diff options
Diffstat (limited to 'spaghetti-monster')
| -rw-r--r-- | spaghetti-monster/anduril/cfg-noctigon-k1-sbt90.h | 61 |
1 files changed, 49 insertions, 12 deletions
diff --git a/spaghetti-monster/anduril/cfg-noctigon-k1-sbt90.h b/spaghetti-monster/anduril/cfg-noctigon-k1-sbt90.h index 81063fa..568ff95 100644 --- a/spaghetti-monster/anduril/cfg-noctigon-k1-sbt90.h +++ b/spaghetti-monster/anduril/cfg-noctigon-k1-sbt90.h @@ -5,7 +5,7 @@ // (is a K1 host with a KR4-like driver and a really high-powered LED) #define MODEL_NUMBER "0252" -#include "hwdef-Noctigon_K1-SBT90.h" +#include "hwdef-noctigon-k1-sbt90.h" #include "hank-cfg.h" // ATTINY: 1634 @@ -15,7 +15,7 @@ // this light has three aux LED channels: R, G, B #define USE_AUX_RGB_LEDS -#define USE_AUX_RGB_LEDS_WHILE_ON +#define USE_AUX_RGB_LEDS_WHILE_ON 10 #define USE_INDICATOR_LED_WHILE_RAMPING @@ -24,36 +24,73 @@ // 1/1023: 2.56 lm // max regulated: 1740 lm // FET: ~3700 lm +#define RAMP_SIZE 150 +// FIXME: it should probably have max_regulated at 120, not 130 +// ramp copied from noctigon-kr4 +// nice low lows, but might have visible ripple on some lights: +// maxreg at 130, dynamic PWM: level_calc.py 5.01 2 149 7135 1 0.3 1740 FET 1 10 3190 --pwm dyn:64:16384:255 +// (plus one extra level at the beginning for moon) +#define PWM1_LEVELS 0,1,1,2,2,3,4,5,6,7,8,9,11,12,14,16,17,19,22,24,26,29,31,34,37,40,43,46,49,53,56,60,63,67,71,74,78,82,86,89,93,96,99,103,105,108,110,112,114,115,116,116,115,114,112,109,106,101,95,89,81,71,60,48,34,19,20,21,22,23,24,26,27,28,30,31,32,34,36,37,39,41,43,45,47,49,51,53,56,58,61,63,66,69,72,75,78,81,84,88,91,95,99,103,107,111,115,119,124,129,133,138,143,149,154,159,165,171,177,183,189,196,203,210,217,224,231,239,247,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0 +#define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,9,20,30,41,52,63,75,87,99,112,125,138,151,165,179,194,208,224,239,255 +#define PWM_TOPS 16383,16383,11750,14690,9183,12439,13615,13955,13877,13560,13093,12529,13291,12513,12756,12769,11893,11747,12085,11725,11329,11316,10851,10713,10518,10282,10016,9729,9428,9298,8971,8794,8459,8257,8043,7715,7497,7275,7052,6753,6538,6260,5994,5798,5501,5271,5006,4758,4525,4268,4030,3775,3508,3263,3010,2752,2517,2256,1998,1763,1512,1249,994,749,497,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255 +#define MIN_THERM_STEPDOWN 66 // should be above highest dyn_pwm level + +#define MAX_1x7135 130 +#define DEFAULT_LEVEL 50 +#define HALFSPEED_LEVEL 12 +#define QUARTERSPEED_LEVEL 4 + +#if 0 // original 10-bit ramp // maxreg at 130: level_calc.py cube 2 150 7135 0 2.5 1740 FET 1 10 2565 // maxreg at 120: level_calc.py cube 2 150 7135 0 2.5 1740 FET 1 10 3190 -#define RAMP_LENGTH 150 #define PWM1_LEVELS 0,0,1,1,2,2,3,3,4,4,5,6,7,8,9,10,11,13,14,15,17,19,20,22,24,26,28,30,33,35,38,40,43,46,49,52,55,59,62,66,70,74,78,82,86,91,96,100,105,111,116,121,127,133,139,145,151,158,165,172,179,186,193,201,209,217,225,234,243,251,261,270,280,289,299,310,320,331,342,353,364,376,388,400,412,425,438,451,464,478,492,506,521,536,551,566,582,597,614,630,647,664,681,699,717,735,754,772,792,811,831,851,871,892,913,935,956,978,1001,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,0 #define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,22,51,79,109,138,168,198,229,260,292,324,357,390,423,457,492,527,562,598,634,671,708,746,784,822,861,901,941,982,1023 #define DEFAULT_LEVEL 46 #define MAX_1x7135 120 #define HALFSPEED_LEVEL 10 #define QUARTERSPEED_LEVEL 2 +#endif -#define RAMP_SMOOTH_FLOOR 3 // level 1 is unreliable -#define RAMP_SMOOTH_CEIL 120 -// 10, 28, [46], 65, 83, 101, [120] -#define RAMP_DISCRETE_FLOOR 10 +#define RAMP_SMOOTH_FLOOR 11 // low levels may be unreliable +#define RAMP_SMOOTH_CEIL 130 +// 11 30 [50] 70 90 110 [130] +#define RAMP_DISCRETE_FLOOR 11 #define RAMP_DISCRETE_CEIL RAMP_SMOOTH_CEIL #define RAMP_DISCRETE_STEPS 7 // safe limit ~33% power #define SIMPLE_UI_FLOOR RAMP_DISCRETE_FLOOR -#define SIMPLE_UI_CEIL 110 +#define SIMPLE_UI_CEIL 120 #define SIMPLE_UI_STEPS 5 // stop panicking at ~40% power or ~1700 lm -#define THERM_FASTER_LEVEL 120 -#define MIN_THERM_STEPDOWN DEFAULT_LEVEL +#define THERM_FASTER_LEVEL 130 //#define THERM_NEXT_WARNING_THRESHOLD 16 // accumulate less error before adjusting //#define THERM_RESPONSE_MAGNITUDE 128 // bigger adjustments -// normal party strobe speed; this driver can pulse very quickly +#define THERM_CAL_OFFSET 5 + +// the power regulator is a bit slow, so push it harder for a quick response from off +// (unsure if necessary, copied from noctigon-kr4) +//#define DEFAULT_JUMP_START_LEVEL 21 +//#define BLINK_BRIGHTNESS DEFAULT_LEVEL +//#define BLINK_ONCE_TIME 12 + +// there is usually no lighted button, so +// blink numbers on the main LEDs by default (but allow user to change it) +#define DEFAULT_BLINK_CHANNEL CM_MAIN + +// normal party strobe speed; this driver can pulse very quickly due to its DD FET //#define PARTY_STROBE_ONTIME 2 -#define THERM_CAL_OFFSET 5 +// the default of 26 looks a bit rough, so increase it to make it smoother +#define CANDLE_AMPLITUDE 33 + +// don't blink while ramping +#ifdef BLINK_AT_RAMP_MIDDLE +#undef BLINK_AT_RAMP_MIDDLE +#endif + +// for compatibility with other models +#define USE_SOFT_FACTORY_RESET |