diff options
Diffstat (limited to 'hw/wurkkos/ts25/boost/anduril.h')
| -rw-r--r-- | hw/wurkkos/ts25/boost/anduril.h | 83 |
1 files changed, 0 insertions, 83 deletions
diff --git a/hw/wurkkos/ts25/boost/anduril.h b/hw/wurkkos/ts25/boost/anduril.h deleted file mode 100644 index c4541d4..0000000 --- a/hw/wurkkos/ts25/boost/anduril.h +++ /dev/null @@ -1,83 +0,0 @@ -// Wurkkos TS25 Boost -// Copyright (C) 2023 Selene ToyKeeper -// SPDX-License-Identifier: GPL-3.0-or-later -#pragma once - -#define HWDEF_H wurkkos/ts25/boost/hwdef.h -#include "wurkkos/anduril.h" - -// this light has three aux LED channels: R, G, B -#define USE_AUX_RGB_LEDS - -// don't turn on the aux LEDs while main LEDs are on -#ifdef USE_INDICATOR_LED_WHILE_RAMPING -#undef USE_INDICATOR_LED_WHILE_RAMPING -#endif -// (nope, 20250210 prototype has front aux instead of RGB button) -// show real-time battery status on RGB button -// when main LEDs are bright enough to overpower the front aux -//#define USE_INDICATOR_LED_WHILE_RAMPING -//#define USE_AUX_RGB_LEDS_WHILE_ON 20 - - -#define RAMP_SIZE 150 - -// delta-sigma modulated PWM (0b0HHHHHHHHLLLLLLL = 0, 8xHigh, 7xLow bits) -// level_calc.py 5.01 1 150 7135 0 0.2 2000 --pwm 32640 -// (max is (255 << 7), because it's 8-bit PWM plus 7 bits of DSM) -#define PWM1_LEVELS 0,1,2,3,4,5,6,7,9,10,12,14,17,19,22,25,28,32,36,41,45,50,56,62,69,76,84,92,101,110,121,132,143,156,169,184,199,215,232,251,270,291,313,336,360,386,414,442,473,505,539,574,612,651,693,736,782,829,880,932,987,1045,1105,1168,1233,1302,1374,1449,1527,1608,1693,1781,1873,1969,2068,2172,2279,2391,2507,2628,2753,2883,3018,3158,3303,3454,3609,3771,3938,4111,4289,4475,4666,4864,5068,5280,5498,5724,5957,6197,6445,6701,6965,7237,7518,7808,8106,8413,8730,9056,9392,9737,10093,10459,10835,11223,11621,12031,12452,12884,13329,13786,14255,14737,15232,15741,16262,16798,17347,17911,18489,19082,19691,20314,20954,21609,22281,22969,23674,24397,25137,25895,26671,27465,28279,29111,29963,30835,31727,32640 -#define MIN_THERM_STEPDOWN 50 -#define DEFAULT_LEVEL 70 -#define MAX_1x7135 150 -// moon at 1/4th speed for max runtime -// the rest at full speed, to reduce PWM -// (speed changes make a big visible bump because PWM) -#define HALFSPEED_LEVEL 1 -#define QUARTERSPEED_LEVEL 1 - -#define RAMP_SMOOTH_FLOOR 1 -#define RAMP_SMOOTH_CEIL 150 -// 10, 30, 50, [70], 90, 110, 130 -#define RAMP_DISCRETE_FLOOR 10 -#define RAMP_DISCRETE_CEIL 130 -#define RAMP_DISCRETE_STEPS 7 - -// at Wurkkos's request, reduce the Simple UI ceiling a little bit -// 25 50 [75] 100 125 -#define SIMPLE_UI_FLOOR 25 -#define SIMPLE_UI_CEIL 125 -#define SIMPLE_UI_STEPS 5 - -// stop panicking at ~50% power -#define THERM_FASTER_LEVEL 120 // throttle back faster when high - -#define BLINK_BRIGHTNESS 30 -#define BLINK_ONCE_TIME 12 - -// show each channel while it scroll by in the menu -#define USE_CONFIG_COLORS - -// blink numbers on the main LEDs by default -// (so battcheck will be visible while charging) -#define DEFAULT_BLINK_CHANNEL CM_MAIN -// blink numbers on the aux LEDs by default -//#define DEFAULT_BLINK_CHANNEL CM_AUXWHT - -// slow down party strobe; this driver can't pulse for less than 2ms -#define PARTY_STROBE_ONTIME 2 -//#define STROBE_OFF_LEVEL 1 // keep the regulator chip on between pulses - -// use aux red + aux blue for police strobe -#define USE_POLICE_COLOR_STROBE_MODE -#define POLICE_STROBE_USES_AUX -#define POLICE_COLOR_STROBE_CH1 CM_AUXRED -#define POLICE_COLOR_STROBE_CH2 CM_AUXBLU - -// the default of 26 looks a bit rough, so increase it to make it smoother -#define CANDLE_AMPLITUDE 33 - -// don't blink mid-ramp -#ifdef BLINK_AT_RAMP_MIDDLE -#undef BLINK_AT_RAMP_MIDDLE -#endif - |