diff options
Diffstat (limited to 'hwdef-Emisar_D4Sv2-tintramp.h')
| -rw-r--r-- | hwdef-Emisar_D4Sv2-tintramp.h | 5 |
1 files changed, 4 insertions, 1 deletions
diff --git a/hwdef-Emisar_D4Sv2-tintramp.h b/hwdef-Emisar_D4Sv2-tintramp.h index 76f6097..90545f4 100644 --- a/hwdef-Emisar_D4Sv2-tintramp.h +++ b/hwdef-Emisar_D4Sv2-tintramp.h @@ -47,12 +47,15 @@ #define USE_DYN_PWM // dynamic frequency and speed #define PWM_DATATYPE2 uint32_t // only needs 32-bit if ramp values go over 255 +#ifndef SWITCH_PIN #define SWITCH_PIN PA7 // pin 20 #define SWITCH_PCINT PCINT7 // pin 20 pin change interrupt #define SWITCH_PCIE PCIE0 // PCIE1 is for PCINT[7:0] #define SWITCH_PCMSK PCMSK0 // PCMSK1 is for PCINT[7:0] #define SWITCH_PORT PINA // PINA or PINB or PINC +#define SWITCH_PUE PUEA // pullup group A #define PCINT_vect PCINT0_vect // ISR for PCINT[7:0] +#endif // usually PWM1_LVL would be a hardware register, but we need to abstract // it out to a soft brightness value, in order to handle tint ramping @@ -173,7 +176,7 @@ inline void hwdef_setup() { PWM1_TOP = PWM_TOP; // set up e-switch - PUEA = (1 << SWITCH_PIN); // pull-up for e-switch + SWITCH_PUE = (1 << SWITCH_PIN); // pull-up for e-switch SWITCH_PCMSK = (1 << SWITCH_PCINT); // enable pin change interrupt } |