diff options
Diffstat (limited to 'spaghetti-monster')
| -rw-r--r-- | spaghetti-monster/anduril.c | 65 | ||||
| -rw-r--r-- | spaghetti-monster/anduril.txt | 2 |
2 files changed, 48 insertions, 19 deletions
diff --git a/spaghetti-monster/anduril.c b/spaghetti-monster/anduril.c index 0b4241d..fc6805c 100644 --- a/spaghetti-monster/anduril.c +++ b/spaghetti-monster/anduril.c @@ -30,6 +30,8 @@ #define BATTCHECK_VpT #define RAMP_LENGTH 150 #define MAX_CLICKS 6 +#define USE_EEPROM +#define EEPROM_BYTES 8 #include "spaghetti-monster.h" // FSM states @@ -50,15 +52,18 @@ volatile uint8_t number_entry_value; void blink_confirm(uint8_t num); +void load_config(); +void save_config(); + // brightness control uint8_t memorized_level = MAX_1x7135; // smooth vs discrete ramping volatile uint8_t ramp_style = 0; // 0 = smooth, 1 = discrete volatile uint8_t ramp_smooth_floor = 1; -volatile uint8_t ramp_smooth_ceil = MAX_LEVEL; -volatile uint8_t ramp_discrete_floor = 20; -volatile uint8_t ramp_discrete_ceil = MAX_LEVEL - 50; -volatile uint8_t ramp_discrete_steps = 3; +volatile uint8_t ramp_smooth_ceil = MAX_LEVEL - 30; +volatile uint8_t ramp_discrete_floor = 15; +volatile uint8_t ramp_discrete_ceil = MAX_LEVEL - 30; +volatile uint8_t ramp_discrete_steps = 5; uint8_t ramp_discrete_step_size; // don't set this // calculate the nearest ramp level which would be valid at the moment @@ -208,7 +213,7 @@ uint8_t steady_state(EventPtr event, uint16_t arg) { else if (event == EV_3clicks) { ramp_style ^= 1; memorized_level = nearest_level(memorized_level); - //save_config(); + save_config(); set_level(0); delay_4ms(20/4); set_level(memorized_level); @@ -299,11 +304,7 @@ uint8_t strobe_state(EventPtr event, uint16_t arg) { // 2 clicks: toggle party strobe vs tactical strobe else if (event == EV_2clicks) { strobe_type ^= 1; - return MISCHIEF_MANAGED; - } - // 3 clicks: go back to regular modes - else if (event == EV_3clicks) { - set_state(steady_state, memorized_level); + save_config(); return MISCHIEF_MANAGED; } // hold: change speed (go faster) @@ -320,6 +321,12 @@ uint8_t strobe_state(EventPtr event, uint16_t arg) { } return MISCHIEF_MANAGED; } + // release hold: save new strobe speed + else if ((event == EV_click1_hold_release) + || (event == EV_click2_hold_release)) { + save_config(); + return MISCHIEF_MANAGED; + } return EVENT_NOT_HANDLED; } @@ -423,7 +430,7 @@ uint8_t ramp_config_mode(EventPtr event, uint16_t arg) { push_state(number_entry_state, config_step + 1); } else { - // TODO: save_config(); + save_config(); // TODO: blink out some sort of success pattern // return to steady mode set_state(steady_state, memorized_level); @@ -462,13 +469,6 @@ uint8_t ramp_config_mode(EventPtr event, uint16_t arg) { } #endif config_step ++; - /* handled at next EV_tick - if (config_step > num_config_steps) { - // TODO: save_config(); - // exit config mode - set_state(steady_state, memorized_level); - } - */ return MISCHIEF_MANAGED; } return EVENT_NOT_HANDLED; @@ -602,6 +602,33 @@ void blink_confirm(uint8_t num) { } +void load_config() { + if (load_eeprom()) { + ramp_style = eeprom[0]; + ramp_smooth_floor = eeprom[1]; + ramp_smooth_ceil = eeprom[2]; + ramp_discrete_floor = eeprom[3]; + ramp_discrete_ceil = eeprom[4]; + ramp_discrete_steps = eeprom[5]; + strobe_type = eeprom[6]; + strobe_delay = eeprom[7]; + } +} + +void save_config() { + eeprom[0] = ramp_style; + eeprom[1] = ramp_smooth_floor; + eeprom[2] = ramp_smooth_ceil; + eeprom[3] = ramp_discrete_floor; + eeprom[4] = ramp_discrete_ceil; + eeprom[5] = ramp_discrete_steps; + eeprom[6] = strobe_type; + eeprom[7] = strobe_delay; + + save_eeprom(); +} + + void low_voltage() { // "step down" from strobe to something low if (current_state == strobe_state) { @@ -628,6 +655,8 @@ void setup() { delay_4ms(3); set_level(0); + load_config(); + push_state(off_state, 0); } diff --git a/spaghetti-monster/anduril.txt b/spaghetti-monster/anduril.txt index 97f13fa..28d27f9 100644 --- a/spaghetti-monster/anduril.txt +++ b/spaghetti-monster/anduril.txt @@ -62,6 +62,6 @@ Momentary mode: * To exit, disconnect power. (loosen/tighten the tailcap) TODO: - - save settings in eeprom + * save settings in eeprom - a way to blink out the firmware version? - a way to configure indicator LED behavior? |