1 files changed, 82 insertions, 0 deletions
diff --git a/hw/sofirn/blf-q8-t1616/anduril.h b/hw/sofirn/blf-q8-t1616/anduril.h
new file mode 100644
index 0000000..dca3aa8
--- /dev/null
+++ b/hw/sofirn/blf-q8-t1616/anduril.h
@@ -0,0 +1,82 @@
+// BLF Q8 config options for Anduril using the Attiny1616
+// Copyright (C) 2021-2023 gchart, Selene ToyKeeper
+// SPDX-License-Identifier: GPL-3.0-or-later
+#pragma once
+
+#define MODEL_NUMBER "0613"
+#include "sofirn/blf-q8-t1616/hwdef.h"
+#include "wurkkos/cfg.h"  // Sofirn lights are closely related to Wurkkos
+// ATTINY: 1616
+
+// the button lights up
+#define USE_INDICATOR_LED
+// the button is visible while main LEDs are on
+#define USE_INDICATOR_LED_WHILE_RAMPING
+// off mode: low (1)
+// lockout: blinking (3)
+#define INDICATOR_LED_DEFAULT_MODE ((3<<2) + 1)
+
+// copied from Wurkkos TS25 ramp
+#define RAMP_SIZE 150
+// 7135 at 75/150
+// level_calc.py 5.7895 2 150 7135 1 0.1 130 FET 1 10 3000 --pwm dyn:74:4096:255:3
+// (with some manual tweaks)
+#define PWM1_LEVELS  1,1,2,3,3,4,5,6,7,8,9,11,12,13,15,16,18,19,21,23,26,27,28,30,32,34,36,38,40,42,44,46,48,50,52,54,56,58,60,62,64,66,68,70,71,74,76,78,80,82,85,87,90,93,96,100,103,107,112,116,122,127,133,140,147,154,163,171,182,192,203,215,228,241,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0
+// non-zero part of FET channel calculated with:
+//   level_calc.py 3 1 75 7135 1 200 3000
+//   (FIXME? there's a visible bump when the FET kicks in, even with just 1/255)
+#define PWM2_LEVELS  0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,2,3,4,6,7,8,10,11,13,14,16,17,19,21,22,24,26,28,30,32,34,37,39,41,44,46,48,51,54,56,59,62,65,68,71,74,77,81,84,87,91,94,98,102,106,110,114,118,122,126,130,135,139,144,148,153,158,163,168,173,178,184,189,195,200,206,212,218,224,230,236,242,248,255
+#define PWM_TOPS     4095,2701,3200,3586,2518,2778,2834,2795,2705,2587,2455,2582,2412,2247,2256,2091,2062,1907,1860,1802,1737,1605,1542,1477,1412,1347,1284,1222,1162,1105,1050,997,946,898,853,810,768,730,693,658,625,594,564,536,503,485,462,439,418,398,384,366,353,340,327,319,307,298,292,284,280,273,269,266,263,260,258,256,256,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255
+
+#define MAX_1x7135 75
+#define DEFAULT_LEVEL 50
+#define MIN_THERM_STEPDOWN 60
+#define HALFSPEED_LEVEL 20
+#define QUARTERSPEED_LEVEL 5
+
+#define RAMP_SMOOTH_FLOOR    1
+#define RAMP_SMOOTH_CEIL     150
+// 20 38 56 [75] 93 111 130
+#define RAMP_DISCRETE_FLOOR  20
+#define RAMP_DISCRETE_CEIL   130
+#define RAMP_DISCRETE_STEPS  7
+
+// at Sofirn's request, use max (150) for the Simple UI ceiling
+#define SIMPLE_UI_FLOOR  1
+#define SIMPLE_UI_CEIL   150
+#define SIMPLE_UI_STEPS  5
+
+// also at Sofirn's request, enable 2 click turbo (Anduril 1 style)
+#define DEFAULT_2C_STYLE 1
+
+// enable SOS in the blinkies group
+#define USE_SOS_MODE
+#define USE_SOS_MODE_IN_BLINKY_GROUP
+
+// Allow 3C in Simple UI for switching between smooth and stepped ramping
+#define USE_SIMPLE_UI_RAMPING_TOGGLE
+
+// allow Aux Config and Strobe Modes in Simple UI
+#define USE_EXTENDED_SIMPLE_UI
+
+// stop panicking at ~75% power or ~3000 lm, this light has high thermal mass
+#define THERM_FASTER_LEVEL (RAMP_SIZE*9/10)  // throttle back faster when high
+
+// show each channel while it scroll by in the menu
+#define USE_CONFIG_COLORS
+
+// blink numbers on the aux LEDs by default
+#define DEFAULT_BLINK_CHANNEL  CM_AUX
+
+// the default of 26 looks a bit rough, so increase it to make it smoother
+#define CANDLE_AMPLITUDE 33
+
+// don't blink during the ramp; the button LED brightness is sufficient
+// to indicate which power channel(s) are being used
+#ifdef BLINK_AT_RAMP_MIDDLE
+#undef BLINK_AT_RAMP_MIDDLE
+#endif
+
+// enable factory reset on 13H without loosening tailcap (required)
+#define USE_SOFT_FACTORY_RESET
+