diff options
Diffstat (limited to 'spaghetti-monster/fsm-adc.c')
| -rw-r--r-- | spaghetti-monster/fsm-adc.c | 494 |
1 files changed, 252 insertions, 242 deletions
diff --git a/spaghetti-monster/fsm-adc.c b/spaghetti-monster/fsm-adc.c index 3763a3e..59d624b 100644 --- a/spaghetti-monster/fsm-adc.c +++ b/spaghetti-monster/fsm-adc.c @@ -22,38 +22,48 @@ static inline void set_admux_therm() { - #if (ATTINY == 25) || (ATTINY == 45) || (ATTINY == 85) || (ATTINY == 1634) + #if (ATTINY == 1634) ADMUX = ADMUX_THERM; - #elif (ATTINY == 841) + #elif (ATTINY == 25) || (ATTINY == 45) || (ATTINY == 85) + ADMUX = ADMUX_THERM | (1 << ADLAR); + #elif (ATTINY == 841) // FIXME: not tested ADMUXA = ADMUXA_THERM; ADMUXB = ADMUXB_THERM; #else #error Unrecognized MCU type #endif adc_channel = 1; + adc_sample_count = 0; // first result is unstable + ADC_start_measurement(); } inline void set_admux_voltage() { - #if (ATTINY == 25) || (ATTINY == 45) || (ATTINY == 85) || (ATTINY == 1634) - #ifdef USE_VOLTAGE_DIVIDER - // 1.1V / pin7 - ADMUX = ADMUX_VOLTAGE_DIVIDER; - #else - // VCC / 1.1V reference - ADMUX = ADMUX_VCC; + #if (ATTINY == 1634) + #ifdef USE_VOLTAGE_DIVIDER // 1.1V / pin7 + ADMUX = ADMUX_VOLTAGE_DIVIDER; + #else // VCC / 1.1V reference + ADMUX = ADMUX_VCC; #endif - #elif (ATTINY == 841) - #ifdef USE_VOLTAGE_DIVIDER - ADMUXA = ADMUXA_VOLTAGE_DIVIDER; - ADMUXB = ADMUXB_VOLTAGE_DIVIDER; - #else - ADMUXA = ADMUXA_VCC; - ADMUXB = ADMUXB_VCC; + #elif (ATTINY == 25) || (ATTINY == 45) || (ATTINY == 85) + #ifdef USE_VOLTAGE_DIVIDER // 1.1V / pin7 + ADMUX = ADMUX_VOLTAGE_DIVIDER | (1 << ADLAR); + #else // VCC / 1.1V reference + ADMUX = ADMUX_VCC | (1 << ADLAR); + #endif + #elif (ATTINY == 841) // FIXME: not tested + #ifdef USE_VOLTAGE_DIVIDER // 1.1V / pin7 + ADMUXA = ADMUXA_VOLTAGE_DIVIDER; + ADMUXB = ADMUXB_VOLTAGE_DIVIDER; + #else // VCC / 1.1V reference + ADMUXA = ADMUXA_VCC; + ADMUXB = ADMUXB_VCC; #endif #else #error Unrecognized MCU type #endif adc_channel = 0; + adc_sample_count = 0; // first result is unstable + ADC_start_measurement(); } inline void ADC_start_measurement() { @@ -70,24 +80,25 @@ inline void ADC_on() #if (ATTINY == 25) || (ATTINY == 45) || (ATTINY == 85) || (ATTINY == 1634) set_admux_voltage(); #ifdef USE_VOLTAGE_DIVIDER - // disable digital input on divider pin to reduce power consumption - DIDR0 |= (1 << VOLTAGE_ADC_DIDR); + // disable digital input on divider pin to reduce power consumption + DIDR0 |= (1 << VOLTAGE_ADC_DIDR); #else - // disable digital input on VCC pin to reduce power consumption - //DIDR0 |= (1 << ADC_DIDR); // FIXME: unsure how to handle for VCC pin + // disable digital input on VCC pin to reduce power consumption + //DIDR0 |= (1 << ADC_DIDR); // FIXME: unsure how to handle for VCC pin #endif #if (ATTINY == 1634) - ACSRA |= (1 << ACD); // turn off analog comparator to save power + //ACSRA |= (1 << ACD); // turn off analog comparator to save power + ADCSRB |= (1 << ADLAR); // left-adjust flag is here instead of ADMUX #endif - // enable, start, prescale - ADCSRA = (1 << ADEN) | (1 << ADSC) | ADC_PRSCL; + // enable, start, auto-retrigger, prescale + ADCSRA = (1 << ADEN) | (1 << ADSC) | (1 << ADATE) | ADC_PRSCL; // end tiny25/45/85 - #elif (ATTINY == 841) + #elif (ATTINY == 841) // FIXME: not tested, missing left-adjust ADCSRB = 0; // Right adjusted, auto trigger bits cleared. //ADCSRA = (1 << ADEN ) | 0b011; // ADC on, prescaler division factor 8. set_admux_voltage(); - // enable, start, prescale - ADCSRA = (1 << ADEN) | (1 << ADSC) | ADC_PRSCL; + // enable, start, auto-retrigger, prescale + ADCSRA = (1 << ADEN) | (1 << ADSC) | (1 << ADATE) | ADC_PRSCL; //ADCSRA |= (1 << ADSC); // start measuring #else #error Unrecognized MCU type @@ -102,125 +113,142 @@ inline void ADC_off() { static inline uint8_t calc_voltage_divider(uint16_t value) { // use 9.7 fixed-point to get sufficient precision uint16_t adc_per_volt = ((ADC_44<<7) - (ADC_22<<7)) / (44-22); - // incoming value is 8.2 fixed-point, so shift it 2 bits less - uint8_t result = ((value<<5) / adc_per_volt) + VOLTAGE_FUDGE_FACTOR; + // shift incoming value into a matching position + uint8_t result = ((value>>1) / adc_per_volt) + VOLTAGE_FUDGE_FACTOR; return result; } #endif -// Each full cycle runs 15.6X per second with just voltage enabled, -// or 7.8X per second with voltage and temperature. +// Each full cycle runs ~2X per second with just voltage enabled, +// or ~1X per second with voltage and temperature. #if defined(USE_LVP) && defined(USE_THERMAL_REGULATION) -#define ADC_CYCLES_PER_SECOND 8 +#define ADC_CYCLES_PER_SECOND 1 #else -#define ADC_CYCLES_PER_SECOND 16 -#endif - -#ifdef USE_THERMAL_REGULATION -#define ADC_STEPS 2 -#else -#define ADC_STEPS 1 +#define ADC_CYCLES_PER_SECOND 2 #endif // happens every time the ADC sampler finishes a measurement ISR(ADC_vect) { - #ifdef USE_PSEUDO_RAND - // real-world entropy makes this a true random, not pseudo - pseudo_rand_seed += ADCL; - #endif - if (irq_adc_stable) { // skip first result; it's junk - adc_values[adc_channel] = ADC; // save this for later use - irq_adc = 1; // a value was saved, so trigger deferred logic + if (adc_sample_count) { + + uint16_t m; // latest measurement + uint16_t s; // smoothed measurement + uint8_t channel = adc_channel; + + // update the latest value + m = ADC; + adc_raw[channel] = m; + + // lowpass the value + //s = adc_smooth[channel]; // easier to read + uint16_t *v = adc_smooth + channel; // compiles smaller + s = *v; + if (m > s) { s++; } + if (m < s) { s--; } + //adc_smooth[channel] = s; + *v = s; + + // track what woke us up, and enable deferred logic + irq_adc = 1; + } - irq_adc_stable = 1; - // start another measurement - // (is explicit because it otherwise doesn't seem to happen during standby mode) - ADC_start_measurement(); + // the next measurement isn't the first + adc_sample_count = 1; + // rollover doesn't really matter + //adc_sample_count ++; + } -void ADC_inner() { +void adc_deferred() { irq_adc = 0; // event handled - // the ADC triggers repeatedly when it's on, but we only want one value - // (so ignore everything after the first value, until it's manually reset) - if (! adcint_enable) return; + #ifdef USE_PSEUDO_RAND + // real-world entropy makes this a true random, not pseudo + // Why here instead of the ISR? Because it makes the time-critical ISR + // code a few cycles faster and we don't need crypto-grade randomness. + pseudo_rand_seed += (ADCL >> 6) + (ADCH << 2); + #endif + + // the ADC triggers repeatedly when it's on, but we only need to run the + // voltage and temperature regulation stuff once in a while...so disable + // this after each activation, until it's manually enabled again + if (! adc_deferred_enable) return; // disable after one iteration - adcint_enable = 0; + adc_deferred_enable = 0; - #ifdef TICK_DURING_STANDBY + // what is being measured? 0 = battery voltage, 1 = temperature + uint8_t adc_step; + + #if defined(USE_LVP) && defined(USE_THERMAL_REGULATION) + // do whichever one is currently active + adc_step = adc_channel; + #else + // unless there's no temperature sensor... then just do voltage + adc_step = 0; + #endif + + #if defined(TICK_DURING_STANDBY) && defined(USE_SLEEP_LVP) // in sleep mode, turn off after just one measurement // (having the ADC on raises standby power by about 250 uA) // (and the usual standby level is only ~20 uA) - if (go_to_standby) ADC_off(); + if (go_to_standby) { + ADC_off(); + // also, only check the battery while asleep, not the temperature + adc_channel = 0; + } #endif - // what is being measured? 0 = battery voltage, 1 = temperature - static uint8_t adc_step = 0; + if (0) {} // placeholder for easier syntax #ifdef USE_LVP - if (0 == adc_step) { // voltage + else if (0 == adc_step) { // voltage ADC_voltage_handler(); + #ifdef USE_THERMAL_REGULATION + // set the correct type of measurement for next time + if (! go_to_standby) set_admux_therm(); + #endif } #endif #ifdef USE_THERMAL_REGULATION else if (1 == adc_step) { // temperature ADC_temperature_handler(); - } - #endif - - #if defined(TICK_DURING_STANDBY) && defined(USE_SLEEP_LVP) - // only measure battery voltage while asleep - if (go_to_standby) adc_step = 0; - else - #endif - - adc_step = (adc_step + 1) & (ADC_STEPS-1); - - // set the correct type of measurement for next time - #ifdef USE_THERMAL_REGULATION - #ifdef USE_LVP - if (0 == adc_step) set_admux_voltage(); - else set_admux_therm(); - #else - //set_admux_therm(); - #error "USE_THERMAL_REGULATION set without USE_LVP" - #endif - #else #ifdef USE_LVP + // set the correct type of measurement for next time set_admux_voltage(); #endif + } #endif - - irq_adc_stable = 0; // first result is unstable } #ifdef USE_LVP static inline void ADC_voltage_handler() { + // rate-limit low-voltage warnings to a max of 1 per N seconds static uint8_t lvp_timer = 0; - static uint8_t lvp_lowpass = 0; #define LVP_TIMER_START (VOLTAGE_WARNING_SECONDS*ADC_CYCLES_PER_SECOND) // N seconds between LVP warnings - #define LVP_LOWPASS_STRENGTH ADC_CYCLES_PER_SECOND // lowpass for one second - uint16_t measurement = adc_values[0]; // latest 10-bit ADC reading + uint16_t measurement; - #ifdef USE_VOLTAGE_LOWPASS - static uint16_t prev_measurement = 0; - - // prime on first execution, or while asleep - if (go_to_standby || (! prev_measurement)) prev_measurement = measurement; - - // only allow raw value to go up or down by 1 per iteration - if (measurement > prev_measurement) measurement = prev_measurement + 1; - else if (measurement < prev_measurement) measurement = prev_measurement - 1; - - // remember for later - prev_measurement = measurement; - #endif // no USE_VOLTAGE_LOWPASS + // latest ADC value + if (go_to_standby || (adc_smooth[0] < 255)) { + measurement = adc_raw[0]; + adc_smooth[0] = measurement; // no lowpass while asleep + } + else measurement = adc_smooth[0]; + + // values stair-step between intervals of 64, with random variations + // of 1 or 2 in either direction, so if we chop off the last 6 bits + // it'll flap between N and N-1... but if we add half an interval, + // the values should be really stable after right-alignment + // (instead of 99.98, 100.00, and 100.02, it'll hit values like + // 100.48, 100.50, and 100.52... which are stable when truncated) + //measurement += 32; + //measurement = (measurement + 16) >> 5; + measurement = (measurement + 16) & 0xffe0; // 1111 1111 1110 0000 #ifdef USE_VOLTAGE_DIVIDER voltage = calc_voltage_divider(measurement); @@ -228,32 +256,19 @@ static inline void ADC_voltage_handler() { // calculate actual voltage: volts * 10 // ADC = 1.1 * 1024 / volts // volts = 1.1 * 1024 / ADC - //voltage = (uint16_t)(1.1*1024*10)/measurement + VOLTAGE_FUDGE_FACTOR; - voltage = ((uint16_t)(2*1.1*1024*10)/measurement + VOLTAGE_FUDGE_FACTOR) >> 1; + voltage = ((uint16_t)(2*1.1*1024*10)/(measurement>>6) + VOLTAGE_FUDGE_FACTOR) >> 1; #endif // if low, callback EV_voltage_low / EV_voltage_critical - // (but only if it has been more than N ticks since last call) + // (but only if it has been more than N seconds since last call) if (lvp_timer) { lvp_timer --; } else { // it has been long enough since the last warning if (voltage < VOLTAGE_LOW) { - if (lvp_lowpass < LVP_LOWPASS_STRENGTH) { - lvp_lowpass ++; - } else { - // try to send out a warning - //uint8_t err = emit(EV_voltage_low, 0); - //uint8_t err = emit_now(EV_voltage_low, 0); - emit(EV_voltage_low, 0); - //if (!err) { - // on successful warning, reset counters - lvp_timer = LVP_TIMER_START; - lvp_lowpass = 0; - //} - } - } else { - // voltage not low? reset count - lvp_lowpass = 0; + // send out a warning + emit(EV_voltage_low, 0); + // reset rate-limit counter + lvp_timer = LVP_TIMER_START; } } } @@ -261,146 +276,141 @@ static inline void ADC_voltage_handler() { #ifdef USE_THERMAL_REGULATION +// generally happens once per second while awake static inline void ADC_temperature_handler() { - // thermal declarations - #ifndef THERMAL_UPDATE_SPEED - #define THERMAL_UPDATE_SPEED 2 + // coarse adjustment + #ifndef THERM_LOOKAHEAD + #define THERM_LOOKAHEAD 4 // can be tweaked per build target #endif - #define NUM_THERMAL_VALUES_HISTORY 8 - static uint8_t history_step = 0; // don't update history as often - static int16_t temperature_history[NUM_THERMAL_VALUES_HISTORY]; - static uint8_t temperature_timer = 0; - static uint8_t overheat_lowpass = 0; - static uint8_t underheat_lowpass = 0; - #define TEMPERATURE_TIMER_START ((THERMAL_WARNING_SECONDS-2)*ADC_CYCLES_PER_SECOND) // N seconds between thermal regulation events - #define OVERHEAT_LOWPASS_STRENGTH (ADC_CYCLES_PER_SECOND*2) // lowpass for 2 seconds - #define UNDERHEAT_LOWPASS_STRENGTH (ADC_CYCLES_PER_SECOND*2) // lowpass for 2 seconds - - // TODO: left-shift this so the lowpass can get higher resolution - // TODO: increase the sampling rate, to keep the lowpass from lagging - uint16_t measurement = adc_values[1]; // latest 10-bit ADC reading + // reduce frequency of minor warnings + #ifndef THERM_NEXT_WARNING_THRESHOLD + #define THERM_NEXT_WARNING_THRESHOLD 24 + #endif + // fine-grained adjustment + // how proportional should the adjustments be? (not used yet) + #ifndef THERM_RESPONSE_MAGNITUDE + #define THERM_RESPONSE_MAGNITUDE 128 + #endif + // acceptable temperature window size in C + #define THERM_WINDOW_SIZE 2 + + // TODO: make this configurable per build target? + // (shorter time for hosts with a lower power-to-mass ratio) + // (because then it'll have smaller responses) + #define NUM_TEMP_HISTORY_STEPS 8 // don't change; it'll break stuff + static uint8_t history_step = 0; + static uint16_t temperature_history[NUM_TEMP_HISTORY_STEPS]; + static int8_t warning_threshold = 0; + + if (reset_thermal_history) { // wipe out old data + // don't keep resetting + reset_thermal_history = 0; - // Convert ADC units to Celsius (ish) - int16_t temp = measurement - 275 + THERM_CAL_OFFSET + (int16_t)therm_cal_offset; + // ignore average, use latest sample + uint16_t foo = adc_raw[1]; + adc_smooth[1] = foo; - // prime on first execution - if (reset_thermal_history) { - reset_thermal_history = 0; - temperature = temp; - for(uint8_t i=0; i<NUM_THERMAL_VALUES_HISTORY; i++) - temperature_history[i] = temp; - } else { // update our current temperature estimate - // crude lowpass filter - // (limit rate of change to 1 degree per measurement) - if (temp > temperature) { - temperature ++; - } else if (temp < temperature) { - temperature --; - } + // forget any past measurements + for(uint8_t i=0; i<NUM_TEMP_HISTORY_STEPS; i++) + temperature_history[i] = (foo + 16) >> 5; } - // guess what the temperature will be in a few seconds - int16_t pt; - { - int16_t diff; - int16_t t = temperature; + // latest 16-bit ADC reading + uint16_t measurement = adc_smooth[1]; - // algorithm tweaking; not really intended to be modified - // how far ahead should we predict? - #ifndef THERM_PREDICTION_STRENGTH - #define THERM_PREDICTION_STRENGTH 4 - #endif - // how proportional should the adjustments be? (not used yet) - #ifndef THERM_RESPONSE_MAGNITUDE - #define THERM_RESPONSE_MAGNITUDE 128 - #endif - // acceptable temperature window size in C - #define THERM_WINDOW_SIZE 5 - // highest temperature allowed - #define THERM_CEIL ((int16_t)therm_ceil) - // bottom of target temperature window - #define THERM_FLOOR (THERM_CEIL - THERM_WINDOW_SIZE) - - // if it's time to rotate the thermal history, do it - history_step ++; - #if (THERMAL_UPDATE_SPEED == 4) // new value every 4s - #define THERM_HISTORY_STEP_MAX (4*ADC_CYCLES_PER_SECOND) - #elif (THERMAL_UPDATE_SPEED == 2) // new value every 2s - #define THERM_HISTORY_STEP_MAX (2*ADC_CYCLES_PER_SECOND) - #elif (THERMAL_UPDATE_SPEED == 1) // new value every 1s - #define THERM_HISTORY_STEP_MAX (ADC_CYCLES_PER_SECOND) - #elif (THERMAL_UPDATE_SPEED == 0) // new value every 0.5s - #define THERM_HISTORY_STEP_MAX (ADC_CYCLES_PER_SECOND/2) - #endif - if (THERM_HISTORY_STEP_MAX == history_step) { - history_step = 0; - // rotate measurements and add a new one - for (uint8_t i=0; i<NUM_THERMAL_VALUES_HISTORY-1; i++) { - temperature_history[i] = temperature_history[i+1]; - } - temperature_history[NUM_THERMAL_VALUES_HISTORY-1] = t; - } + // values stair-step between intervals of 64, with random variations + // of 1 or 2 in either direction, so if we chop off the last 6 bits + // it'll flap between N and N-1... but if we add half an interval, + // the values should be really stable after right-alignment + // (instead of 99.98, 100.00, and 100.02, it'll hit values like + // 100.48, 100.50, and 100.52... which are stable when truncated) + //measurement += 32; + measurement = (measurement + 16) >> 5; + //measurement = (measurement + 16) & 0xffe0; // 1111 1111 1110 0000 - // guess what the temp will be several seconds in the future - // diff = rate of temperature change - //diff = temperature_history[NUM_THERMAL_VALUES_HISTORY-1] - temperature_history[0]; - diff = t - temperature_history[0]; - // slight bias toward zero; ignore very small changes (noise) - for (uint8_t z=0; z<3; z++) { - if (diff < 0) diff ++; - if (diff > 0) diff --; + // let the UI see the current temperature in C + // Convert ADC units to Celsius (ish) + temperature = (measurement>>1) + THERM_CAL_OFFSET + (int16_t)therm_cal_offset - 275; + + // how much has the temperature changed between now and a few seconds ago? + int16_t diff; + diff = measurement - temperature_history[history_step]; + + // update / rotate the temperature history + temperature_history[history_step] = measurement; + history_step = (history_step + 1) & (NUM_TEMP_HISTORY_STEPS-1); + + // PI[D]: guess what the temperature will be in a few seconds + uint16_t pt; // predicted temperature + pt = measurement + (diff * THERM_LOOKAHEAD); + + // convert temperature limit from C to raw 16-bit ADC units + // C = (ADC>>6) - 275 + THERM_CAL_OFFSET + therm_cal_offset; + // ... so ... + // (C + 275 - THERM_CAL_OFFSET - therm_cal_offset) << 6 = ADC; + uint16_t ceil = (therm_ceil + 275 - therm_cal_offset - THERM_CAL_OFFSET) << 1; + int16_t offset = pt - ceil; + + // bias small errors toward zero, while leaving large errors mostly unaffected + // (a diff of 1 C is 2 ADC units, * 4 for therm lookahead, so it becomes 8) + // (but a diff of 1 C should only send a warning of magnitude 1) + // (this also makes it only respond to small errors at the time the error + // happened, not after the temperature has stabilized) + for(uint8_t foo=0; foo<5; foo++) { + if (offset > 0) { + offset --; + } else if (offset < 0) { + offset ++; } - // projected_temperature = current temp extended forward by amplified rate of change - //projected_temperature = temperature_history[NUM_THERMAL_VALUES_HISTORY-1] + (diff<<THERM_PREDICTION_STRENGTH); - pt = projected_temperature = t + (diff<<THERM_PREDICTION_STRENGTH); - } - - // cancel counters if appropriate - if (pt > THERM_FLOOR) { - underheat_lowpass = 0; // we're probably not too cold - } - if (pt < THERM_CEIL) { - overheat_lowpass = 0; // we're probably not too hot } - if (temperature_timer) { - temperature_timer --; - } else { // it has been long enough since the last warning - - // Too hot? - if (pt > THERM_CEIL) { - if (overheat_lowpass < OVERHEAT_LOWPASS_STRENGTH) { - overheat_lowpass ++; - } else { - // reset counters - overheat_lowpass = 0; - temperature_timer = TEMPERATURE_TIMER_START; - // how far above the ceiling? - //int16_t howmuch = (pt - THERM_CEIL) * THERM_RESPONSE_MAGNITUDE / 128; - int16_t howmuch = pt - THERM_CEIL; - // try to send out a warning - emit(EV_temperature_high, howmuch); - } + // Too hot? + // (if it's too hot and still getting warmer...) + if ((offset > 0) && (diff > 0)) { + // accumulated error isn't big enough yet to send a warning + if (warning_threshold > 0) { + warning_threshold -= offset; + } else { // error is big enough; send a warning + warning_threshold = THERM_NEXT_WARNING_THRESHOLD - offset; + + // how far above the ceiling? + //int16_t howmuch = offset * THERM_RESPONSE_MAGNITUDE / 128; + int16_t howmuch = offset; + // send a warning + emit(EV_temperature_high, howmuch); } + } - // Too cold? - else if (pt < THERM_FLOOR) { - if (underheat_lowpass < UNDERHEAT_LOWPASS_STRENGTH) { - underheat_lowpass ++; - } else { - // reset counters - underheat_lowpass = 0; - temperature_timer = TEMPERATURE_TIMER_START; - // how far below the floor? - //int16_t howmuch = (THERM_FLOOR - pt) * THERM_RESPONSE_MAGNITUDE / 128; - int16_t howmuch = THERM_FLOOR - pt; - // try to send out a warning (unless voltage is low) - // (LVP and underheat warnings fight each other) - if (voltage > VOLTAGE_LOW) - emit(EV_temperature_low, howmuch); - } + // Too cold? + // (if it's too cold and still getting colder...) + // the temperature is this far below the floor: + #define BELOW (offset + (THERM_WINDOW_SIZE<<1)) + else if ((BELOW < 0) && (diff < 0)) { + // accumulated error isn't big enough yet to send a warning + if (warning_threshold < 0) { + warning_threshold -= BELOW; + } else { // error is big enough; send a warning + warning_threshold = (-THERM_NEXT_WARNING_THRESHOLD) - BELOW; + + // how far below the floor? + // int16_t howmuch = ((-BELOW) >> 1) * THERM_RESPONSE_MAGNITUDE / 128; + int16_t howmuch = (-BELOW) >> 1; + // send a notification (unless voltage is low) + // (LVP and underheat warnings fight each other) + if (voltage > (VOLTAGE_LOW + 1)) + emit(EV_temperature_low, howmuch); } } + #undef BELOW + + // Goldilocks? + // (temperature is within target window, or at least heading toward it) + else { + // send a notification (unless voltage is low) + // (LVP and temp-okay events fight each other) + if (voltage > VOLTAGE_LOW) + emit(EV_temperature_okay, 0); + } } #endif |