aboutsummaryrefslogtreecommitdiff
Commit message (Expand)AuthorAgeFilesLines
* added a Noctigon KR4 219 (75% FET) build targetSelene ToyKeeper2020-03-281-0/+11
* Noctigon KR4 needed tighter/faster thermal response, and Hank wants RGB rainb...Selene ToyKeeper2020-03-261-1/+3
* made thermal regulation use a smaller target window, and prioritize cooling moreSelene ToyKeeper2020-03-261-3/+3
* added dynamic underclocking to KR4 to increase moon runtime, fixed ramp miles...Selene ToyKeeper2020-03-212-15/+11
* fixed potential eeprom corruption after turning boost/opamp chip on/offSelene ToyKeeper2020-03-211-0/+16
* enabled soft factory reset on KR4, raised default floor to the lowest reliabl...Selene ToyKeeper2020-03-202-2/+4
* added reboot() support for tiny1634Selene ToyKeeper2020-03-201-8/+10
* removed old thermal junk and voltage_lowpass junk from cfg filesSelene ToyKeeper2020-03-163-29/+0
* fixed calc_voltage_divider() (use 10-bit calibration values, not 8-bit)Selene ToyKeeper2020-03-161-1/+1
* merged fsm branch (to get adc-rework branch with new thermal regulation)Selene ToyKeeper2020-03-1632-410/+367
|\
| * merged adc-rework branch, which rewrote all ADC code (voltage, temperature, a...Selene ToyKeeper2020-03-1631-408/+365
| |\
| | * fixed a few things in ramping-ui, rampingiosv3, and werner's UISelene ToyKeeper2020-03-163-14/+13
| | * merged some misc fixes from pakutrai, cleaned up comments, removed unused sym...Selene ToyKeeper2020-03-1615-87/+18
| | * increased blink speed slightly, and added a library function to blink out 16-...Selene ToyKeeper2020-03-161-3/+25
| | * deleted commented-out WDT code from previous revisionSelene ToyKeeper2020-03-161-7/+0
| | * cleaned up WDT ADC timer code slightly, and removed a bit of redundant codeSelene ToyKeeper2020-03-161-6/+8
| | * reduced regulation jitter by biasing errors toward zero by a constant amount,Selene ToyKeeper2020-03-161-1/+14
| | * the ADC sample count doesn't need to be 16-bit any more, and isn't really a c...Selene ToyKeeper2020-03-152-3/+4
| | * removed dead comments and dead codeSelene ToyKeeper2020-03-151-28/+2
| | * replaced temperature_timer (which wasn't even being used) with a variable del...Selene ToyKeeper2020-03-151-27/+43
| | * tried to make thermal code a bit less twitchy...Selene ToyKeeper2020-03-133-13/+19
| | * went back to slower clk/128 ADC timingSelene ToyKeeper2020-03-139-9/+9
| | * went back to continuous lowpass because it had the best noise reductionSelene ToyKeeper2020-02-282-52/+74
| | * brute force method for reducing ADC noise -- average a ridiculous number of s...Selene ToyKeeper2020-02-052-20/+14
| | * still doesn't work, but at least it's a bit less broken than before...Selene ToyKeeper2020-02-051-8/+12
| | * first pass at a smaller simpler thermal regulation algorithm...Selene ToyKeeper2020-02-051-75/+52
| | * replaced Anduril's gradual adjustment speed code with a smaller simpler versionSelene ToyKeeper2020-02-051-43/+17
| | * saving state of ADC / WDT refactoring before doing more changes... what chan...Selene ToyKeeper2020-01-305-76/+59
| | * switched to a pseudo-rolling-average method to reduce noise, set prescaler ba...Selene ToyKeeper2020-01-3010-17/+22
| | * increased effective ADC resolution by switching from continuous-lowpass to su...Selene ToyKeeper2020-01-291-64/+43
| | * remove truncation noise by adding 0.5 to each resultSelene ToyKeeper2020-01-291-24/+22
| | * rewrote ADC code to use a continuous lowpass system on all measurements, to e...Selene ToyKeeper2020-01-2914-139/+203
| * | mention the maximum allowed temperature in the manualSelene ToyKeeper2020-02-031-1/+1
| |/
* | added FETless KR4 build target, calibrated other KR4 therm faster level betterSelene ToyKeeper2020-03-162-2/+47
* | fixed the ADC channel for voltage measurementSelene ToyKeeper2020-03-061-2/+2
* | FET ramp was too steep; slowed it down by 50% (20 steps -> 30 steps)Selene ToyKeeper2020-03-061-11/+10
* | KR4: added FET channel, measured output, calibrated rampSelene ToyKeeper2020-03-062-5/+13
* | initial support for Noctigon KR4Selene ToyKeeper2020-03-054-0/+223
* | merged from fsm, mostly to get thermal regulation updatesSelene ToyKeeper2019-12-177-9/+187
|\|
| * fixed too-slow thermal response (was introduced in the irq-refactor branch)Selene ToyKeeper2019-12-171-5/+8
| * added support for Fireflies ROT66 G2 and PL47 G2Selene ToyKeeper2019-12-112-0/+109
| * added a compile-time flag to enable/disable momentary mode (suggested by Agro)Selene ToyKeeper2019-12-041-1/+18
| * fixed compile errors to handle a couple USE_ flags better:Selene ToyKeeper2019-12-041-2/+8
| * added a FW3A build with the FET turned off completelySelene ToyKeeper2019-12-031-0/+36
| * adjusted lantern tint ramping power correction again, based on measurements o...Selene ToyKeeper2019-12-031-1/+1
| * adjusted BLF Lantern (Sofirn LT1) tint ramping power correction factor to mat...Selene ToyKeeper2019-11-292-1/+8
* | changed voltage colors to better match Noctigon K1Selene ToyKeeper2019-11-282-5/+5
* | renamed Emisar D1S V2 -> Noctigon K1Selene ToyKeeper2019-11-252-6/+8
* | merged upstream fsm branchSelene ToyKeeper2019-11-2511-31/+73
|\|
| * enabled muggle mode again in all build targets, since it fits nowSelene ToyKeeper2019-11-244-23/+0
generated by cgit v1.2.3 (git 2.25.1) at 2026-03-28 21:20:15 +0000