4 files changed, 79 insertions, 0 deletions
diff --git a/hw/hank/kr1aa/anduril.h b/hw/hank/kr1aa/anduril.h
new file mode 100644
index 0000000..f3ed9ad
--- /dev/null
+++ b/hw/hank/kr1aa/anduril.h
@@ -0,0 +1,65 @@
+// Emisar / Noctigon KR1AA config options for Anduril
+// Copyright (C) 2026 Selene ToyKeeper
+// SPDX-License-Identifier: GPL-3.0-or-later
+#pragma once
+
+#define HWDEF_H hank/emisar-d3aa/hwdef.h
+#include "hank/anduril.h"
+#include "hank/emisar-d3aa/anduril.h"
+
+// wait this many ms at boot before testing the battery
+// (or doing anything else)
+// (to give the user more time to make a solid electrical connection)
+#define WEAK_BATTERY_TEST_DELAY  500
+
+#undef RAMP_SIZE
+#define RAMP_SIZE 150
+
+// 4 ramp segments:
+//   - low  1.024V
+//   - low  2.5  V
+//   - high 1.024V
+//   - high 2.5  V
+// 2nd gear starts at 23:
+// ./bin/dac-scale.py $( ./bin/level_calc.py 3.906 1 150 7135 3 0.01 1400 --pwm 285400 | grep PWM1 | cut -d : -f 2- )
+// top level for each "gear": 30 40 118 150
+// 2nd gear starts at 24:
+// ./bin/dac-scale.py $( ./bin/level_calc.py 3.856 1 150 7135 3 0.01 1400 --pwm 273200 | grep PWM1 | cut -d : -f 2- )
+// top level for each "gear": 30 40 117 150
+#undef PWM1_LEVELS
+#define PWM1_LEVELS \
+           3,   5,   6,   9,  12,  16,  21,  28,  36,  46,  57,  71,  86, 105, 126, 150, 177, 208, 243, 282, 326, 374, 428, 487, 552, 623, 700, 785, 877, 977, \
+         444, 491, 543, 598, 658, 722, 790, 862, 940,1023, \
+          24,  26,  29,  31,  33,  36,  39,  42,  45,  48,  52,  55,  59,  63,  67,  71,  76,  81,  86,  91,  96, 102, 108, 114, 120, 127, 134, 141, 149, 157, 165, 173, 182, 191, 200, 210, 220, 230, 241, 252, 264, 276, 288, 301, 314, 327, 341, 355, 370, 385, 401, 417, 434, 451, 469, 487, 505, 525, 544, 564, 585, 607, 628, 651, 674, 698, 722, 747, 773, 799, 826, 853, 881, 910, 940, 970,1001, \
+         423, 436, 450, 463, 478, 492, 507, 522, 538, 554, 570, 586, 603, 621, 638, 656, 675, 693, 712, 732, 752, 772, 793, 814, 836, 858, 880, 903, 926, 950, 974, 998,1023
+#undef PWM2_LEVELS
+#define PWM2_LEVELS \
+         V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, \
+         V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, \
+         V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, \
+         V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25
+#define MAX_1x7135            40
+#undef MAX_1x7135
+#define HDR_ENABLE_LEVEL_MIN  41
+#define MAX_1x7135            40
+
+#undef DEFAULT_LEVEL
+#define DEFAULT_LEVEL         50
+
+// no PWM, so MCU clock speed can be slow
+#undef HALFSPEED_LEVEL
+#define HALFSPEED_LEVEL      41
+#undef QUARTERSPEED_LEVEL
+#define QUARTERSPEED_LEVEL   40  // seems to run fine at 10kHz/4, try reducing more?
+
+
+// AUX
+
+// there is no lighted button
+// (but it doesn't hurt to leave this enabled,
+//  and then this firmware can be used on D3AA too)
+//#ifdef USE_BUTTON_LED
+//#undef USE_BUTTON_LED
+//#endif
+
+
diff --git a/hw/hank/kr1aa/arch b/hw/hank/kr1aa/arch
new file mode 100644
index 0000000..bcf4552
--- /dev/null
+++ b/hw/hank/kr1aa/arch
@@ -0,0 +1 @@
+avr32dd20
diff --git a/hw/hank/kr1aa/model b/hw/hank/kr1aa/model
new file mode 100644
index 0000000..cdc9591
--- /dev/null
+++ b/hw/hank/kr1aa/model
@@ -0,0 +1 @@
+0162
diff --git a/hw/hank/kr1aa/readme.md b/hw/hank/kr1aa/readme.md
new file mode 100644
index 0000000..247080b
--- /dev/null
+++ b/hw/hank/kr1aa/readme.md
@@ -0,0 +1,12 @@
+# Emisar / Noctigon KR1AA
+
+This is the same as the [D3AA](../emisar-d3aa) driver, but with the following
+changes:
+
+- Increased the time before measuring battery strength, to give the user more
+  time to tighten the tailcap first.  The host has a reputation for being
+  difficult to tighten quickly enough to get a strong connection.
+
+- Tweaked the ramp shape slightly to eliminate a "gear change" zig-zag which
+  seems to occur on KR1AA but not D3AA.
+