1 files changed, 0 insertions, 82 deletions
diff --git a/hw/sofirn/blf-q8-t1616/cfg.h b/hw/sofirn/blf-q8-t1616/cfg.h
deleted file mode 100644
index dca3aa8..0000000
--- a/hw/sofirn/blf-q8-t1616/cfg.h
+++ /dev/null
@@ -1,82 +0,0 @@
-// BLF Q8 config options for Anduril using the Attiny1616
-// Copyright (C) 2021-2023 gchart, Selene ToyKeeper
-// SPDX-License-Identifier: GPL-3.0-or-later
-#pragma once
-
-#define MODEL_NUMBER "0613"
-#include "sofirn/blf-q8-t1616/hwdef.h"
-#include "wurkkos/cfg.h"  // Sofirn lights are closely related to Wurkkos
-// ATTINY: 1616
-
-// the button lights up
-#define USE_INDICATOR_LED
-// the button is visible while main LEDs are on
-#define USE_INDICATOR_LED_WHILE_RAMPING
-// off mode: low (1)
-// lockout: blinking (3)
-#define INDICATOR_LED_DEFAULT_MODE ((3<<2) + 1)
-
-// copied from Wurkkos TS25 ramp
-#define RAMP_SIZE 150
-// 7135 at 75/150
-// level_calc.py 5.7895 2 150 7135 1 0.1 130 FET 1 10 3000 --pwm dyn:74:4096:255:3
-// (with some manual tweaks)
-#define PWM1_LEVELS  1,1,2,3,3,4,5,6,7,8,9,11,12,13,15,16,18,19,21,23,26,27,28,30,32,34,36,38,40,42,44,46,48,50,52,54,56,58,60,62,64,66,68,70,71,74,76,78,80,82,85,87,90,93,96,100,103,107,112,116,122,127,133,140,147,154,163,171,182,192,203,215,228,241,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0
-// non-zero part of FET channel calculated with:
-//   level_calc.py 3 1 75 7135 1 200 3000
-//   (FIXME? there's a visible bump when the FET kicks in, even with just 1/255)
-#define PWM2_LEVELS  0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,2,3,4,6,7,8,10,11,13,14,16,17,19,21,22,24,26,28,30,32,34,37,39,41,44,46,48,51,54,56,59,62,65,68,71,74,77,81,84,87,91,94,98,102,106,110,114,118,122,126,130,135,139,144,148,153,158,163,168,173,178,184,189,195,200,206,212,218,224,230,236,242,248,255
-#define PWM_TOPS     4095,2701,3200,3586,2518,2778,2834,2795,2705,2587,2455,2582,2412,2247,2256,2091,2062,1907,1860,1802,1737,1605,1542,1477,1412,1347,1284,1222,1162,1105,1050,997,946,898,853,810,768,730,693,658,625,594,564,536,503,485,462,439,418,398,384,366,353,340,327,319,307,298,292,284,280,273,269,266,263,260,258,256,256,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255
-
-#define MAX_1x7135 75
-#define DEFAULT_LEVEL 50
-#define MIN_THERM_STEPDOWN 60
-#define HALFSPEED_LEVEL 20
-#define QUARTERSPEED_LEVEL 5
-
-#define RAMP_SMOOTH_FLOOR    1
-#define RAMP_SMOOTH_CEIL     150
-// 20 38 56 [75] 93 111 130
-#define RAMP_DISCRETE_FLOOR  20
-#define RAMP_DISCRETE_CEIL   130
-#define RAMP_DISCRETE_STEPS  7
-
-// at Sofirn's request, use max (150) for the Simple UI ceiling
-#define SIMPLE_UI_FLOOR  1
-#define SIMPLE_UI_CEIL   150
-#define SIMPLE_UI_STEPS  5
-
-// also at Sofirn's request, enable 2 click turbo (Anduril 1 style)
-#define DEFAULT_2C_STYLE 1
-
-// enable SOS in the blinkies group
-#define USE_SOS_MODE
-#define USE_SOS_MODE_IN_BLINKY_GROUP
-
-// Allow 3C in Simple UI for switching between smooth and stepped ramping
-#define USE_SIMPLE_UI_RAMPING_TOGGLE
-
-// allow Aux Config and Strobe Modes in Simple UI
-#define USE_EXTENDED_SIMPLE_UI
-
-// stop panicking at ~75% power or ~3000 lm, this light has high thermal mass
-#define THERM_FASTER_LEVEL (RAMP_SIZE*9/10)  // throttle back faster when high
-
-// show each channel while it scroll by in the menu
-#define USE_CONFIG_COLORS
-
-// blink numbers on the aux LEDs by default
-#define DEFAULT_BLINK_CHANNEL  CM_AUX
-
-// the default of 26 looks a bit rough, so increase it to make it smoother
-#define CANDLE_AMPLITUDE 33
-
-// don't blink during the ramp; the button LED brightness is sufficient
-// to indicate which power channel(s) are being used
-#ifdef BLINK_AT_RAMP_MIDDLE
-#undef BLINK_AT_RAMP_MIDDLE
-#endif
-
-// enable factory reset on 13H without loosening tailcap (required)
-#define USE_SOFT_FACTORY_RESET
-