diff options
Diffstat (limited to 'hwdef-Emisar_D4Sv2-tintramp.h')
| -rw-r--r-- | hwdef-Emisar_D4Sv2-tintramp.h | 16 |
1 files changed, 10 insertions, 6 deletions
diff --git a/hwdef-Emisar_D4Sv2-tintramp.h b/hwdef-Emisar_D4Sv2-tintramp.h index 64550c3..76f6097 100644 --- a/hwdef-Emisar_D4Sv2-tintramp.h +++ b/hwdef-Emisar_D4Sv2-tintramp.h @@ -19,7 +19,7 @@ * 12 PC3 RESET * 13 PC2 (none) * 14 PC1 SCK - * 15 PC0 main LED PWM (FET) (PWM0A) (unused because tint ramping) + * 15 PC0 main LED PWM (FET) (PWM0A) (unused on some models because tint ramping) * 16 PB3 main LED PWM (linear) (PWM1A) * 17 PB2 MISO * 18 PB1 MOSI / battery voltage (ADC6) @@ -63,11 +63,15 @@ uint16_t PWM1_LVL; #define TINT1_LVL OCR1A // OCR1A is the output compare register for PB3 #define PWM1_CNT TCNT1 // for dynamic PWM, reset phase -#define PWM2_PIN PA6 // pin 1, 2nd LED Opamp reference +// gah, this driver is weird... +// two linear channels are treated as one, +// while there's also a FET on one channel for turbo on half the LEDs +// so the FET needs to be "PWM2" but the second linear is "TINT2" +#define PWM3_PIN PA6 // pin 1, 2nd LED Opamp reference #define TINT2_LVL OCR1B // OCR1B is the output compare register for PA6 -//#define PWM3_PIN PC0 // pin 15, DD FET PWM -//#define PWM3_LVL OCR0A // OCR0A is the output compare register for PC0 +#define PWM2_PIN PC0 // pin 15, DD FET PWM +#define PWM2_LVL OCR0A // OCR0A is the output compare register for PC0 // PWM parameters of both channels are tied together because they share a counter #define PWM1_TOP ICR1 // holds the TOP value for for variable-resolution PWM @@ -126,9 +130,9 @@ uint16_t PWM1_LVL; // ... so just hardcode it in each hwdef file instead inline void hwdef_setup() { // enable output ports - //DDRC = (1 << PWM3_PIN); + DDRC = (1 << PWM2_PIN); DDRB = (1 << PWM1_PIN); - DDRA = (1 << PWM2_PIN) + DDRA = (1 << PWM3_PIN) | (1 << AUXLED_R_PIN) | (1 << AUXLED_G_PIN) | (1 << AUXLED_B_PIN) |