1 files changed, 0 insertions, 48 deletions
diff --git a/hwdef-Emisar_D18.h b/hwdef-Emisar_D18.h
deleted file mode 100644
index 3a238eb..0000000
--- a/hwdef-Emisar_D18.h
+++ /dev/null
@@ -1,48 +0,0 @@
-#ifndef HWDEF_EMISAR_D18_H
-#define HWDEF_EMISAR_D18_H
-
-/* Emisar D18 (FET+13+1) driver layout
- *           ----
- *   Reset -|1  8|- VCC
- * eswitch -|2  7|- aux LED?
- *     FET -|3  6|- 13x7135
- *     GND -|4  5|-  1x7135
- *           ----
- */
-
-#define PWM_CHANNELS 3
-
-#ifndef SWITCH_PIN
-#define SWITCH_PIN   PB3    // pin 2
-#define SWITCH_PCINT PCINT3 // pin 2 pin change interrupt
-#endif
-
-#ifndef PWM1_PIN
-#define PWM1_PIN PB0        // pin 5, 1x7135 PWM
-#define PWM1_LVL OCR0A      // OCR0A is the output compare register for PB0
-#endif
-#ifndef PWM2_PIN
-#define PWM2_PIN PB1        // pin 6, 7x7135 PWM
-#define PWM2_LVL OCR0B      // OCR0B is the output compare register for PB1
-#endif
-#ifndef PWM3_PIN
-#define PWM3_PIN PB4        // pin 3, FET PWM
-#define PWM3_LVL OCR1B      // OCR1B is the output compare register for PB4
-#endif
-
-#ifndef AUXLED_PIN
-#define AUXLED_PIN PB2      // pin 7
-#endif
-#define ADC_PRSCL   0x07    // clk/128
-
-// average drop across diode on this hardware
-#ifndef VOLTAGE_FUDGE_FACTOR
-#define VOLTAGE_FUDGE_FACTOR 5  // add 0.25V
-#endif
-
-#define FAST 0xA3           // fast PWM both channels
-#define PHASE 0xA1          // phase-correct PWM both channels
-
-#define LAYOUT_DEFINED
-
-#endif