diff options
Diffstat (limited to 'fsm/misc.c')
| -rw-r--r-- | fsm/misc.c | 31 |
1 files changed, 6 insertions, 25 deletions
@@ -118,7 +118,8 @@ uint8_t blink_num(uint8_t num) { #ifdef USE_INDICATOR_LED void indicator_led(uint8_t lvl) { switch (lvl) { - #ifdef AVRXMEGA3 // ATTINY816, 817, etc + // FIXME: move this logic to arch/* + #if (MCU==0x1616) || (MCU==0x32dd20) // ATTINY816, 817, etc case 0: // indicator off AUXLED_PORT.DIRSET = (1 << AUXLED_PIN); // set as output @@ -192,7 +193,8 @@ void indicator_led_auto() { void button_led_set(uint8_t lvl) { switch (lvl) { - #ifdef AVRXMEGA3 // ATTINY816, 817, etc + // FIXME: move this logic to arch/* + #if (MCU==0x1616) || (MCU==0x32dd20) // ATTINY816, 817, etc case 0: // LED off BUTTON_LED_PORT.DIRSET = (1 << BUTTON_LED_PIN); // set as output @@ -240,7 +242,8 @@ void rgb_led_set(uint8_t value) { uint8_t pin = pins[i]; switch (lvl) { - #ifdef AVRXMEGA3 // ATTINY816, 817, etc + // FIXME: move this logic to arch/* + #if (MCU==0x1616) || (MCU==0x32dd20) // ATTINY816, 817, etc case 0: // LED off AUXLED_RGB_PORT.DIRSET = (1 << pin); // set as output @@ -288,25 +291,3 @@ uint8_t triangle_wave(uint8_t phase) { } #endif -#ifdef USE_REBOOT -void reboot() { - // put the WDT in hard reset mode, then trigger it - cli(); - #if (ATTINY == 25) || (ATTINY == 45) || (ATTINY == 85) - WDTCR = 0xD8 | WDTO_15MS; - #elif (ATTINY == 1634) - // allow protected configuration changes for next 4 clock cycles - CCP = 0xD8; // magic number - // reset (WDIF + WDE), no WDIE, fastest (16ms) timing (0000) - // (DS section 8.5.2 and table 8-4) - WDTCSR = 0b10001000; - #elif defined(AVRXMEGA3) // ATTINY816, 817, etc - CCP = CCP_IOREG_gc; // temporarily disable change protection - WDT.CTRLA = WDT_PERIOD_8CLK_gc; // Enable, timeout 8ms - #endif - sei(); - wdt_reset(); - while (1) {} -} -#endif - |