diff options
Diffstat (limited to 'spaghetti-monster')
| -rw-r--r-- | spaghetti-monster/anduril/cfg-thefreeman-boost21-6a.h | 116 |
1 files changed, 116 insertions, 0 deletions
diff --git a/spaghetti-monster/anduril/cfg-thefreeman-boost21-6a.h b/spaghetti-monster/anduril/cfg-thefreeman-boost21-6a.h new file mode 100644 index 0000000..76ea9ab --- /dev/null +++ b/spaghetti-monster/anduril/cfg-thefreeman-boost21-6a.h @@ -0,0 +1,116 @@ +// thefreeman's BST21 BST20-FWxA (no button LED) +// Copyright (C) 2023 TBD (thefreeman), Selene ToyKeeper +// SPDX-License-Identifier: GPL-3.0-or-later +#pragma once + +#define MODEL_NUMBER "1631" +#include "hwdef-thefreeman-boost21-mp3431-hdr-dac-argb.h" +// ATTINY: 1616 + +// HPRsense : 1.7+0.3+5 = 7mR (DMN22M5UFG+trace resistance+5mR) +// Vsense=42.46mV, R1= 191k +// LPRsense : 1R +// transition DAC level 8, ramp level 45 +// fifth power ramp 0.1mA to 6066mA + +#define RAMP_SIZE 150 + +// 4 ramp segments: +// - low 0.55V +// - low 2.5V +// - high 0.55V +// - high 2.5V +// PWM1: DAC Data +#define PWM1_LEVELS 2, 3, 4, 5, 7, 9, 11, 13, 16, 19, 23, 28, 33, 39, 45, 53, 61, 71, 81, 93,106,121,137,155,175,196,220,246, \ + 60, 67, 74, 82, 91,100,110,121,133,146,159,174,190,207,224,244, \ + 8, 9, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 20, 21, 23, 24, 26, 27, 29, 31, 33, 35, 37, 40, 42, 45, 47, 50, 53, 56, 59, 62, 66, 69, 73, 77, 81, 85, 90, 94, 99,104,109,114,120,126,132,138,144,151,158,165,173,180,188,196,205,214,223,232,242,252, \ + 57, 60, 62, 65, 67, 70, 73, 76, 78, 82, 85, 88, 91, 95, 98,102,105,109,113,117,121,126,130,135,139,144,149,154,159,164,170,175,181,187,193,199,206,212,219,225,232,240,247,255 +// PWM Tops: VREF selector (0.55V=16,1.1V=17, 2.5V=18, 4.3V=19, 1.5V=20) +#define PWM_TOPS 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, \ + 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, \ + 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, \ + 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18 + +#define MAX_1x7135 44 +#define DEFAULT_LEVEL 44 +#define HDR_ENABLE_LEVEL_MIN 45 // when HDR FET turns ON + +// no PWM, so MCU clock speed can be slow +#define HALFSPEED_LEVEL 41 +#define QUARTERSPEED_LEVEL 40 // seems to run fine at 10kHz/4, try reducing more + +#define RAMP_SMOOTH_FLOOR 1 +#define RAMP_SMOOTH_CEIL 130 // 50% / 3A / 1000 lm +// 1 22 [44] 65 87 108 130 +#define RAMP_DISCRETE_FLOOR 1 +#define RAMP_DISCRETE_CEIL 130 +#define RAMP_DISCRETE_STEPS 7 + +// 20 [45] 70 95 120 +#define SIMPLE_UI_FLOOR 20 +#define SIMPLE_UI_CEIL 120 // ~2.25A / ~750 lm +#define SIMPLE_UI_STEPS 5 + +// don't blink mid-ramp +#ifdef BLINK_AT_RAMP_MIDDLE +#undef BLINK_AT_RAMP_MIDDLE +#endif + +// thermal config + +// temperature limit +#define THERM_FASTER_LEVEL 130 // stop panicking at 50%/3A +#define MIN_THERM_STEPDOWN MAX_1x7135 + +//#define THERM_LOOKAHEAD 4 // 4 by default -> decrease for longer turbo +#define THERM_NEXT_WARNING_THRESHOLD 48 // 24 by default -> increase for fewer adjustments (more stable output on large time scale) +#define THERM_RESPONSE_MAGNITUDE 32 // 64 by default -> decrease for smaller adjustments (removes dip post turbo) +//#define THERM_WINDOW_SIZE 1 // 2 by default -> decrease for tighter temperature regulation + + +// UI + +//#define SIMPLE_UI_ACTIVE 1 // advanced UI by default + +// allow Aux Config and Strobe Modes in Simple UI +#define USE_EXTENDED_SIMPLE_UI + +// Allow 3C in Simple UI for switching between smooth and stepped ramping +#define USE_SIMPLE_UI_RAMPING_TOGGLE + +#define DEFAULT_2C_STYLE 1 // enable 2 click turbo + + +// AUX + +//#define USE_BUTTON_LED + +// this light has three aux LED channels: R, G, B +#define USE_AUX_RGB_LEDS + +// show each channel while it scroll by in the menu +#define USE_CONFIG_COLORS + +// blink numbers on the main LEDs by default +#define DEFAULT_BLINK_CHANNEL CM_MAIN + +// use aux red + aux blue for police strobe +#define USE_POLICE_COLOR_STROBE_MODE +#define POLICE_STROBE_USES_AUX +#define POLICE_COLOR_STROBE_CH1 CM_AUXRED +#define POLICE_COLOR_STROBE_CH2 CM_AUXBLU + +// the aux LEDs are front-facing, so turn them off while main LEDs are on +#ifdef USE_INDICATOR_LED_WHILE_RAMPING +#undef USE_INDICATOR_LED_WHILE_RAMPING +#endif + + +// Misc + +#define PARTY_STROBE_ONTIME 1 // slow down party strobe +#define STROBE_OFF_LEVEL 1 // keep the regulator chip on between pulses + +// enable 13H factory reset so it can be used on tail e-switch lights +#define USE_SOFT_FACTORY_RESET + |