4 files changed, 192 insertions, 0 deletions
diff --git a/spaghetti-monster/anduril/MODELS b/spaghetti-monster/anduril/MODELS
index a125f53..79a6a4a 100644
--- a/spaghetti-monster/anduril/MODELS
+++ b/spaghetti-monster/anduril/MODELS
@@ -30,6 +30,9 @@ Model	Name                          	MCU
 0265	noctigon-k9.3-tintramp-nofet  	attiny1634
 0266	noctigon-k9.3-tintramp-fet    	attiny1634
 0267	noctigon-k9.3-tintramp-219    	attiny1634
+0271	noctigon-dm11                 	attiny1634
+0272	noctigon-dm11-nofet           	attiny1634
+0273	noctigon-dm11-12v             	attiny1634
 0311	fw3a                          	attiny85
 0312	fw3a-219                      	attiny85
 0313	fw3a-nofet                    	attiny85
diff --git a/spaghetti-monster/anduril/cfg-noctigon-dm11-12v.h b/spaghetti-monster/anduril/cfg-noctigon-dm11-12v.h
new file mode 100644
index 0000000..3e7c1d3
--- /dev/null
+++ b/spaghetti-monster/anduril/cfg-noctigon-dm11-12v.h
@@ -0,0 +1,74 @@
+// Noctigon DM11 (12V) config options for Anduril
+#define MODEL_NUMBER "0273"
+#include "hwdef-Noctigon_DM11-12V.h"
+#include "hank-cfg.h"
+// ATTINY: 1634
+
+// this light has three aux LED channels: R, G, B
+#define USE_AUX_RGB_LEDS
+// ... and a single LED in the button
+#define USE_BUTTON_LED
+// don't use aux LEDs while main LED is on
+#ifdef USE_INDICATOR_LED_WHILE_RAMPING
+#undef USE_INDICATOR_LED_WHILE_RAMPING
+#endif
+
+
+// power channels:
+// - linear: 5A?
+// - DD FET: none (can't do DD on a boost driver)
+#define RAMP_LENGTH 150
+#define USE_DYN_PWM
+
+// level_calc.py 5.01 1 149 7135 1 0.3 1740 --pwm dyn:78:16384:255
+// (plus a 0 at the beginning for moon)
+#define PWM1_LEVELS 0,1,1,1,2,3,3,4,5,6,7,8,9,10,11,13,14,16,17,19,21,23,25,27,29,31,34,36,39,42,44,47,50,53,57,60,63,67,70,74,77,81,85,88,92,96,99,103,107,110,113,117,120,123,126,128,130,133,134,136,137,137,137,137,136,135,133,130,126,122,117,111,104,96,87,76,65,52,38,22,23,25,26,27,28,29,30,32,33,34,36,37,39,40,42,43,45,47,49,51,53,55,57,59,61,63,66,68,70,73,76,78,81,84,87,90,93,96,99,103,106,110,113,117,121,125,129,133,137,142,146,151,155,160,165,170,175,181,186,192,197,203,209,215,222,228,234,241,248,255
+#define PWM_TOPS 16383,16383,12404,8140,11462,14700,11041,12947,13795,14111,14124,13946,13641,13248,12791,13418,12808,13057,12385,12428,12358,12209,12000,11746,11459,11147,11158,10793,10708,10576,10173,9998,9800,9585,9527,9278,9023,8901,8634,8486,8216,8053,7881,7615,7440,7261,7009,6832,6656,6422,6196,6031,5819,5615,5419,5190,4973,4803,4571,4386,4179,3955,3745,3549,3340,3145,2940,2729,2513,2312,2109,1903,1697,1491,1286,1070,871,662,459,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255
+
+#define DEFAULT_LEVEL 70
+#define MAX_1x7135 150
+#define HALFSPEED_LEVEL 12
+#define QUARTERSPEED_LEVEL 4
+
+// don't blink halfway up
+#ifdef BLINK_AT_RAMP_MIDDLE
+#undef BLINK_AT_RAMP_MIDDLE
+#endif
+
+#define RAMP_SMOOTH_FLOOR 10  // low levels may be unreliable
+#define RAMP_SMOOTH_CEIL  130
+// 10, 30, 50, [70], 90, 110, 130
+// Nichia B35 model: (0.56), 1.4, 8.4, 34.5, [102], 250, 500, 860, (1300) lm
+#define RAMP_DISCRETE_FLOOR 10
+#define RAMP_DISCRETE_CEIL  RAMP_SMOOTH_CEIL
+#define RAMP_DISCRETE_STEPS 7
+
+// safe limit ~75% power
+#define SIMPLE_UI_FLOOR RAMP_DISCRETE_FLOOR
+#define SIMPLE_UI_CEIL RAMP_DISCRETE_CEIL
+#define SIMPLE_UI_STEPS 5
+
+// make candle mode wobble more
+#define CANDLE_AMPLITUDE 33
+
+// stop panicking at ~70% power or ~600 lm
+#define THERM_FASTER_LEVEL 130
+#define MIN_THERM_STEPDOWN 80  // must be > end of dynamic PWM range
+
+//#define THERM_RESPONSE_MAGNITUDE 32  // smaller adjustments, this host changes temperature slowly
+//#define THERM_NEXT_WARNING_THRESHOLD 32  // more error tolerance before adjusting
+
+// slow down party strobe; this driver can't pulse for 2ms or less
+#define PARTY_STROBE_ONTIME 3
+
+#define THERM_CAL_OFFSET 5
+
+// the power regulator seems to "jump start" the LEDs all on its own,
+// so the firmware doesn't have to
+// (and unfortunately the power regulator jumps it a bit too hard)
+#define DEFAULT_JUMP_START_LEVEL 1
+#define BLINK_BRIGHTNESS 50
+#define BLINK_ONCE_TIME 12
+
+// added for convenience
+#define USE_SOFT_FACTORY_RESET
diff --git a/spaghetti-monster/anduril/cfg-noctigon-dm11-nofet.h b/spaghetti-monster/anduril/cfg-noctigon-dm11-nofet.h
new file mode 100644
index 0000000..5a828d6
--- /dev/null
+++ b/spaghetti-monster/anduril/cfg-noctigon-dm11-nofet.h
@@ -0,0 +1,42 @@
+// Noctigon DM11-noFET config options for Anduril
+#include "cfg-noctigon-dm11.h"
+#undef MODEL_NUMBER
+#define MODEL_NUMBER "0272"
+// ATTINY: 1634
+
+// turn off the DD FET
+#undef PWM_CHANNELS
+#define PWM_CHANNELS 1
+
+// level_calc.py 5.01 1 149 7135 1 0.3 1740 --pwm dyn:78:16384:255
+#undef PWM1_LEVELS
+#define PWM1_LEVELS 0,1,1,1,2,3,3,4,5,6,7,8,9,10,11,13,14,16,17,19,21,23,25,27,29,31,34,36,39,42,44,47,50,53,57,60,63,67,70,74,77,81,85,88,92,96,99,103,107,110,113,117,120,123,126,128,130,133,134,136,137,137,137,137,136,135,133,130,126,122,117,111,104,96,87,76,65,52,38,22,23,25,26,27,28,29,30,32,33,34,36,37,39,40,42,43,45,47,49,51,53,55,57,59,61,63,66,68,70,73,76,78,81,84,87,90,93,96,99,103,106,110,113,117,121,125,129,133,137,142,146,151,155,160,165,170,175,181,186,192,197,203,209,215,222,228,234,241,248,255
+#undef PWM2_LEVELS
+#undef PWM_TOPS
+#define PWM_TOPS 16383,16383,12404,8140,11462,14700,11041,12947,13795,14111,14124,13946,13641,13248,12791,13418,12808,13057,12385,12428,12358,12209,12000,11746,11459,11147,11158,10793,10708,10576,10173,9998,9800,9585,9527,9278,9023,8901,8634,8486,8216,8053,7881,7615,7440,7261,7009,6832,6656,6422,6196,6031,5819,5615,5419,5190,4973,4803,4571,4386,4179,3955,3745,3549,3340,3145,2940,2729,2513,2312,2109,1903,1697,1491,1286,1070,871,662,459,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255
+#undef DEFAULT_LEVEL
+#define DEFAULT_LEVEL 70
+#undef MAX_1x7135
+#define MAX_1x7135 150
+
+// make candle mode wobble more
+#ifdef CANDLE_AMPLITUDE
+#undef CANDLE_AMPLITUDE
+#endif
+#define CANDLE_AMPLITUDE 33
+
+
+// slow down party strobe; this driver can't pulse for 1ms or less
+// (only needed on no-FET build)
+#define PARTY_STROBE_ONTIME 2
+
+// jump start a bit higher than base driver
+#undef DEFAULT_JUMP_START_LEVEL
+#define DEFAULT_JUMP_START_LEVEL 25
+
+// stop panicking at ~70% power or ~600 lm
+#undef THERM_FASTER_LEVEL
+#define THERM_FASTER_LEVEL 130
+#undef MIN_THERM_STEPDOWN
+#define MIN_THERM_STEPDOWN 80  // must be > end of dynamic PWM range
+
diff --git a/spaghetti-monster/anduril/cfg-noctigon-dm11.h b/spaghetti-monster/anduril/cfg-noctigon-dm11.h
new file mode 100644
index 0000000..794ae2b
--- /dev/null
+++ b/spaghetti-monster/anduril/cfg-noctigon-dm11.h
@@ -0,0 +1,73 @@
+// Noctigon DM11 config options for Anduril
+#define MODEL_NUMBER "0271"
+#include "hwdef-Noctigon_DM11.h"
+#include "hank-cfg.h"
+// ATTINY: 1634
+
+// this light has three aux LED channels: R, G, B
+#define USE_AUX_RGB_LEDS
+// ... and a single LED in the button
+#define USE_BUTTON_LED
+// don't use aux LEDs while main LED is on
+#ifdef USE_INDICATOR_LED_WHILE_RAMPING
+#undef USE_INDICATOR_LED_WHILE_RAMPING
+#endif
+
+
+// power channels:
+// - linear: 5A?
+// - FET: DD
+#define RAMP_LENGTH 150
+#define USE_DYN_PWM
+
+// maxreg at 130, dynamic PWM: level_calc.py 5.01 2 149 7135 1 0.3 1740 FET 1 10 3190 --pwm dyn:64:16384:255
+// (plus one extra level at the beginning for moon)
+#define PWM1_LEVELS 0,1,1,2,2,3,4,5,6,7,8,9,11,12,14,16,17,19,22,24,26,29,31,34,37,40,43,46,49,53,56,60,63,67,71,74,78,82,86,89,93,96,99,103,105,108,110,112,114,115,116,116,115,114,112,109,106,101,95,89,81,71,60,48,34,19,20,21,22,23,24,26,27,28,30,31,32,34,36,37,39,41,43,45,47,49,51,53,56,58,61,63,66,69,72,75,78,81,84,88,91,95,99,103,107,111,115,119,124,129,133,138,143,149,154,159,165,171,177,183,189,196,203,210,217,224,231,239,247,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0
+#define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,9,20,30,41,52,63,75,87,99,112,125,138,151,165,179,194,208,224,239,255
+#define PWM_TOPS 16383,16383,11750,14690,9183,12439,13615,13955,13877,13560,13093,12529,13291,12513,12756,12769,11893,11747,12085,11725,11329,11316,10851,10713,10518,10282,10016,9729,9428,9298,8971,8794,8459,8257,8043,7715,7497,7275,7052,6753,6538,6260,5994,5798,5501,5271,5006,4758,4525,4268,4030,3775,3508,3263,3010,2752,2517,2256,1998,1763,1512,1249,994,749,497,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255
+
+#define DEFAULT_LEVEL 70
+#define MAX_1x7135 130
+#define HALFSPEED_LEVEL 12
+#define QUARTERSPEED_LEVEL 4
+
+// don't blink halfway up
+#ifdef BLINK_AT_RAMP_MIDDLE
+#undef BLINK_AT_RAMP_MIDDLE
+#endif
+
+#define RAMP_SMOOTH_FLOOR 10  // low levels may be unreliable
+#define RAMP_SMOOTH_CEIL  130
+// 10, 30, 50, [70], 90, 110, 130
+#define RAMP_DISCRETE_FLOOR 10
+#define RAMP_DISCRETE_CEIL  RAMP_SMOOTH_CEIL
+#define RAMP_DISCRETE_STEPS 7
+
+// safe limit ~75% power
+#define SIMPLE_UI_FLOOR RAMP_DISCRETE_FLOOR
+#define SIMPLE_UI_CEIL RAMP_DISCRETE_CEIL
+#define SIMPLE_UI_STEPS 5
+
+// make candle mode wobble more
+#define CANDLE_AMPLITUDE 30
+
+// stop panicking at ~70% power or ~600 lm
+#define THERM_FASTER_LEVEL 130
+#define MIN_THERM_STEPDOWN 66  // must be > end of dynamic PWM range
+
+//#define THERM_RESPONSE_MAGNITUDE 32  // smaller adjustments, this host changes temperature slowly
+//#define THERM_NEXT_WARNING_THRESHOLD 32  // more error tolerance before adjusting
+
+// slow down party strobe; this driver can't pulse for 1ms or less
+// (only needed on no-FET build)
+//#define PARTY_STROBE_ONTIME 2
+
+#define THERM_CAL_OFFSET 5
+
+// the power regulator is a bit slow, so push it harder for a quick response from off
+#define DEFAULT_JUMP_START_LEVEL 21
+#define BLINK_BRIGHTNESS 50
+#define BLINK_ONCE_TIME 12
+
+// added for convenience
+#define USE_SOFT_FACTORY_RESET