1 files changed, 0 insertions, 79 deletions
diff --git a/hw/fireflies/pl47/cfg.h b/hw/fireflies/pl47/cfg.h
deleted file mode 100644
index 315eea2..0000000
--- a/hw/fireflies/pl47/cfg.h
+++ /dev/null
@@ -1,79 +0,0 @@
-// Fireflies PL47 config options for Anduril
-// Copyright (C) 2018-2023 Selene ToyKeeper
-// SPDX-License-Identifier: GPL-3.0-or-later
-#pragma once
-
-#define MODEL_NUMBER "0421"
-#include "fireflies/pl47/hwdef.h"
-// ATTINY: 85
-
-// the button lights up
-#define USE_INDICATOR_LED
-// the aux LEDs are in the same place as the main LEDs
-#ifdef USE_INDICATOR_LED_WHILE_RAMPING
-#undef USE_INDICATOR_LED_WHILE_RAMPING
-#endif
-//#define USE_INDICATOR_LED_WHILE_RAMPING
-
-// off mode: high (2)
-// lockout: blinking (3)
-#define INDICATOR_LED_DEFAULT_MODE ((3<<2) + 2)
-
-// the "low" mode doesn't work on this light's aux LEDs
-// (but it does work on the switch LEDs)
-// Fireflies wants to skip aux LED mode 1 (low)
-#define INDICATOR_LED_SKIP_LOW
-
-
-#define RAMP_SIZE 150
-
-// driver is a FET + 3x7135, ~400 lm at highest regulated level
-// ramp copied from Emisar D4S ramp
-#define PWM1_LEVELS 1,1,2,2,3,3,4,4,5,5,6,6,7,8,8,9,10,10,11,12,13,14,15,16,17,18,19,21,22,23,25,26,27,29,31,32,34,36,38,40,42,44,46,49,51,54,56,59,62,65,68,71,74,78,81,85,89,93,97,101,106,110,115,120,125,130,136,141,147,153,160,166,173,180,187,195,202,210,219,227,236,245,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0
-#define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,3,4,5,7,8,10,11,13,14,16,18,19,21,23,25,27,29,31,34,36,38,41,43,46,48,51,54,57,60,63,66,69,72,76,79,83,87,91,95,99,103,107,112,116,121,126,131,136,141,146,152,158,163,169,175,182,188,195,202,209,216,223,231,239,247,255
-#define MAX_1x7135 83
-#define HALFSPEED_LEVEL 13
-#define QUARTERSPEED_LEVEL 6
-
-// ceiling is level 120/150
-#define RAMP_SMOOTH_FLOOR 1
-#define RAMP_SMOOTH_CEIL 120
-
-// 10, 28, 46, 65, 83, 101, 120  (83 is highest regulated)
-#define RAMP_DISCRETE_FLOOR 10
-#define RAMP_DISCRETE_CEIL  120
-#define RAMP_DISCRETE_STEPS 7
-
-// safe limit ~25% power / ~1000 lm
-// 10 34 59 [83] 108
-#define SIMPLE_UI_FLOOR RAMP_DISCRETE_FLOOR
-#define SIMPLE_UI_CEIL 108
-#define SIMPLE_UI_STEPS 5
-
-// ~25 lm to ~300 lm
-//#define SIMPLE_UI_FLOOR 30
-//#define SIMPLE_UI_CEIL  MAX_1x7135
-// ~50 lm to ~500 lm
-//#define SIMPLE_UI_FLOOR 40
-//#define SIMPLE_UI_CEIL  90
-
-// thermal regulation parameters
-#ifdef MIN_THERM_STEPDOWN
-#undef MIN_THERM_STEPDOWN  // this should be lower, because 3x7135 instead of 1x7135
-#endif
-#define MIN_THERM_STEPDOWN 60  // lowest value it'll step down to
-// regulate down faster when the FET is active, slower otherwise
-#define THERM_FASTER_LEVEL 135  // throttle back faster when high
-
-#ifndef BLINK_AT_RAMP_CEIL
-#define BLINK_AT_RAMP_CEIL
-#endif
-
-// don't do this
-#undef BLINK_AT_RAMP_MIDDLE
-
-#define USE_SMOOTH_STEPS
-
-// too big, turn off extra features
-#undef USE_SOS_MODE
-#undef USE_TACTICAL_MODE