aboutsummaryrefslogtreecommitdiff
Commit message (Expand)AuthorAgeFilesLines
* added config which matches the spec for K1-SBT90.2, but it's not tested (ther...Selene ToyKeeper2020-04-282-0/+200
* calibrated K1 and K1-12V thermal response (smaller, slower) and candle mode (...Selene ToyKeeper2020-04-272-2/+16
* set default thermal response magnitude back to how it was before the KR4 upda...Selene ToyKeeper2020-04-272-2/+3
* applied ADC rewrite updates to most recent build targetsSelene ToyKeeper2020-04-264-15/+3
* merged Noctigon KR4 branch, including recent ADC+thermal rewriteSelene ToyKeeper2020-04-2638-429/+657
|\
| * added tweakable thermal_response_magnitude option, adjusted KR4 thermal vars,...Selene ToyKeeper2020-04-192-12/+12
| * made thermal response larger when error is large, smaller when error is smallSelene ToyKeeper2020-04-191-2/+8
| * KR4-noFET: made candle mode vary more since the ramp is stretched out, raised...Selene ToyKeeper2020-04-191-2/+5
| * anduril: made aux RGB rainbow mode speed configurable per build targetSelene ToyKeeper2020-04-191-1/+4
| * added a Noctigon KR4 219 (75% FET) build targetSelene ToyKeeper2020-03-281-0/+11
| * Noctigon KR4 needed tighter/faster thermal response, and Hank wants RGB rainb...Selene ToyKeeper2020-03-261-1/+3
| * made thermal regulation use a smaller target window, and prioritize cooling moreSelene ToyKeeper2020-03-261-3/+3
| * added dynamic underclocking to KR4 to increase moon runtime, fixed ramp miles...Selene ToyKeeper2020-03-212-15/+11
| * fixed potential eeprom corruption after turning boost/opamp chip on/offSelene ToyKeeper2020-03-211-0/+16
| * enabled soft factory reset on KR4, raised default floor to the lowest reliabl...Selene ToyKeeper2020-03-202-2/+4
| * added reboot() support for tiny1634Selene ToyKeeper2020-03-201-8/+10
| * removed old thermal junk and voltage_lowpass junk from cfg filesSelene ToyKeeper2020-03-163-29/+0
| * fixed calc_voltage_divider() (use 10-bit calibration values, not 8-bit)Selene ToyKeeper2020-03-161-1/+1
| * merged fsm branch (to get adc-rework branch with new thermal regulation)Selene ToyKeeper2020-03-1632-410/+367
| |\
| | * merged adc-rework branch, which rewrote all ADC code (voltage, temperature, a...Selene ToyKeeper2020-03-1631-408/+365
| | |\
| | | * fixed a few things in ramping-ui, rampingiosv3, and werner's UISelene ToyKeeper2020-03-163-14/+13
| | | * merged some misc fixes from pakutrai, cleaned up comments, removed unused sym...Selene ToyKeeper2020-03-1615-87/+18
| | | * increased blink speed slightly, and added a library function to blink out 16-...Selene ToyKeeper2020-03-161-3/+25
| | | * deleted commented-out WDT code from previous revisionSelene ToyKeeper2020-03-161-7/+0
| | | * cleaned up WDT ADC timer code slightly, and removed a bit of redundant codeSelene ToyKeeper2020-03-161-6/+8
| | | * reduced regulation jitter by biasing errors toward zero by a constant amount,Selene ToyKeeper2020-03-161-1/+14
| | | * the ADC sample count doesn't need to be 16-bit any more, and isn't really a c...Selene ToyKeeper2020-03-152-3/+4
| | | * removed dead comments and dead codeSelene ToyKeeper2020-03-151-28/+2
| | | * replaced temperature_timer (which wasn't even being used) with a variable del...Selene ToyKeeper2020-03-151-27/+43
| | | * tried to make thermal code a bit less twitchy...Selene ToyKeeper2020-03-133-13/+19
| | | * went back to slower clk/128 ADC timingSelene ToyKeeper2020-03-139-9/+9
| | | * went back to continuous lowpass because it had the best noise reductionSelene ToyKeeper2020-02-282-52/+74
| | | * brute force method for reducing ADC noise -- average a ridiculous number of s...Selene ToyKeeper2020-02-052-20/+14
| | | * still doesn't work, but at least it's a bit less broken than before...Selene ToyKeeper2020-02-051-8/+12
| | | * first pass at a smaller simpler thermal regulation algorithm...Selene ToyKeeper2020-02-051-75/+52
| | | * replaced Anduril's gradual adjustment speed code with a smaller simpler versionSelene ToyKeeper2020-02-051-43/+17
| | | * saving state of ADC / WDT refactoring before doing more changes... what chan...Selene ToyKeeper2020-01-305-76/+59
| | | * switched to a pseudo-rolling-average method to reduce noise, set prescaler ba...Selene ToyKeeper2020-01-3010-17/+22
| | | * increased effective ADC resolution by switching from continuous-lowpass to su...Selene ToyKeeper2020-01-291-64/+43
| | | * remove truncation noise by adding 0.5 to each resultSelene ToyKeeper2020-01-291-24/+22
| | | * rewrote ADC code to use a continuous lowpass system on all measurements, to e...Selene ToyKeeper2020-01-2914-139/+203
| | * | mention the maximum allowed temperature in the manualSelene ToyKeeper2020-02-031-1/+1
| | |/
| * | added FETless KR4 build target, calibrated other KR4 therm faster level betterSelene ToyKeeper2020-03-162-2/+47
| * | fixed the ADC channel for voltage measurementSelene ToyKeeper2020-03-061-2/+2
| * | FET ramp was too steep; slowed it down by 50% (20 steps -> 30 steps)Selene ToyKeeper2020-03-061-11/+10
| * | KR4: added FET channel, measured output, calibrated rampSelene ToyKeeper2020-03-062-5/+13
| * | initial support for Noctigon KR4Selene ToyKeeper2020-03-054-0/+223
* | | fixed eeprom corruption after turning boost chip on/offSelene ToyKeeper2020-02-271-0/+16
* | | K1 12V needs party strobe slowed down even moreSelene ToyKeeper2020-02-261-1/+1
* | | added support for boost PMIC enable pin (K1 12V has 2 pins which need to turn...Selene ToyKeeper2020-02-252-2/+12
generated by cgit v1.2.3 (git 2.25.1) at 2026-03-28 20:59:16 +0000