1 files changed, 83 insertions, 0 deletions
diff --git a/hw/hank/noctigon-k1/cfg.h b/hw/hank/noctigon-k1/cfg.h
new file mode 100644
index 0000000..b2d4697
--- /dev/null
+++ b/hw/hank/noctigon-k1/cfg.h
@@ -0,0 +1,83 @@
+// Noctigon K1 config options for Anduril
+// Copyright (C) 2019-2023 Selene ToyKeeper
+// SPDX-License-Identifier: GPL-3.0-or-later
+#pragma once
+
+#define MODEL_NUMBER "0251"
+// (originally known as Emisar D1S v2)
+#include "hwdef-noctigon-k1.h"
+#include "hank-cfg.h"
+// ATTINY: 1634
+
+// this light can safely run a bit hotter than most
+#undef DEFAULT_THERM_CEIL
+#define DEFAULT_THERM_CEIL 55
+
+// this light has three aux LED channels: R, G, B
+#define USE_AUX_RGB_LEDS
+#define USE_AUX_RGB_LEDS_WHILE_ON  5
+#define USE_INDICATOR_LED_WHILE_RAMPING
+
+
+#define RAMP_SIZE 150
+
+// ../../bin/level_calc.py cube 1 150 7135 1 4 1300
+// (with max_pwm set to 1023)
+// (level 0 flickers and isn't relevant on a thrower, so it's omitted)
+#define RAMP_LENGTH 150
+#define PWM1_LEVELS 1,1,2,2,3,3,4,4,5,6,6,7,8,9,10,11,12,13,14,15,16,17,18,20,21,23,24,26,27,29,31,32,34,36,38,40,43,45,47,49,52,54,57,60,62,65,68,71,74,77,81,84,87,91,95,98,102,106,110,114,118,122,127,131,136,141,145,150,155,160,166,171,176,182,188,193,199,205,211,218,224,231,237,244,251,258,265,272,280,287,295,303,310,319,327,335,344,352,361,370,379,388,397,407,416,426,436,446,457,467,477,488,499,510,521,533,544,556,568,580,592,604,617,629,642,655,668,682,695,709,723,737,751,766,781,795,810,826,841,857,872,888,904,921,937,954,971,988,1005,1023
+
+#define MAX_1x7135 50
+#define DEFAULT_LEVEL 50
+#define MIN_THERM_STEPDOWN 50  // should be above highest dyn_pwm level
+//#define HALFSPEED_LEVEL 12
+//#define QUARTERSPEED_LEVEL 4
+// don't slow down at low levels; this isn't that sort of light
+// (it needs to stay at full speed for the 10-bit PWM to work)
+#ifdef USE_DYNAMIC_UNDERCLOCKING
+#undef USE_DYNAMIC_UNDERCLOCKING
+#endif
+
+#define RAMP_SMOOTH_FLOOR 1
+#define RAMP_SMOOTH_CEIL  130
+// 10, 30, [50], 70, 90, 110, 130
+#define RAMP_DISCRETE_FLOOR 10
+#define RAMP_DISCRETE_CEIL  RAMP_SMOOTH_CEIL
+#define RAMP_DISCRETE_STEPS 7
+
+// safe limit ~75% power
+#define SIMPLE_UI_FLOOR RAMP_DISCRETE_FLOOR
+#define SIMPLE_UI_CEIL RAMP_DISCRETE_CEIL
+#define SIMPLE_UI_STEPS 5
+
+// stop panicking at ~70% power or ~600 lm
+#define THERM_FASTER_LEVEL 130
+
+#define THERM_CAL_OFFSET 5
+
+#define THERM_RESPONSE_MAGNITUDE 32  // smaller adjustments, this host changes temperature slowly
+#define THERM_NEXT_WARNING_THRESHOLD 32  // more error tolerance before adjusting
+
+// the power regulator is a bit slow, so push it harder for a quick response from off
+#define DEFAULT_JUMP_START_LEVEL 10
+#define BLINK_BRIGHTNESS DEFAULT_LEVEL
+#define BLINK_ONCE_TIME 12
+
+// show each channel while it scroll by in the menu
+#define USE_CONFIG_COLORS
+
+// there is usually no lighted button,
+// so blink numbers on the main LEDs by default (but allow user to change it)
+#define DEFAULT_BLINK_CHANNEL  CM_MAIN
+
+// slow down party strobe; this driver can't pulse for 1ms or less
+#define PARTY_STROBE_ONTIME 2
+
+// make candle mode wobble more
+#define CANDLE_AMPLITUDE 32
+
+// don't blink while ramping; the entire ramp is regulated
+#ifdef BLINK_AT_RAMP_MIDDLE
+#undef BLINK_AT_RAMP_MIDDLE
+#endif
+