diff options
Diffstat (limited to 'spaghetti-monster')
| -rw-r--r-- | spaghetti-monster/anduril/anduril.c | 77 |
1 files changed, 77 insertions, 0 deletions
diff --git a/spaghetti-monster/anduril/anduril.c b/spaghetti-monster/anduril/anduril.c index e2e77ef..59d27e5 100644 --- a/spaghetti-monster/anduril/anduril.c +++ b/spaghetti-monster/anduril/anduril.c @@ -36,6 +36,7 @@ #define GOODNIGHT_LEVEL 24 // ~11 lm #define USE_REVERSING //#define START_AT_MEMORIZED_LEVEL +#define USE_INDICATOR_LED /********* Configure SpaghettiMonster *********/ #define USE_DELAY_ZERO @@ -45,7 +46,13 @@ #define USE_BATTCHECK #define MAX_CLICKS 5 #define USE_EEPROM +#ifdef USE_INDICATOR_LED +#define EEPROM_BYTES 13 +#elif defined(USE_THERMAL_REGULATION) #define EEPROM_BYTES 12 +#else +#define EEPROM_BYTES 11 +#endif #ifdef START_AT_MEMORIZED_LEVEL #define USE_EEPROM_WL #define EEPROM_WL_BYTES 1 @@ -92,6 +99,10 @@ volatile uint8_t number_entry_value; void blink_confirm(uint8_t num); +#ifdef USE_INDICATOR_LED +void indicator_led(uint8_t lvl); +#endif + // remember stuff even after battery was changed void load_config(); void save_config(); @@ -115,6 +126,14 @@ volatile uint8_t ramp_discrete_floor = 20; volatile uint8_t ramp_discrete_steps = 7; uint8_t ramp_discrete_step_size; // don't set this +#ifdef USE_INDICATOR_LED +// bits 2-3 control lockout mode +// bits 0-1 control "off" mode +// modes are: 0=off, 1=low, 2=high +// (TODO: 3=blinking) +uint8_t indicator_led_mode = (1<<2) + 2; +#endif + // calculate the nearest ramp level which would be valid at the moment // (is a no-op for smooth ramp, but limits discrete ramp to only the // correct levels for the user's config) @@ -146,6 +165,9 @@ uint8_t off_state(EventPtr event, uint16_t arg) { // turn emitter off when entering state if (event == EV_enter_state) { set_level(0); + #ifdef USE_INDICATOR_LED + indicator_led(indicator_led_mode & 0x03); + #endif // sleep while off (lower power use) go_to_standby = 1; ticks_spent_awake = 0; @@ -658,14 +680,41 @@ uint8_t lockout_state(EventPtr event, uint16_t arg) { // (allow staying awake long enough to exit, but otherwise // be persistent about going back to sleep every few seconds // even if the user keeps pressing the button) + #ifdef USE_INDICATOR_LED + if (event == EV_enter_state) { + indicator_led(indicator_led_mode >> 2); + } else + #endif if (event == EV_tick) { ticks_spent_awake ++; if (ticks_spent_awake > 180) { ticks_spent_awake = 0; go_to_standby = 1; + #ifdef USE_INDICATOR_LED + indicator_led(indicator_led_mode >> 2); + #endif } return MISCHIEF_MANAGED; } + #ifdef USE_INDICATOR_LED + // 3 clicks: rotate through indicator LED modes (lockout mode) + else if (event == EV_3clicks) { + uint8_t mode = indicator_led_mode >> 2; + mode = (mode + 1) % 3; + indicator_led_mode = (mode << 2) + (indicator_led_mode & 0x03); + indicator_led(mode); + save_config(); + return MISCHIEF_MANAGED; + } + // 3 clicks: rotate through indicator LED modes (off mode) + else if (event == EV_click3_hold) { + uint8_t mode = (arg >> 5) % 3; + indicator_led_mode = (indicator_led_mode & 0b11111100) | mode; + indicator_led(mode); + save_config(); + return MISCHIEF_MANAGED; + } + #endif // 4 clicks: exit else if (event == EV_4clicks) { blink_confirm(1); @@ -967,6 +1016,26 @@ uint8_t pseudo_rand() { #endif +#ifdef USE_INDICATOR_LED +void indicator_led(uint8_t lvl) { + switch (lvl) { + case 0: // indicator off + DDRB &= 0xff ^ (1 << AUXLED_PIN); + PORTB &= 0xff ^ (1 << AUXLED_PIN); + break; + case 1: // indicator low + DDRB &= 0xff ^ (1 << AUXLED_PIN); + PORTB |= (1 << AUXLED_PIN); + break; + default: // indicator high + DDRB |= (1 << AUXLED_PIN); + PORTB |= (1 << AUXLED_PIN); + break; + } +} +#endif // USE_INDICATOR_LED + + void load_config() { if (load_eeprom()) { ramp_style = eeprom[0]; @@ -983,6 +1052,9 @@ void load_config() { #ifdef USE_THERMAL_REGULATION therm_ceil = eeprom[11]; #endif + #ifdef USE_INDICATOR_LED + indicator_led_mode = eeprom[12]; + #endif } #ifdef START_AT_MEMORIZED_LEVEL if (load_eeprom_wl()) { @@ -1006,6 +1078,9 @@ void save_config() { #ifdef USE_THERMAL_REGULATION eeprom[11] = therm_ceil; #endif + #ifdef USE_INDICATOR_LED + eeprom[12] = indicator_led_mode; + #endif save_eeprom(); } @@ -1061,6 +1136,7 @@ void setup() { push_state(off_state, 0); #endif + } @@ -1087,6 +1163,7 @@ void loop() { // party / tactical strobe if (strobe_type < 2) { set_level(MAX_LEVEL); + CLKPR = 1<<CLKPCE; CLKPR = 0; // run at full speed if (strobe_type == 0) { // party strobe if (strobe_delays[strobe_type] < 42) delay_zero(); else nice_delay_ms(1); |