diff options
Diffstat (limited to 'ui/darkhorse')
| -rw-r--r-- | ui/darkhorse/darkhorse.c | 367 |
1 files changed, 367 insertions, 0 deletions
diff --git a/ui/darkhorse/darkhorse.c b/ui/darkhorse/darkhorse.c new file mode 100644 index 0000000..aa37b92 --- /dev/null +++ b/ui/darkhorse/darkhorse.c @@ -0,0 +1,367 @@ +/* + * DarkHorse: Improved ZebraLight clone UI for SpaghettiMonster. + * + * Copyright (C) 2017 Selene ToyKeeper + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "hwdef-Emisar_D4.h" +#define USE_LVP +#define USE_THERMAL_REGULATION +#define DEFAULT_THERM_CEIL 45 +#define USE_RAMPING +#define RAMP_LENGTH 150 +#define USE_BATTCHECK +#define BATTCHECK_4bars +#define DONT_DELAY_AFTER_BATTCHECK +#define USE_EEPROM +#define EEPROM_BYTES 5 +#include "spaghetti-monster.h" + +// FSM states +uint8_t off_state(Event event, uint16_t arg); +uint8_t low_mode_state(Event event, uint16_t arg); +uint8_t med_mode_state(Event event, uint16_t arg); +uint8_t hi_mode_state(Event event, uint16_t arg); +uint8_t strobe_beacon_state(Event event, uint16_t arg); +#ifdef USE_BATTCHECK +uint8_t battcheck_state(Event event, uint16_t arg); +#endif +// Not a FSM state, just handles stuff common to all low/med/hi states +uint8_t any_mode_state(Event event, uint16_t arg, uint8_t *primary, uint8_t *secondary, uint8_t *modes); + +void load_config(); +void save_config(); + +// toggle between L1/L2, M1/M2, H1/H2 +uint8_t L1 = 1; +uint8_t M1 = 1; +uint8_t H1 = 1; +// brightness for L2, M2, H2 (valid range 1 to 3 inclusive) +uint8_t L2 = 1; +uint8_t M2 = 1; +uint8_t H2 = 1; +// mode groups, ish +uint8_t low_modes[] = {12, 3, 5, 9}; // 3.3 lm, 2.0 lm, 0.8 lm, 0.3 lm +uint8_t med_modes[] = {56, 21, 29, 37}; // 101 lm, 35 lm, 20 lm, 10 lm +uint8_t hi_modes[] = {MAX_LEVEL, 81, 96, 113}; // 1500 lm, 678 lm, 430 lm, 270 lm +// strobe/beacon modes: +// 0: 0.2 Hz beacon at L1 +// 1: 0.2 Hz beacon at H1 +// 2: 4 Hz strobe at H1 +// 3: 19 Hz strobe at H1 +uint8_t strobe_beacon_mode = 0; + +#ifdef USE_THERMAL_REGULATION +// brightness before thermal step-down +uint8_t target_level = 0; +#endif + +void set_any_mode(uint8_t primary, uint8_t secondary, uint8_t *modes) { + // primary (H1/M1/L1) + if (primary) { + set_level(modes[0]); + } + // secondary (H2/M2/L2) + else { + set_level(modes[secondary]); + } + #ifdef USE_THERMAL_REGULATION + target_level = actual_level; + #endif +} + +inline void set_low_mode() { set_any_mode(L1, L2, low_modes); } +inline void set_med_mode() { set_any_mode(M1, M2, med_modes); } +inline void set_hi_mode() { set_any_mode(H1, H2, hi_modes); } + + +uint8_t off_state(Event event, uint16_t arg) { + // turn emitter off when entering state + if (event == EV_enter_state) { + set_level(0); + // sleep while off (lower power use) + go_to_standby = 1; + return EVENT_HANDLED; + } + // hold (initially): go to lowest level, but allow abort for regular click + else if (event == EV_click1_press) { + set_low_mode(); + return EVENT_HANDLED; + } + // 1 click (before timeout): go to high level, but allow abort for double click + else if (event == EV_click1_release) { + set_hi_mode(); + return EVENT_HANDLED; + } + // 1 click: high mode + else if (event == EV_1click) { + set_state(hi_mode_state, 0); + return EVENT_HANDLED; + } + // click, press (initially): go to medium mode, but allow abort + else if (event == EV_click2_press) { + set_med_mode(); + return EVENT_HANDLED; + } + // 2 clicks: medium mode + else if (event == EV_2clicks) { + set_state(med_mode_state, 0); + return EVENT_HANDLED; + } + // click, click, press (initially): light off, prep for blinkies + else if (event == EV_click3_press) { + set_level(0); + return EVENT_HANDLED; + } + // 3 clicks: strobe mode + else if (event == EV_3clicks) { + set_state(strobe_beacon_state, 0); + return EVENT_HANDLED; + } + #ifdef USE_BATTCHECK + // 4 clicks: battcheck mode + else if (event == EV_4clicks) { + set_state(battcheck_state, 0); + return EVENT_HANDLED; + } + #endif + // hold: go to low mode, but allow ramping up + else if (event == EV_click1_hold) { + // don't start ramping immediately; + // give the user time to release at low mode + if (arg >= HOLD_TIMEOUT) + set_state(low_mode_state, 0); + return EVENT_HANDLED; + } + // hold, release quickly: go to low mode + else if (event == EV_click1_hold_release) { + set_state(low_mode_state, 0); + return EVENT_HANDLED; + } + /* TODO: implement + // click-release-hold: discrete ramp through all levels + else if (event == EV_click2_hold) { + set_state(steady_state, MAX_LEVEL); + return EVENT_HANDLED; + } + */ + return EVENT_NOT_HANDLED; +} + + +uint8_t any_mode_state(Event event, uint16_t arg, uint8_t *primary, uint8_t *secondary, uint8_t *modes) { + // turn on LED when entering the mode + if (event == EV_enter_state) { + set_any_mode(*primary, *secondary, modes); + return EVENT_HANDLED; + } + // 1 click: off + else if (event == EV_1click) { + set_state(off_state, 0); + return EVENT_HANDLED; + } + // hold: change brightness (low, med, hi, always starting at low) + else if (event == EV_click1_hold) { + uint8_t which = arg % (HOLD_TIMEOUT * 3) / HOLD_TIMEOUT; + switch(which) { + case 0: + set_state(low_mode_state, 0); + break; + case 1: + set_state(med_mode_state, 0); + break; + case 2: + set_state(hi_mode_state, 0); + break; + } + return EVENT_HANDLED; + } + // 2 clicks: toggle primary/secondary level + else if (event == EV_2clicks) { + *primary ^= 1; + set_any_mode(*primary, *secondary, modes); + save_config(); + return EVENT_HANDLED; + } + // click-release-hold: change secondary level + else if (event == EV_click2_hold) { + if (arg % HOLD_TIMEOUT == 0) { + *secondary = (*secondary + 1) & 3; + if (! *secondary) *secondary = 1; + *primary = 0; + set_any_mode(*primary, *secondary, modes); + } + return EVENT_HANDLED; + } + // click, hold, release: save secondary level + else if (event == EV_click2_hold_release) { + save_config(); + } + #ifdef USE_THERMAL_REGULATION + // TODO: test this on a real light + // overheating: drop by an amount proportional to how far we are above the ceiling + else if (event == EV_temperature_high) { + if (actual_level > MAX_LEVEL/4) { + uint8_t stepdown = actual_level - arg; + if (stepdown < MAX_LEVEL/4) stepdown = MAX_LEVEL/4; + set_level(stepdown); + } + return EVENT_HANDLED; + } + // underheating: increase slowly if we're lower than the target + // (proportional to how low we are) + else if (event == EV_temperature_low) { + if (actual_level < target_level) { + uint8_t stepup = actual_level + (arg>>1); + if (stepup > target_level) stepup = target_level; + set_level(stepup); + } + return EVENT_HANDLED; + } + #endif + return EVENT_NOT_HANDLED; +} + +uint8_t low_mode_state(Event event, uint16_t arg) { + return any_mode_state(event, arg, &L1, &L2, low_modes); +} + +uint8_t med_mode_state(Event event, uint16_t arg) { + return any_mode_state(event, arg, &M1, &M2, med_modes); +} + +uint8_t hi_mode_state(Event event, uint16_t arg) { + return any_mode_state(event, arg, &H1, &H2, hi_modes); +} + + +#ifdef USE_BATTCHECK +uint8_t battcheck_state(Event event, uint16_t arg) { + return EVENT_NOT_HANDLED; +} +#endif + + +uint8_t strobe_beacon_state(Event event, uint16_t arg) { + // 1 click: off + if (event == EV_1click) { + set_state(off_state, 0); + return EVENT_HANDLED; + } + // 1 click (initially): cancel current blink + // FIXME: this is no longer necessary; FSM does this automatically now + if (event == EV_click1_release) { + interrupt_nice_delays(); + return EVENT_HANDLED; + } + // 2 clicks: rotate through blinky modes + else if (event == EV_2clicks) { + strobe_beacon_mode = (strobe_beacon_mode + 1) & 3; + save_config(); + interrupt_nice_delays(); + return EVENT_HANDLED; + } + return EVENT_NOT_HANDLED; +} + + +void low_voltage() { + if (current_state == hi_mode_state) { + set_state(med_mode_state, 0); + } + else if (current_state == med_mode_state) { + set_state(low_mode_state, 0); + } + else if (current_state == low_mode_state) { + set_state(off_state, 0); + } + // "step down" from blinkies to low + else if (current_state == strobe_beacon_state) { + set_state(low_mode_state, 0); + } +} + +void strobe(uint8_t level, uint16_t ontime, uint16_t offtime) { + set_level(level); + if (! nice_delay_ms(ontime)) return; + set_level(0); + nice_delay_ms(offtime); +} + +void load_config() { + if (load_eeprom()) { + H1 = !(!(eeprom[0] & 0b00000100)); + M1 = !(!(eeprom[0] & 0b00000010)); + L1 = !(!(eeprom[0] & 0b00000001)); + H2 = eeprom[1]; + M2 = eeprom[2]; + L2 = eeprom[3]; + strobe_beacon_mode = eeprom[4]; + } +} + +void save_config() { + eeprom[0] = (H1<<2) | (M1<<1) | (L1); + eeprom[1] = H2; + eeprom[2] = M2; + eeprom[3] = L2; + eeprom[4] = strobe_beacon_mode; + + save_eeprom(); +} + +void setup() { + set_level(RAMP_SIZE/8); + delay_4ms(3); + set_level(0); + + load_config(); + + push_state(off_state, 0); +} + +void loop() { + if (current_state == strobe_beacon_state) { + switch(strobe_beacon_mode) { + // 0.2 Hz beacon at L1 + case 0: + strobe(low_modes[0], 500, 4500); + break; + // 0.2 Hz beacon at H1 + case 1: + strobe(hi_modes[0], 500, 4500); + break; + // 4 Hz tactical strobe at H1 + case 2: + strobe(hi_modes[0], 83, 167); + break; + // 19 Hz tactical strobe at H1 + case 3: + strobe(hi_modes[0], 17, 35); + break; + } + } + + #ifdef USE_BATTCHECK + else if (current_state == battcheck_state) { + nice_delay_ms(500); // wait a moment to measure voltage + battcheck(); + set_state(off_state, 0); + } + #endif +} + + |