aboutsummaryrefslogtreecommitdiff
Commit message (Expand)AuthorAgeFilesLines
...
| * post-off voltage display: use low brightness when torch was at moon level bef...Selene ToyKeeper2023-05-027-12/+30
| * added Wurkkos FC13 and TS11Selene ToyKeeper2023-05-023-2/+43
| * post-off voltage display was slightly too long, default to 4s, not 5sSelene ToyKeeper2023-05-021-1/+1
| * RGB buttons: while torch is on, use low mode below a configured levelSelene ToyKeeper2023-05-021-1/+2
| * documented post-off voltage display configSelene ToyKeeper2023-05-021-57/+64
| * converted Wurkkos TS25 build...Selene ToyKeeper2023-05-024-150/+273
| * D4v2: added the rest of the aux RGB colors as channel modes,Selene ToyKeeper2023-05-024-11/+52
| * made "post-off voltage display" user-configurable in battcheck 7H menu item 2Selene ToyKeeper2023-05-025-2/+29
| * fixed bug: channel change could stick when activating a config menu from batt...Selene ToyKeeper2023-05-021-1/+15
| * documented ramp 6C, ramp 4H, lockout 3H, and battcheck 3CSelene ToyKeeper2023-05-021-2/+15
| * bin/flash-1616.py: added shebang header and +x bitSelene ToyKeeper2023-05-021-1/+3
| * added ability to set channel mode for number readouts (batt check, temp check...Selene ToyKeeper2023-05-026-5/+39
| * converted Wurkkos TS10 build (and made its ramp smoother w/ better low modes)Selene ToyKeeper2023-05-026-148/+259
| * documented a couple recent changesSelene ToyKeeper2023-04-301-0/+4
| * converted Emisar D4Sv2 build, and updated it to use dynamic PWMSelene ToyKeeper2023-04-295-151/+300
| * converted KR4-nofet buildSelene ToyKeeper2023-04-293-9/+52
| * D4v2 can use 8-bit ramp tables tooSelene ToyKeeper2023-04-293-8/+8
| * KR4: ramp can use 8 bits, since values never go over 255Selene ToyKeeper2023-04-293-7/+12
| * missed this file on previous commitSelene ToyKeeper2023-04-291-26/+29
| * Noctigon KR4: updated to use new channel systemSelene ToyKeeper2023-04-2910-282/+402
| * just a todo note for laterSelene ToyKeeper2023-04-291-0/+1
| * lockout mode: fixed manual memory timer and tint, added 3H next channel,Selene ToyKeeper2023-04-291-5/+23
| * D4v2: tweaked ramp to make it smootherSelene ToyKeeper2023-04-281-9/+8
| * D4v2 FET+1 model: works again, and now uses dynamic PWM (lower lows)Selene ToyKeeper2023-04-285-35/+190
| * RGB aux: always preview in high mode, and show voltage during 3-second post-o...Selene ToyKeeper2023-04-281-4/+7
| * changed lockout RGB aux default to blinking voltage, instead of blinking discoSelene ToyKeeper2023-04-281-1/+2
| * only use 2-color strobe in tactical mode if it's on main LEDs, not auxSelene ToyKeeper2023-04-281-1/+4
| * tactical mode: use police strobe by default, if it existsSelene ToyKeeper2023-04-271-2/+6
| * Noctigon KR4-tintramp updated to use new channel systemSelene ToyKeeper2023-04-272-7/+7
| * whitespace cleanupSelene ToyKeeper2023-04-261-5/+5
| * change channel mode per config step in channel mode menuSelene ToyKeeper2023-04-264-6/+34
| * made sleep voltage work on attiny1616 againSelene ToyKeeper2023-04-263-6/+31
| * put RGB aux LEDs in high mode for 3 seconds after light goes to sleepSelene ToyKeeper2023-04-252-2/+4
| * fixed bug behind K93_LOCKOUT_KLUDGE which could exit lockout in solid aux modeSelene ToyKeeper2023-04-2515-40/+16
| * updated D4Sv2-tintramp -> Emisar 2-channel build target ...Selene ToyKeeper2023-04-258-85/+555
| * added stepped tint rampingSelene ToyKeeper2023-04-199-52/+227
| * LT1S Pro: added white-only auto-tint mode, at gchart's requestSelene ToyKeeper2023-04-193-20/+81
| * made "Ramp 3H" do momentary turbo if current channel mode has no argsSelene ToyKeeper2023-04-174-19/+34
| * LT1S Pro: raised the ramp a bit; it seemed too low in the middleSelene ToyKeeper2023-04-171-2/+9
| * switched the rest of FSM + Anduril to use SPDX license headersSelene ToyKeeper2023-04-17176-1660/+778
| * reduced ROM by ~600 bytes by moving all eeprom config values to a "cfg" structSelene ToyKeeper2023-04-1630-664/+580
| * added ability to use 2 colors in config modeSelene ToyKeeper2023-04-153-49/+46
| * enable sunset timer in Extended Simple UISelene ToyKeeper2023-04-151-1/+1
| * adapted smooth-sunset patch from SammysHPSelene ToyKeeper2023-04-154-95/+41
| * LT1S Pro: added manual memory with a timer by default, like on SP10 ProSelene ToyKeeper2023-04-151-0/+6
| * merged gcharts config updates for BLF Q8 t1616Selene ToyKeeper2023-04-151-2/+11
| * added gchart's Extended Simple UI (strobes and aux config in simple mode)Selene ToyKeeper2023-04-152-36/+81
| * LT1S Pro: reduced visibility of PWM by dropping the TOP values fasterSelene ToyKeeper2023-04-151-9/+7
| * LT1S: added thermal regulationSelene ToyKeeper2023-04-145-125/+243
| * LT1S Pro: after measuring, perhaps low aux mode is better after allSelene ToyKeeper2023-04-141-2/+10
generated by cgit v1.2.3 (git 2.25.1) at 2026-03-28 20:12:50 +0000