diff options
Diffstat (limited to 'hwdef-Sofirn_SP10-Pro.h')
| -rw-r--r-- | hwdef-Sofirn_SP10-Pro.h | 18 |
1 files changed, 17 insertions, 1 deletions
diff --git a/hwdef-Sofirn_SP10-Pro.h b/hwdef-Sofirn_SP10-Pro.h index 7d0d7f5..e47131a 100644 --- a/hwdef-Sofirn_SP10-Pro.h +++ b/hwdef-Sofirn_SP10-Pro.h @@ -53,7 +53,7 @@ PA1 : Boost Enable #define LED_ENABLE_PIN PIN1_bp #define LED_ENABLE_PORT PORTA_OUT -#define LED_DISABLE_DELAY 4 +#define LED_OFF_DELAY 4 #define USE_VOLTAGE_DIVIDER // use a dedicated pin, not VCC, because VCC input is flattened #define DUAL_VOLTAGE_FLOOR 21 // for AA/14500 boost drivers, don't indicate low voltage if below this level @@ -122,4 +122,20 @@ inline void hwdef_setup() { } +// set fuses, these carry over to the ELF file but not the HEX file +// we need this for enabling BOD in Active Mode from the factory. +// settings can be verified / dumped from the ELF file using this +// command: avr-objdump -d -S -j .fuse anduril.elf +FUSES = { + .WDTCFG = FUSE_WDTCFG_DEFAULT, /* Watchdog Configuration */ + .BODCFG = FUSE_ACTIVE0_bm, /* BOD Configuration */ + .OSCCFG = FUSE_OSCCFG_DEFAULT, /* Oscillator Configuration */ + .TCD0CFG = FUSE_TCD0CFG_DEFAULT, /* TCD0 Configuration */ + .SYSCFG0 = FUSE_SYSCFG0_DEFAULT, /* System Configuration 0 */ + .SYSCFG1 = FUSE_SYSCFG1_DEFAULT, /* System Configuration 1 */ + .APPEND = FUSE_APPEND_DEFAULT, /* Application Code Section End */ + .BOOTEND = FUSE_BOOTEND_DEFAULT, /* Boot Section End */ +}; + + #endif |