the light is on, a few basic actions are available: - Click: Turn off. - 2 clicks: Go to or from turbo (full power). - Hold: Change brightness (up). If the button was released less than - 1 second ago, or if it's already at the ceiling, it goes down + a second ago, or if it's already at the ceiling, it goes down instead. - Click, hold: Change brightness (down). - 3 clicks: Switch to the other ramp. @@ -113,7 +113,7 @@ In more detail, this is what each blinky / utility mode does: Blinks at a slow speed. The light stays on for half a second, and then stays off until the next blink. The brightness and the number - of seconds between pulses is configurable: + of seconds between pulses are configurable: - Brightness is the user's last-ramped level, so set this in ramping mode before starting beacon mode. @@ -348,3 +348,11 @@ click the button a few times: This should change the aux LEDs to the next mode supported on this light. + +For lights with a button LED, the button LED typically stays on while +the main emitters are on. Its brightness level is set in a way which +mirrors the main LED -- off, low, or high. + +For lights with front-facing aux LEDs, the aux LEDs typically stay off +when the main emitters are on, and when the light is otherwise awake. +The aux LEDs on most lights only turn on when the light is asleep. |